mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
5568f47259
This brings back USRobotics USR8200 support to the IXP4xx target. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
133 lines
4.0 KiB
Diff
133 lines
4.0 KiB
Diff
From 6599df775e2cbb4988bdf8239acf4fbec70e5ef9 Mon Sep 17 00:00:00 2001
|
|
From: Linus Walleij <linus.walleij@linaro.org>
|
|
Date: Sat, 23 Sep 2023 20:38:22 +0200
|
|
Subject: [PATCH 3/4] net: ixp4xx_eth: Support changing the MTU
|
|
|
|
As we don't specify the MTU in the driver, the framework
|
|
will fall back to 1500 bytes and this doesn't work very
|
|
well when we try to attach a DSA switch:
|
|
|
|
eth1: mtu greater than device maximum
|
|
ixp4xx_eth c800a000.ethernet eth1: error -22 setting
|
|
MTU to 1504 to include DSA overhead
|
|
|
|
After locating an out-of-tree patch in OpenWrt I found
|
|
suitable code to set the MTU on the interface and ported
|
|
it and updated it. Now the MTU gets set properly.
|
|
|
|
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
|
|
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
---
|
|
drivers/net/ethernet/xscale/ixp4xx_eth.c | 65 +++++++++++++++++++++++-
|
|
1 file changed, 64 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
|
|
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
|
|
@@ -24,6 +24,7 @@
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/etherdevice.h>
|
|
+#include <linux/if_vlan.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/net_tstamp.h>
|
|
@@ -63,7 +64,15 @@
|
|
|
|
#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
|
|
#define REGS_SIZE 0x1000
|
|
-#define MAX_MRU 1536 /* 0x600 */
|
|
+
|
|
+/* MRU is said to be 14320 in a code dump, the SW manual says that
|
|
+ * MRU/MTU is 16320 and includes VLAN and ethernet headers.
|
|
+ * See "IXP400 Software Programmer's Guide" section 10.3.2, page 161.
|
|
+ *
|
|
+ * FIXME: we have chosen the safe default (14320) but if you can test
|
|
+ * jumboframes, experiment with 16320 and see what happens!
|
|
+ */
|
|
+#define MAX_MRU (14320 - VLAN_ETH_HLEN)
|
|
#define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
|
|
|
|
#define NAPI_WEIGHT 16
|
|
@@ -1182,6 +1191,54 @@ static void destroy_queues(struct port *
|
|
}
|
|
}
|
|
|
|
+static int ixp4xx_do_change_mtu(struct net_device *dev, int new_mtu)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ struct npe *npe = port->npe;
|
|
+ int framesize, chunks;
|
|
+ struct msg msg = {};
|
|
+
|
|
+ /* adjust for ethernet headers */
|
|
+ framesize = new_mtu + VLAN_ETH_HLEN;
|
|
+ /* max rx/tx 64 byte chunks */
|
|
+ chunks = DIV_ROUND_UP(framesize, 64);
|
|
+
|
|
+ msg.cmd = NPE_SETMAXFRAMELENGTHS;
|
|
+ msg.eth_id = port->id;
|
|
+
|
|
+ /* Firmware wants to know buffer size in 64 byte chunks */
|
|
+ msg.byte2 = chunks << 8;
|
|
+ msg.byte3 = chunks << 8;
|
|
+
|
|
+ msg.byte4 = msg.byte6 = framesize >> 8;
|
|
+ msg.byte5 = msg.byte7 = framesize & 0xff;
|
|
+
|
|
+ if (npe_send_recv_message(npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
|
|
+ return -EIO;
|
|
+ netdev_dbg(dev, "set MTU on NPE %s to %d bytes\n",
|
|
+ npe_name(npe), new_mtu);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ixp4xx_eth_change_mtu(struct net_device *dev, int new_mtu)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ /* MTU can only be changed when the interface is up. We also
|
|
+ * set the MTU from dev->mtu when opening the device.
|
|
+ */
|
|
+ if (dev->flags & IFF_UP) {
|
|
+ ret = ixp4xx_do_change_mtu(dev, new_mtu);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ dev->mtu = new_mtu;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int eth_open(struct net_device *dev)
|
|
{
|
|
struct port *port = netdev_priv(dev);
|
|
@@ -1232,6 +1289,8 @@ static int eth_open(struct net_device *d
|
|
if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
|
|
return -EIO;
|
|
|
|
+ ixp4xx_do_change_mtu(dev, dev->mtu);
|
|
+
|
|
if ((err = request_queues(port)) != 0)
|
|
return err;
|
|
|
|
@@ -1374,6 +1433,7 @@ static int eth_close(struct net_device *
|
|
static const struct net_device_ops ixp4xx_netdev_ops = {
|
|
.ndo_open = eth_open,
|
|
.ndo_stop = eth_close,
|
|
+ .ndo_change_mtu = ixp4xx_eth_change_mtu,
|
|
.ndo_start_xmit = eth_xmit,
|
|
.ndo_set_rx_mode = eth_set_mcast_list,
|
|
.ndo_eth_ioctl = eth_ioctl,
|
|
@@ -1488,6 +1548,9 @@ static int ixp4xx_eth_probe(struct platf
|
|
ndev->dev.dma_mask = dev->dma_mask;
|
|
ndev->dev.coherent_dma_mask = dev->coherent_dma_mask;
|
|
|
|
+ ndev->min_mtu = ETH_MIN_MTU;
|
|
+ ndev->max_mtu = MAX_MRU;
|
|
+
|
|
netif_napi_add_weight(ndev, &port->napi, eth_poll, NAPI_WEIGHT);
|
|
|
|
if (!(port->npe = npe_request(NPE_ID(port->id))))
|