mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
34d2964554
Fixes issues with RTL8156 2.5G USB adapters
- # ethtool eth1
Settings for eth1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 2500Mb/s
Duplex: Half
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
- #
- r8152: break the loop when the budget is exhausted
- r8152: Block future register access if register access fails
- r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
- r8152: add vendor/device ID pair for D-Link DUB-E250
- r8152: try to use a normal budget
- r8152: set bp in bulk
- r8152: adjust generic_ocp_write function
- r8152: fix the autosuspend doesn't work
- r8152: Add __GFP_NOWARN to big allocations
- r8152: reduce the control transfer of rtl8152_get_version()
- r8152: remove rtl_vendor_mode function
- r8152: avoid to change cfg for all devices
- r8152: add USB device driver for config selection
- r8152: use napi_gro_frags
- cdc_ether: no need to blacklist any r8152 devices
- cdc_ether: add u-blox 0x1313 composition
Build system: x86_64
Build-tested: bcm2711, rockchip, x86/64
Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64
Signed-off-by: Marty Jones <mj8263788@gmail.com>
40 lines
1.3 KiB
Diff
40 lines
1.3 KiB
Diff
From 72f93a3136ee18fd59fa6579f84c07e93424681e Mon Sep 17 00:00:00 2001
|
|
From: Antonio Napolitano <anton@polit.no>
|
|
Date: Sat, 26 Aug 2023 01:05:50 +0200
|
|
Subject: [PATCH] r8152: add vendor/device ID pair for D-Link DUB-E250
|
|
|
|
The D-Link DUB-E250 is an RTL8156 based 2.5G Ethernet controller.
|
|
|
|
Add the vendor and product ID values to the driver. This makes Ethernet
|
|
work with the adapter.
|
|
|
|
Signed-off-by: Antonio Napolitano <anton@polit.no>
|
|
Link: https://lore.kernel.org/r/CV200KJEEUPC.WPKAHXCQJ05I@mercurius
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
---
|
|
drivers/net/usb/r8152.c | 1 +
|
|
include/linux/usb/r8152.h | 1 +
|
|
2 files changed, 2 insertions(+)
|
|
|
|
|
|
--- a/include/linux/usb/r8152.h
|
|
+++ b/include/linux/usb/r8152.h
|
|
@@ -29,6 +29,7 @@
|
|
#define VENDOR_ID_LINKSYS 0x13b1
|
|
#define VENDOR_ID_NVIDIA 0x0955
|
|
#define VENDOR_ID_TPLINK 0x2357
|
|
+#define VENDOR_ID_DLINK 0x2001
|
|
|
|
#if IS_REACHABLE(CONFIG_USB_RTL8152)
|
|
extern u8 rtl8152_get_version(struct usb_interface *intf);
|
|
--- a/drivers/net/usb/r8152.c
|
|
+++ b/drivers/net/usb/r8152.c
|
|
@@ -9846,6 +9846,7 @@ static const struct usb_device_id rtl815
|
|
{ USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041) },
|
|
{ USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff) },
|
|
{ USB_DEVICE(VENDOR_ID_TPLINK, 0x0601) },
|
|
+ { USB_DEVICE(VENDOR_ID_DLINK, 0xb301) },
|
|
{}
|
|
};
|
|
|