ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 00:41:17 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
bd242a42a6
openwrt/target/linux/bcm27xx/patches-6.1/950-0193-media-i2c-imx258-Support-for-the-Sony-IMX258-sensor.patch
Álvaro Fernández Rojas 793f8ab62c bcm27xx: 6.1: add kernel patches 
Add kernel patches for version 6.1.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-09 19:12:30 +02:00

1622 lines
46 KiB
Diff
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

From f0fa50f3ed5ff5089cb8ff3e204d12db576d6c05 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 15 Jun 2021 18:18:42 +0100
Subject: [PATCH] media: i2c: imx258: Support for the Sony IMX258
sensor
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
media: i2c: imx258: Remove unused defines
The IMX258_FLL_* defines are unused. Remove them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Make image geometry meet sensor requirements
The output image is defined as being 4208x3118 pixels in size.
Y_ADD_STA register was set to 0, and Y_ADD_END to 3118, giving
3119 lines total.
The datasheet lists a requirement for Y_ADD_STA to be a multiple
of a power of 2 depending on binning/scaling mode (2 for full pixel,
4 for x2-bin/scale, 8 for (x2-bin)+(x2-subsample) or x4-bin, or 16
for (x4-bin)+(x2-subsample)).
(Y_ADD_END – Y_ADD_STA + 1) also has to be a similar power of 2.
The current configuration for the full res modes breaks that second
requirement, and we can't increase Y_ADD_STA to 1 to retain exactly
the same field of view as that then breaks the first requirement.
For the binned modes, they are worse off as 3118 is not a multiple of
4.
Increase the main mode to 4208x3120 so that it is the same FOV as the
binned modes, with Y_ADD_STA at 0.
Fix Y_ADD_STA and Y_ADD_END for the binned modes so that they meet the
sensor requirements.
This does change the Bayer order as the default configuration is for
H&V flips to be enabled, so readout is from Y_STA_END to Y_ADD_STA,
and this patch has changed Y_STA_END.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Disable digital cropping on binned modes
The binned modes set DIG_CROP_X_OFFSET and DIG_CROP_IMAGE_WIDTH
to less than the full image, even though the image being captured
is meant to be a scaled version of the full array size.
Reduce X_OFFSET to 0, and increase IMAGE_WIDTH to the full array.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Implement HFLIP and VFLIP controls.
The sensor supports H & V flips, so implement the relevant controls.
Note that the Bayer order changes with these flips, therefore
they set the V4L2_CTRL_FLAG_MODIFY_LAYOUT property.
As we now support flips, remove the restriction of the sensor only
probing if rotated 180 degrees, but do take that value and initialise
VFLIP and HFLIP based on it.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Remove redundant I2C writes.
Registers 0x0202 and 0x0203 are written via the control handler
for V4L2_CID_EXPOSURE, so are not needed from the mode lists.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Add regulator control
The device tree bindings define the relevant regulators for the
sensor, so update the driver to request the regulators and control
them at the appropriate times.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Make V4L2_CID_VBLANK configurable.
The values and ranges of V4L2_CID_VBLANK are all computed,
so there is no reason for it to be a read only control.
Remove the register values from the mode lists, add the
handler, and remove the read only flag.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Register the ctrls from fwnode properties
Use v4l2_ctrl_new_fwnode_properties to register the standard
fwnode properties for the driver.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Add support for 24MHz clock
There's no reason why the clock must be 19.2MHz and nothing
else (indeed this isn't even a frequency listed in the datasheet),
so add support for 24MHz as well.
The PLL settings result in slightly different link frequencies,
so parameterise those.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Add support for running on 2 CSI data lanes
Extends the driver to also support 2 data lanes.
Frame rates are obviously more restricted on 2 lanes, but some
hardware simply hasn't wired more up.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Follow normal V4L2 behaviours for clipping exposure
V4L2 sensor drivers are expected are expected to clip the supported
exposure range based on the VBLANK configured.
IMX258 wasn't doing that as register 0x350 (FRM_LENGTH_CTL)
switches it to a mode where frame length tracks coarse exposure time.
Disable this mode and clip the range for V4L2_CID_EXPOSURE appropriately
based on V4L2_CID_VBLANK.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Add get_selection for pixel array information
Libcamera requires the cropping information for each mode, so
add this information to the driver.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Allow configuration of clock lane behaviour
The sensor supports the clock lane either remaining in HS mode
during frame blanking, or dropping to LP11.
Add configuration of the mode via V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Correct max FRM_LENGTH_LINES value
The data sheet states that the maximum value for registers
0x0340/0x0341 FRM_LENGTH_LINES is 65525(decimal), not the
0xFFFF defined in this driver. Correct this limit.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Add support for long exposure modes
The sensor has a register CIT_LSHIFT which extends the exposure
and frame times by the specified power of 2 for longer
exposure times.
Add support for this by configuring this register via V4L2_CID_VBLANK
and extending the V4L2_CID_EXPOSURE range accordingly.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Issue reset before starting streaming
Whilst not documented, register 0x0103 bit 0 is the soft
reset for the sensor, so send it before trying to configure
the sensor.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Set pixel_rate range to the same as the value
With a read only control there is limited point in advertising
a minimum and maximum for the control, so change to set the
value, min, and max all to the selected pixel rate.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Support faster pixel rate on binned modes
With the binned modes, there is little point in faithfully
reproducing the horizontal line length of 5352 pixels on the CSI2
bus, and the FIFO between the pixel array and MIPI serialiser
allows us to remove that dependency.
Allow the pixel array to run with the normal settings, with the MIPI
serialiser at half the rate. This requires some additional
information for the link frequency to pixel rate function that
needs to be added to the configuration tables.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: dt-bindings: imx258: Add alternate compatible strings
There are a number of variants of the imx258 modules that can not
be differentiated at runtime, so add compatible strings for them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: i2c: imx258: Change register settings for variants of the sensor
Sony have advised that there are variants of the IMX258 sensor which
require slightly different register configuration to the mainline
imx258 driver defaults.
There is no available run-time detection for the variant, so add
configuration via the DT compatible string.
The Vision Components imx258 module supports PDAF, so add the
register differences for that variant
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
.../devicetree/bindings/media/i2c/imx258.yaml | 3 +
drivers/media/i2c/imx258.c | 807 +++++++++++++++---
2 files changed, 676 insertions(+), 134 deletions(-)
--- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
@@ -14,10 +14,13 @@ description: |-
type stacked image sensor with a square pixel array of size 4208 x 3120. It
is programmable through I2C interface. Image data is sent through MIPI
CSI-2.
+ There are a number of variants of the sensor which cannot be detected at
+ runtime, so multiple compatible strings are required to differentiate these.
properties:
compatible:
const: sony,imx258
+ const: sony,imx258-pdaf
assigned-clocks: true
assigned-clock-parents: true
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -7,8 +7,10 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
#include <asm/unaligned.h>
#define IMX258_REG_VALUE_08BIT 1
@@ -18,6 +20,8 @@
#define IMX258_MODE_STANDBY 0x00
#define IMX258_MODE_STREAMING 0x01
+#define IMX258_REG_RESET 0x0103
+
/* Chip ID */
#define IMX258_REG_CHIP_ID 0x0016
#define IMX258_CHIP_ID 0x0258
@@ -26,23 +30,20 @@
#define IMX258_VTS_30FPS 0x0c50
#define IMX258_VTS_30FPS_2K 0x0638
#define IMX258_VTS_30FPS_VGA 0x034c
-#define IMX258_VTS_MAX 0xffff
+#define IMX258_VTS_MAX 65525
-/*Frame Length Line*/
-#define IMX258_FLL_MIN 0x08a6
-#define IMX258_FLL_MAX 0xffff
-#define IMX258_FLL_STEP 1
-#define IMX258_FLL_DEFAULT 0x0c98
-
-/* HBLANK control - read only */
-#define IMX258_PPL_DEFAULT 5352
+#define IMX258_REG_VTS 0x0340
/* Exposure control */
#define IMX258_REG_EXPOSURE 0x0202
+#define IMX258_EXPOSURE_OFFSET 10
#define IMX258_EXPOSURE_MIN 4
#define IMX258_EXPOSURE_STEP 1
#define IMX258_EXPOSURE_DEFAULT 0x640
-#define IMX258_EXPOSURE_MAX 65535
+#define IMX258_EXPOSURE_MAX (IMX258_VTS_MAX - IMX258_EXPOSURE_OFFSET)
+
+/* HBLANK control - read only */
+#define IMX258_PPL_DEFAULT 5352
/* Analog gain control */
#define IMX258_REG_ANALOG_GAIN 0x0204
@@ -70,16 +71,28 @@
#define IMX258_HDR_RATIO_STEP 1
#define IMX258_HDR_RATIO_DEFAULT 0x0
+/* Long exposure multiplier */
+#define IMX258_LONG_EXP_SHIFT_MAX 7
+#define IMX258_LONG_EXP_SHIFT_REG 0x3002
+
/* Test Pattern Control */
#define IMX258_REG_TEST_PATTERN 0x0600
+#define IMX258_CLK_BLANK_STOP 0x4040
+
/* Orientation */
#define REG_MIRROR_FLIP_CONTROL 0x0101
-#define REG_CONFIG_MIRROR_FLIP 0x03
+#define REG_CONFIG_MIRROR_HFLIP 0x01
+#define REG_CONFIG_MIRROR_VFLIP 0x02
#define REG_CONFIG_FLIP_TEST_PATTERN 0x02
-/* Input clock frequency in Hz */
-#define IMX258_INPUT_CLOCK_FREQ 19200000
+/* IMX258 native and active pixel array size. */
+#define IMX258_NATIVE_WIDTH 4224U
+#define IMX258_NATIVE_HEIGHT 3192U
+#define IMX258_PIXEL_ARRAY_LEFT 8U
+#define IMX258_PIXEL_ARRAY_TOP 16U
+#define IMX258_PIXEL_ARRAY_WIDTH 4208U
+#define IMX258_PIXEL_ARRAY_HEIGHT 3120U
struct imx258_reg {
u16 address;
@@ -91,12 +104,22 @@ struct imx258_reg_list {
const struct imx258_reg *regs;
};
+struct imx258_link_cfg {
+ unsigned int lf_to_pix_rate_factor;
+ struct imx258_reg_list reg_list;
+};
+
+#define IMX258_LANE_CONFIGS 2
+#define IMX258_2_LANE_MODE 0
+#define IMX258_4_LANE_MODE 1
+
/* Link frequency config */
struct imx258_link_freq_config {
+ u64 link_frequency;
u32 pixels_per_line;
- /* PLL registers for this link frequency */
- struct imx258_reg_list reg_list;
+ /* Configuration for this link frequency / num lanes selection */
+ struct imx258_link_cfg link_cfg[IMX258_LANE_CONFIGS];
};
/* Mode : resolution and related config&values */
@@ -114,10 +137,37 @@ struct imx258_mode {
u32 link_freq_index;
/* Default register values */
struct imx258_reg_list reg_list;
+
+ /* Analog crop rectangle. */
+ struct v4l2_rect crop;
+};
+
+/* 4208x3120 needs 1267Mbps/lane, 4 lanes. Use that rate on 2 lanes as well */
+static const struct imx258_reg mipi_1267mbps_19_2mhz_2l[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
+ { 0x0301, 0x0A },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x03 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0xC6 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+
+ { 0x0114, 0x01 },
+ { 0x0820, 0x09 },
+ { 0x0821, 0xa6 },
+ { 0x0822, 0x66 },
+ { 0x0823, 0x66 },
};
-/* 4208x3118 needs 1267Mbps/lane, 4 lanes */
-static const struct imx258_reg mipi_data_rate_1267mbps[] = {
+static const struct imx258_reg mipi_1267mbps_19_2mhz_4l[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
{ 0x0301, 0x05 },
{ 0x0303, 0x02 },
{ 0x0305, 0x03 },
@@ -129,13 +179,61 @@ static const struct imx258_reg mipi_data
{ 0x030E, 0x00 },
{ 0x030F, 0xD8 },
{ 0x0310, 0x00 },
+
+ { 0x0114, 0x03 },
+ { 0x0820, 0x13 },
+ { 0x0821, 0x4C },
+ { 0x0822, 0xCC },
+ { 0x0823, 0xCC },
+};
+
+static const struct imx258_reg mipi_1272mbps_24mhz_2l[] = {
+ { 0x0136, 0x18 },
+ { 0x0137, 0x00 },
+ { 0x0301, 0x0a },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x04 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0xD4 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+
+ { 0x0114, 0x01 },
{ 0x0820, 0x13 },
{ 0x0821, 0x4C },
{ 0x0822, 0xCC },
{ 0x0823, 0xCC },
};
-static const struct imx258_reg mipi_data_rate_640mbps[] = {
+static const struct imx258_reg mipi_1272mbps_24mhz_4l[] = {
+ { 0x0136, 0x18 },
+ { 0x0137, 0x00 },
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x04 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0xD4 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+
+ { 0x0114, 0x03 },
+ { 0x0820, 0x13 },
+ { 0x0821, 0xE0 },
+ { 0x0822, 0x00 },
+ { 0x0823, 0x00 },
+};
+
+static const struct imx258_reg mipi_640mbps_19_2mhz_2l[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
{ 0x0301, 0x05 },
{ 0x0303, 0x02 },
{ 0x0305, 0x03 },
@@ -147,18 +245,82 @@ static const struct imx258_reg mipi_data
{ 0x030E, 0x00 },
{ 0x030F, 0xD8 },
{ 0x0310, 0x00 },
- { 0x0820, 0x0A },
+
+ { 0x0114, 0x01 },
+ { 0x0820, 0x05 },
{ 0x0821, 0x00 },
{ 0x0822, 0x00 },
{ 0x0823, 0x00 },
};
-static const struct imx258_reg mode_4208x3118_regs[] = {
+static const struct imx258_reg mipi_640mbps_19_2mhz_4l[] = {
{ 0x0136, 0x13 },
{ 0x0137, 0x33 },
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x03 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0x64 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+
+ { 0x0114, 0x03 },
+ { 0x0820, 0x0A },
+ { 0x0821, 0x00 },
+ { 0x0822, 0x00 },
+ { 0x0823, 0x00 },
+};
+
+static const struct imx258_reg mipi_642mbps_24mhz_2l[] = {
+ { 0x0136, 0x18 },
+ { 0x0137, 0x00 },
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x04 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0x6B },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+
+ { 0x0114, 0x01 },
+ { 0x0820, 0x0A },
+ { 0x0821, 0x00 },
+ { 0x0822, 0x00 },
+ { 0x0823, 0x00 },
+};
+
+static const struct imx258_reg mipi_642mbps_24mhz_4l[] = {
+ { 0x0136, 0x18 },
+ { 0x0137, 0x00 },
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x04 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0x6B },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+
+ { 0x0114, 0x03 },
+ { 0x0820, 0x0A },
+ { 0x0821, 0x00 },
+ { 0x0822, 0x00 },
+ { 0x0823, 0x00 },
+};
+
+static const struct imx258_reg mode_4208x3120_regs[] = {
{ 0x3051, 0x00 },
- { 0x3052, 0x00 },
- { 0x4E21, 0x14 },
{ 0x6B11, 0xCF },
{ 0x7FF0, 0x08 },
{ 0x7FF1, 0x0F },
@@ -181,7 +343,6 @@ static const struct imx258_reg mode_4208
{ 0x7FA8, 0x03 },
{ 0x7FA9, 0xFE },
{ 0x7B24, 0x81 },
- { 0x7B25, 0x00 },
{ 0x6564, 0x07 },
{ 0x6B0D, 0x41 },
{ 0x653D, 0x04 },
@@ -203,11 +364,8 @@ static const struct imx258_reg mode_4208
{ 0x5F05, 0xED },
{ 0x0112, 0x0A },
{ 0x0113, 0x0A },
- { 0x0114, 0x03 },
{ 0x0342, 0x14 },
{ 0x0343, 0xE8 },
- { 0x0340, 0x0C },
- { 0x0341, 0x50 },
{ 0x0344, 0x00 },
{ 0x0345, 0x00 },
{ 0x0346, 0x00 },
@@ -215,7 +373,7 @@ static const struct imx258_reg mode_4208
{ 0x0348, 0x10 },
{ 0x0349, 0x6F },
{ 0x034A, 0x0C },
- { 0x034B, 0x2E },
+ { 0x034B, 0x2F },
{ 0x0381, 0x01 },
{ 0x0383, 0x01 },
{ 0x0385, 0x01 },
@@ -241,9 +399,7 @@ static const struct imx258_reg mode_4208
{ 0x034D, 0x70 },
{ 0x034E, 0x0C },
{ 0x034F, 0x30 },
- { 0x0350, 0x01 },
- { 0x0202, 0x0C },
- { 0x0203, 0x46 },
+ { 0x0350, 0x00 },
{ 0x0204, 0x00 },
{ 0x0205, 0x00 },
{ 0x020E, 0x01 },
@@ -273,11 +429,7 @@ static const struct imx258_reg mode_4208
};
static const struct imx258_reg mode_2104_1560_regs[] = {
- { 0x0136, 0x13 },
- { 0x0137, 0x33 },
{ 0x3051, 0x00 },
- { 0x3052, 0x00 },
- { 0x4E21, 0x14 },
{ 0x6B11, 0xCF },
{ 0x7FF0, 0x08 },
{ 0x7FF1, 0x0F },
@@ -300,7 +452,6 @@ static const struct imx258_reg mode_2104
{ 0x7FA8, 0x03 },
{ 0x7FA9, 0xFE },
{ 0x7B24, 0x81 },
- { 0x7B25, 0x00 },
{ 0x6564, 0x07 },
{ 0x6B0D, 0x41 },
{ 0x653D, 0x04 },
@@ -322,11 +473,8 @@ static const struct imx258_reg mode_2104
{ 0x5F05, 0xED },
{ 0x0112, 0x0A },
{ 0x0113, 0x0A },
- { 0x0114, 0x03 },
{ 0x0342, 0x14 },
{ 0x0343, 0xE8 },
- { 0x0340, 0x06 },
- { 0x0341, 0x38 },
{ 0x0344, 0x00 },
{ 0x0345, 0x00 },
{ 0x0346, 0x00 },
@@ -334,7 +482,7 @@ static const struct imx258_reg mode_2104
{ 0x0348, 0x10 },
{ 0x0349, 0x6F },
{ 0x034A, 0x0C },
- { 0x034B, 0x2E },
+ { 0x034B, 0x2F },
{ 0x0381, 0x01 },
{ 0x0383, 0x01 },
{ 0x0385, 0x01 },
@@ -345,11 +493,11 @@ static const struct imx258_reg mode_2104
{ 0x0404, 0x00 },
{ 0x0405, 0x20 },
{ 0x0408, 0x00 },
- { 0x0409, 0x02 },
+ { 0x0409, 0x00 },
{ 0x040A, 0x00 },
{ 0x040B, 0x00 },
{ 0x040C, 0x10 },
- { 0x040D, 0x6A },
+ { 0x040D, 0x70 },
{ 0x040E, 0x06 },
{ 0x040F, 0x18 },
{ 0x3038, 0x00 },
@@ -360,9 +508,7 @@ static const struct imx258_reg mode_2104
{ 0x034D, 0x38 },
{ 0x034E, 0x06 },
{ 0x034F, 0x18 },
- { 0x0350, 0x01 },
- { 0x0202, 0x06 },
- { 0x0203, 0x2E },
+ { 0x0350, 0x00 },
{ 0x0204, 0x00 },
{ 0x0205, 0x00 },
{ 0x020E, 0x01 },
@@ -392,11 +538,7 @@ static const struct imx258_reg mode_2104
};
static const struct imx258_reg mode_1048_780_regs[] = {
- { 0x0136, 0x13 },
- { 0x0137, 0x33 },
{ 0x3051, 0x00 },
- { 0x3052, 0x00 },
- { 0x4E21, 0x14 },
{ 0x6B11, 0xCF },
{ 0x7FF0, 0x08 },
{ 0x7FF1, 0x0F },
@@ -419,7 +561,6 @@ static const struct imx258_reg mode_1048
{ 0x7FA8, 0x03 },
{ 0x7FA9, 0xFE },
{ 0x7B24, 0x81 },
- { 0x7B25, 0x00 },
{ 0x6564, 0x07 },
{ 0x6B0D, 0x41 },
{ 0x653D, 0x04 },
@@ -441,11 +582,8 @@ static const struct imx258_reg mode_1048
{ 0x5F05, 0xED },
{ 0x0112, 0x0A },
{ 0x0113, 0x0A },
- { 0x0114, 0x03 },
{ 0x0342, 0x14 },
{ 0x0343, 0xE8 },
- { 0x0340, 0x03 },
- { 0x0341, 0x4C },
{ 0x0344, 0x00 },
{ 0x0345, 0x00 },
{ 0x0346, 0x00 },
@@ -453,7 +591,7 @@ static const struct imx258_reg mode_1048
{ 0x0348, 0x10 },
{ 0x0349, 0x6F },
{ 0x034A, 0x0C },
- { 0x034B, 0x2E },
+ { 0x034B, 0x2F },
{ 0x0381, 0x01 },
{ 0x0383, 0x01 },
{ 0x0385, 0x01 },
@@ -464,11 +602,11 @@ static const struct imx258_reg mode_1048
{ 0x0404, 0x00 },
{ 0x0405, 0x40 },
{ 0x0408, 0x00 },
- { 0x0409, 0x06 },
+ { 0x0409, 0x00 },
{ 0x040A, 0x00 },
{ 0x040B, 0x00 },
{ 0x040C, 0x10 },
- { 0x040D, 0x64 },
+ { 0x040D, 0x70 },
{ 0x040E, 0x03 },
{ 0x040F, 0x0C },
{ 0x3038, 0x00 },
@@ -479,9 +617,7 @@ static const struct imx258_reg mode_1048
{ 0x034D, 0x18 },
{ 0x034E, 0x03 },
{ 0x034F, 0x0C },
- { 0x0350, 0x01 },
- { 0x0202, 0x03 },
- { 0x0203, 0x42 },
+ { 0x0350, 0x00 },
{ 0x0204, 0x00 },
{ 0x0205, 0x00 },
{ 0x020E, 0x01 },
@@ -510,6 +646,49 @@ static const struct imx258_reg mode_1048
{ 0x0220, 0x00 },
};
+struct imx258_variant_cfg {
+ const struct imx258_reg *regs;
+ unsigned int num_regs;
+};
+
+static const struct imx258_reg imx258_cfg_regs[] = {
+ { 0x3052, 0x00 },
+ { 0x4E21, 0x14 },
+ { 0x7B25, 0x00 },
+};
+
+static const struct imx258_variant_cfg imx258_cfg = {
+ .regs = imx258_cfg_regs,
+ .num_regs = ARRAY_SIZE(imx258_cfg_regs),
+};
+
+static const struct imx258_reg imx258_pdaf_cfg_regs[] = {
+ { 0x3052, 0x01 },
+ { 0x4E21, 0x10 },
+ { 0x7B25, 0x01 },
+};
+
+static const struct imx258_variant_cfg imx258_pdaf_cfg = {
+ .regs = imx258_pdaf_cfg_regs,
+ .num_regs = ARRAY_SIZE(imx258_pdaf_cfg_regs),
+};
+
+/*
+ * The supported formats.
+ * This table MUST contain 4 entries per format, to cover the various flip
+ * combinations in the order
+ * - no flip
+ * - h flip
+ * - v flip
+ * - h&v flips
+ */
+static const u32 codes[] = {
+ /* 10-bit modes. */
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SBGGR10_1X10
+};
static const char * const imx258_test_pattern_menu[] = {
"Disabled",
"Solid Colour",
@@ -518,9 +697,15 @@ static const char * const imx258_test_pa
"Pseudorandom Sequence (PN9)",
};
-/* Configurations for supported link frequencies */
-#define IMX258_LINK_FREQ_634MHZ 633600000ULL
-#define IMX258_LINK_FREQ_320MHZ 320000000ULL
+/* regulator supplies */
+static const char * const imx258_supply_name[] = {
+ /* Supplies can be enabled in any order */
+ "vana", /* Analog (2.8V) supply */
+ "vdig", /* Digital Core (1.05V) supply */
+ "vif", /* IF (1.8V) supply */
+};
+
+#define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name)
enum {
IMX258_LINK_FREQ_1267MBPS,
@@ -528,37 +713,103 @@ enum {
};
/*
- * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
- * data rate => double data rate; number of lanes => 4; bits per pixel => 10
+ * Pixel rate does not necessarily relate to link frequency on this sensor as
+ * there is a FIFO between the pixel array pipeline and the MIPI serializer.
+ * The recommendation from Sony is that the pixel array is always run with a
+ * line length of 5352 pixels, which means that there is a large amount of
+ * blanking time for the 1048x780 mode. There is no need to replicate this
+ * blanking on the CSI2 bus, and the configuration of register 0x0301 allows the
+ * divider to be altered.
+ *
+ * The actual factor between link frequency and pixel rate is in the
+ * imx258_link_cfg, so use this to convert between the two.
+ * bits per pixel being 10, and D-PHY being DDR is assumed by this function, so
+ * the value is only the combination of number of lanes and pixel clock divider.
*/
-static u64 link_freq_to_pixel_rate(u64 f)
+static u64 link_freq_to_pixel_rate(u64 f, const struct imx258_link_cfg *link_cfg)
{
- f *= 2 * 4;
+ f *= 2 * link_cfg->lf_to_pix_rate_factor;
do_div(f, 10);
return f;
}
/* Menu items for LINK_FREQ V4L2 control */
-static const s64 link_freq_menu_items[] = {
+/* Configurations for supported link frequencies */
+#define IMX258_LINK_FREQ_634MHZ 633600000ULL
+#define IMX258_LINK_FREQ_320MHZ 320000000ULL
+
+static const s64 link_freq_menu_items_19_2[] = {
IMX258_LINK_FREQ_634MHZ,
IMX258_LINK_FREQ_320MHZ,
};
+/* Configurations for supported link frequencies */
+#define IMX258_LINK_FREQ_636MHZ 636000000ULL
+#define IMX258_LINK_FREQ_321MHZ 321000000ULL
+
+static const s64 link_freq_menu_items_24[] = {
+ IMX258_LINK_FREQ_636MHZ,
+ IMX258_LINK_FREQ_321MHZ,
+};
+
+#define REGS(_list) { .num_of_regs = ARRAY_SIZE(_list), .regs = _list, }
+
/* Link frequency configs */
-static const struct imx258_link_freq_config link_freq_configs[] = {
+static const struct imx258_link_freq_config link_freq_configs_19_2[] = {
[IMX258_LINK_FREQ_1267MBPS] = {
.pixels_per_line = IMX258_PPL_DEFAULT,
- .reg_list = {
- .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps),
- .regs = mipi_data_rate_1267mbps,
+ .link_cfg = {
+ [IMX258_2_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 2 * 2,
+ .reg_list = REGS(mipi_1267mbps_19_2mhz_2l),
+ },
+ [IMX258_4_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 4,
+ .reg_list = REGS(mipi_1267mbps_19_2mhz_4l),
+ },
}
},
[IMX258_LINK_FREQ_640MBPS] = {
.pixels_per_line = IMX258_PPL_DEFAULT,
- .reg_list = {
- .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps),
- .regs = mipi_data_rate_640mbps,
+ .link_cfg = {
+ [IMX258_2_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 2,
+ .reg_list = REGS(mipi_640mbps_19_2mhz_2l),
+ },
+ [IMX258_4_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 4,
+ .reg_list = REGS(mipi_640mbps_19_2mhz_4l),
+ },
+ }
+ },
+};
+
+static const struct imx258_link_freq_config link_freq_configs_24[] = {
+ [IMX258_LINK_FREQ_1267MBPS] = {
+ .pixels_per_line = IMX258_PPL_DEFAULT,
+ .link_cfg = {
+ [IMX258_2_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 2,
+ .reg_list = REGS(mipi_1272mbps_24mhz_2l),
+ },
+ [IMX258_4_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 4,
+ .reg_list = REGS(mipi_1272mbps_24mhz_4l),
+ },
+ }
+ },
+ [IMX258_LINK_FREQ_640MBPS] = {
+ .pixels_per_line = IMX258_PPL_DEFAULT,
+ .link_cfg = {
+ [IMX258_2_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 2 * 2,
+ .reg_list = REGS(mipi_642mbps_24mhz_2l),
+ },
+ [IMX258_4_LANE_MODE] = {
+ .lf_to_pix_rate_factor = 4,
+ .reg_list = REGS(mipi_642mbps_24mhz_4l),
+ },
}
},
};
@@ -567,14 +818,20 @@ static const struct imx258_link_freq_con
static const struct imx258_mode supported_modes[] = {
{
.width = 4208,
- .height = 3118,
+ .height = 3120,
.vts_def = IMX258_VTS_30FPS,
.vts_min = IMX258_VTS_30FPS,
.reg_list = {
- .num_of_regs = ARRAY_SIZE(mode_4208x3118_regs),
- .regs = mode_4208x3118_regs,
+ .num_of_regs = ARRAY_SIZE(mode_4208x3120_regs),
+ .regs = mode_4208x3120_regs,
},
.link_freq_index = IMX258_LINK_FREQ_1267MBPS,
+ .crop = {
+ .left = IMX258_PIXEL_ARRAY_LEFT,
+ .top = IMX258_PIXEL_ARRAY_TOP,
+ .width = 4208,
+ .height = 3120,
+ },
},
{
.width = 2104,
@@ -586,6 +843,12 @@ static const struct imx258_mode supporte
.regs = mode_2104_1560_regs,
},
.link_freq_index = IMX258_LINK_FREQ_640MBPS,
+ .crop = {
+ .left = IMX258_PIXEL_ARRAY_LEFT,
+ .top = IMX258_PIXEL_ARRAY_TOP,
+ .width = 4208,
+ .height = 3120,
+ },
},
{
.width = 1048,
@@ -597,6 +860,12 @@ static const struct imx258_mode supporte
.regs = mode_1048_780_regs,
},
.link_freq_index = IMX258_LINK_FREQ_640MBPS,
+ .crop = {
+ .left = IMX258_PIXEL_ARRAY_LEFT,
+ .top = IMX258_PIXEL_ARRAY_TOP,
+ .width = 4208,
+ .height = 3120,
+ },
},
};
@@ -604,6 +873,8 @@ struct imx258 {
struct v4l2_subdev sd;
struct media_pad pad;
+ const struct imx258_variant_cfg *variant_cfg;
+
struct v4l2_ctrl_handler ctrl_handler;
/* V4L2 Controls */
struct v4l2_ctrl *link_freq;
@@ -611,10 +882,19 @@ struct imx258 {
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *exposure;
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
+ /* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
+ unsigned int long_exp_shift;
/* Current mode */
const struct imx258_mode *cur_mode;
+ const struct imx258_link_freq_config *link_freq_configs;
+ const s64 *link_freq_menu_items;
+ unsigned int lane_mode_idx;
+ unsigned int csi2_flags;
+
/*
* Mutex for serialized access:
* Protect sensor module set pad format and start/stop streaming safely.
@@ -625,6 +905,7 @@ struct imx258 {
bool streaming;
struct clk *clk;
+ struct regulator_bulk_data supplies[IMX258_NUM_SUPPLIES];
};
static inline struct imx258 *to_imx258(struct v4l2_subdev *_sd)
@@ -706,18 +987,39 @@ static int imx258_write_regs(struct imx2
return 0;
}
+/* Get bayer order based on flip setting. */
+static u32 imx258_get_format_code(struct imx258 *imx258)
+{
+ unsigned int i;
+
+ lockdep_assert_held(&imx258->mutex);
+
+ i = (imx258->vflip->val ? 2 : 0) |
+ (imx258->hflip->val ? 1 : 0);
+
+ return codes[i];
+}
/* Open sub-device */
static int imx258_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
+ struct imx258 *imx258 = to_imx258(sd);
struct v4l2_mbus_framefmt *try_fmt =
v4l2_subdev_get_try_format(sd, fh->state, 0);
+ struct v4l2_rect *try_crop;
/* Initialize try_fmt */
try_fmt->width = supported_modes[0].width;
try_fmt->height = supported_modes[0].height;
- try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ try_fmt->code = imx258_get_format_code(imx258);
try_fmt->field = V4L2_FIELD_NONE;
+ /* Initialize try_crop */
+ try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
+ try_crop->left = IMX258_PIXEL_ARRAY_LEFT;
+ try_crop->top = IMX258_PIXEL_ARRAY_TOP;
+ try_crop->width = IMX258_PIXEL_ARRAY_WIDTH;
+ try_crop->height = IMX258_PIXEL_ARRAY_HEIGHT;
+
return 0;
}
@@ -748,6 +1050,39 @@ static int imx258_update_digital_gain(st
return 0;
}
+static void imx258_adjust_exposure_range(struct imx258 *imx258)
+{
+ int exposure_max, exposure_def;
+
+ /* Honour the VBLANK limits when setting exposure. */
+ exposure_max = imx258->cur_mode->height + imx258->vblank->val -
+ IMX258_EXPOSURE_OFFSET;
+ exposure_def = min(exposure_max, imx258->exposure->val);
+ __v4l2_ctrl_modify_range(imx258->exposure, imx258->exposure->minimum,
+ exposure_max, imx258->exposure->step,
+ exposure_def);
+}
+
+static int imx258_set_frame_length(struct imx258 *imx258, unsigned int val)
+{
+ int ret;
+
+ imx258->long_exp_shift = 0;
+
+ while (val > IMX258_VTS_MAX) {
+ imx258->long_exp_shift++;
+ val >>= 1;
+ }
+
+ ret = imx258_write_reg(imx258, IMX258_REG_VTS,
+ IMX258_REG_VALUE_16BIT, val);
+ if (ret)
+ return ret;
+
+ return imx258_write_reg(imx258, IMX258_LONG_EXP_SHIFT_REG,
+ IMX258_REG_VALUE_08BIT, imx258->long_exp_shift);
+}
+
static int imx258_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx258 *imx258 =
@@ -756,6 +1091,13 @@ static int imx258_set_ctrl(struct v4l2_c
int ret = 0;
/*
+ * The VBLANK control may change the limits of usable exposure, so check
+ * and adjust if necessary.
+ */
+ if (ctrl->id == V4L2_CID_VBLANK)
+ imx258_adjust_exposure_range(imx258);
+
+ /*
* Applying V4L2 control value only happens
* when power is up for streaming
*/
@@ -771,7 +1113,7 @@ static int imx258_set_ctrl(struct v4l2_c
case V4L2_CID_EXPOSURE:
ret = imx258_write_reg(imx258, IMX258_REG_EXPOSURE,
IMX258_REG_VALUE_16BIT,
- ctrl->val);
+ ctrl->val >> imx258->long_exp_shift);
break;
case V4L2_CID_DIGITAL_GAIN:
ret = imx258_update_digital_gain(imx258, IMX258_REG_VALUE_16BIT,
@@ -781,10 +1123,6 @@ static int imx258_set_ctrl(struct v4l2_c
ret = imx258_write_reg(imx258, IMX258_REG_TEST_PATTERN,
IMX258_REG_VALUE_16BIT,
ctrl->val);
- ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
- IMX258_REG_VALUE_08BIT,
- !ctrl->val ? REG_CONFIG_MIRROR_FLIP :
- REG_CONFIG_FLIP_TEST_PATTERN);
break;
case V4L2_CID_WIDE_DYNAMIC_RANGE:
if (!ctrl->val) {
@@ -802,6 +1140,19 @@ static int imx258_set_ctrl(struct v4l2_c
BIT(IMX258_HDR_RATIO_MAX));
}
break;
+ case V4L2_CID_VBLANK:
+ ret = imx258_set_frame_length(imx258,
+ imx258->cur_mode->height + ctrl->val);
+ break;
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
+ IMX258_REG_VALUE_08BIT,
+ (imx258->hflip->val ?
+ REG_CONFIG_MIRROR_HFLIP : 0) |
+ (imx258->vflip->val ?
+ REG_CONFIG_MIRROR_VFLIP : 0));
+ break;
default:
dev_info(&client->dev,
"ctrl(id:0x%x,val:0x%x) is not handled\n",
@@ -823,11 +1174,13 @@ static int imx258_enum_mbus_code(struct
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
- /* Only one bayer order(GRBG) is supported */
+ struct imx258 *imx258 = to_imx258(sd);
+
+ /* Only one bayer format (10 bit) is supported */
if (code->index > 0)
return -EINVAL;
- code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ code->code = imx258_get_format_code(imx258);
return 0;
}
@@ -836,10 +1189,11 @@ static int imx258_enum_frame_size(struct
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
+ struct imx258 *imx258 = to_imx258(sd);
if (fse->index >= ARRAY_SIZE(supported_modes))
return -EINVAL;
- if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+ if (fse->code != imx258_get_format_code(imx258))
return -EINVAL;
fse->min_width = supported_modes[fse->index].width;
@@ -850,12 +1204,13 @@ static int imx258_enum_frame_size(struct
return 0;
}
-static void imx258_update_pad_format(const struct imx258_mode *mode,
+static void imx258_update_pad_format(struct imx258 *imx258,
+ const struct imx258_mode *mode,
struct v4l2_subdev_format *fmt)
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
- fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ fmt->format.code = imx258_get_format_code(imx258);
fmt->format.field = V4L2_FIELD_NONE;
}
@@ -868,7 +1223,7 @@ static int __imx258_get_pad_format(struc
sd_state,
fmt->pad);
else
- imx258_update_pad_format(imx258->cur_mode, fmt);
+ imx258_update_pad_format(imx258, imx258->cur_mode, fmt);
return 0;
}
@@ -892,8 +1247,10 @@ static int imx258_set_pad_format(struct
struct v4l2_subdev_format *fmt)
{
struct imx258 *imx258 = to_imx258(sd);
- const struct imx258_mode *mode;
+ const struct imx258_link_freq_config *link_freq_cfgs;
+ const struct imx258_link_cfg *link_cfg;
struct v4l2_mbus_framefmt *framefmt;
+ const struct imx258_mode *mode;
s32 vblank_def;
s32 vblank_min;
s64 h_blank;
@@ -902,13 +1259,12 @@ static int imx258_set_pad_format(struct
mutex_lock(&imx258->mutex);
- /* Only one raw bayer(GBRG) order is supported */
- fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ fmt->format.code = imx258_get_format_code(imx258);
mode = v4l2_find_nearest_size(supported_modes,
ARRAY_SIZE(supported_modes), width, height,
fmt->format.width, fmt->format.height);
- imx258_update_pad_format(mode, fmt);
+ imx258_update_pad_format(imx258, mode, fmt);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
*framefmt = fmt->format;
@@ -916,9 +1272,14 @@ static int imx258_set_pad_format(struct
imx258->cur_mode = mode;
__v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index);
- link_freq = link_freq_menu_items[mode->link_freq_index];
- pixel_rate = link_freq_to_pixel_rate(link_freq);
- __v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate);
+ link_freq = imx258->link_freq_menu_items[mode->link_freq_index];
+ link_freq_cfgs =
+ &imx258->link_freq_configs[mode->link_freq_index];
+
+ link_cfg = &link_freq_cfgs->link_cfg[imx258->lane_mode_idx];
+ pixel_rate = link_freq_to_pixel_rate(link_freq, link_cfg);
+ __v4l2_ctrl_modify_range(imx258->pixel_rate, pixel_rate,
+ pixel_rate, 1, pixel_rate);
/* Update limits and set FPS to default */
vblank_def = imx258->cur_mode->vts_def -
imx258->cur_mode->height;
@@ -926,11 +1287,12 @@ static int imx258_set_pad_format(struct
imx258->cur_mode->height;
__v4l2_ctrl_modify_range(
imx258->vblank, vblank_min,
- IMX258_VTS_MAX - imx258->cur_mode->height, 1,
- vblank_def);
+ ((1 << IMX258_LONG_EXP_SHIFT_MAX) * IMX258_VTS_MAX) -
+ imx258->cur_mode->height,
+ 1, vblank_def);
__v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def);
h_blank =
- link_freq_configs[mode->link_freq_index].pixels_per_line
+ imx258->link_freq_configs[mode->link_freq_index].pixels_per_line
- imx258->cur_mode->width;
__v4l2_ctrl_modify_range(imx258->hblank, h_blank,
h_blank, 1, h_blank);
@@ -941,36 +1303,107 @@ static int imx258_set_pad_format(struct
return 0;
}
+static const struct v4l2_rect *
+__imx258_get_pad_crop(struct imx258 *imx258,
+ struct v4l2_subdev_state *sd_state,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&imx258->sd, sd_state, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx258->cur_mode->crop;
+ }
+
+ return NULL;
+}
+
+static int imx258_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_selection *sel)
+{
+ switch (sel->target) {
+ case V4L2_SEL_TGT_CROP: {
+ struct imx258 *imx258 = to_imx258(sd);
+
+ mutex_lock(&imx258->mutex);
+ sel->r = *__imx258_get_pad_crop(imx258, sd_state, sel->pad,
+ sel->which);
+ mutex_unlock(&imx258->mutex);
+
+ return 0;
+ }
+
+ case V4L2_SEL_TGT_NATIVE_SIZE:
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = IMX258_NATIVE_WIDTH;
+ sel->r.height = IMX258_NATIVE_HEIGHT;
+
+ return 0;
+
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ sel->r.left = IMX258_PIXEL_ARRAY_LEFT;
+ sel->r.top = IMX258_PIXEL_ARRAY_TOP;
+ sel->r.width = IMX258_PIXEL_ARRAY_WIDTH;
+ sel->r.height = IMX258_PIXEL_ARRAY_HEIGHT;
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
/* Start streaming */
static int imx258_start_streaming(struct imx258 *imx258)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
const struct imx258_reg_list *reg_list;
+ const struct imx258_link_freq_config *link_freq_cfg;
int ret, link_freq_index;
+ ret = imx258_write_reg(imx258, IMX258_REG_RESET, IMX258_REG_VALUE_08BIT,
+ 0x01);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to reset sensor\n", __func__);
+ return ret;
+ }
+ usleep_range(10000, 15000);
+
/* Setup PLL */
link_freq_index = imx258->cur_mode->link_freq_index;
- reg_list = &link_freq_configs[link_freq_index].reg_list;
+ link_freq_cfg = &imx258->link_freq_configs[link_freq_index];
+
+ reg_list = &link_freq_cfg->link_cfg[imx258->lane_mode_idx].reg_list;
ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
if (ret) {
dev_err(&client->dev, "%s failed to set plls\n", __func__);
return ret;
}
- /* Apply default values of current mode */
- reg_list = &imx258->cur_mode->reg_list;
- ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
+ ret = imx258_write_regs(imx258, imx258->variant_cfg->regs,
+ imx258->variant_cfg->num_regs);
if (ret) {
- dev_err(&client->dev, "%s failed to set mode\n", __func__);
+ dev_err(&client->dev, "%s failed to set variant config\n",
+ __func__);
return ret;
}
- /* Set Orientation be 180 degree */
- ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
- IMX258_REG_VALUE_08BIT, REG_CONFIG_MIRROR_FLIP);
+ ret = imx258_write_reg(imx258, IMX258_CLK_BLANK_STOP,
+ IMX258_REG_VALUE_08BIT,
+ imx258->csi2_flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK ?
+ 1 : 0);
if (ret) {
- dev_err(&client->dev, "%s failed to set orientation\n",
- __func__);
+ dev_err(&client->dev, "%s failed to set clock lane mode\n", __func__);
+ return ret;
+ }
+
+ /* Apply default values of current mode */
+ reg_list = &imx258->cur_mode->reg_list;
+ ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set mode\n", __func__);
return ret;
}
@@ -1010,9 +1443,19 @@ static int imx258_power_on(struct device
struct imx258 *imx258 = to_imx258(sd);
int ret;
+ ret = regulator_bulk_enable(IMX258_NUM_SUPPLIES,
+ imx258->supplies);
+ if (ret) {
+ dev_err(dev, "%s: failed to enable regulators\n",
+ __func__);
+ return ret;
+ }
+
ret = clk_prepare_enable(imx258->clk);
- if (ret)
+ if (ret) {
dev_err(dev, "failed to enable clock\n");
+ regulator_bulk_disable(IMX258_NUM_SUPPLIES, imx258->supplies);
+ }
return ret;
}
@@ -1023,6 +1466,7 @@ static int imx258_power_off(struct devic
struct imx258 *imx258 = to_imx258(sd);
clk_disable_unprepare(imx258->clk);
+ regulator_bulk_disable(IMX258_NUM_SUPPLIES, imx258->supplies);
return 0;
}
@@ -1133,6 +1577,7 @@ static const struct v4l2_subdev_pad_ops
.get_fmt = imx258_get_pad_format,
.set_fmt = imx258_set_pad_format,
.enum_frame_size = imx258_enum_frame_size,
+ .get_selection = imx258_get_selection,
};
static const struct v4l2_subdev_ops imx258_subdev_ops = {
@@ -1148,15 +1593,17 @@ static const struct v4l2_subdev_internal
static int imx258_init_controls(struct imx258 *imx258)
{
struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
+ const struct imx258_link_freq_config *link_freq_cfgs;
+ struct v4l2_fwnode_device_properties props;
struct v4l2_ctrl_handler *ctrl_hdlr;
+ const struct imx258_link_cfg *link_cfg;
s64 vblank_def;
s64 vblank_min;
- s64 pixel_rate_min;
- s64 pixel_rate_max;
+ s64 pixel_rate;
int ret;
ctrl_hdlr = &imx258->ctrl_handler;
- ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 12);
if (ret)
return ret;
@@ -1165,20 +1612,23 @@ static int imx258_init_controls(struct i
imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
&imx258_ctrl_ops,
V4L2_CID_LINK_FREQ,
- ARRAY_SIZE(link_freq_menu_items) - 1,
+ ARRAY_SIZE(link_freq_menu_items_19_2) - 1,
0,
- link_freq_menu_items);
+ imx258->link_freq_menu_items);
if (imx258->link_freq)
imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
- pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]);
+ link_freq_cfgs = &imx258->link_freq_configs[0];
+ link_cfg = link_freq_cfgs[imx258->lane_mode_idx].link_cfg;
+ pixel_rate = link_freq_to_pixel_rate(imx258->link_freq_menu_items[0],
+ link_cfg);
+
/* By default, PIXEL_RATE is read only */
imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
V4L2_CID_PIXEL_RATE,
- pixel_rate_min, pixel_rate_max,
- 1, pixel_rate_max);
+ pixel_rate, pixel_rate,
+ 1, pixel_rate);
vblank_def = imx258->cur_mode->vts_def - imx258->cur_mode->height;
@@ -1189,9 +1639,6 @@ static int imx258_init_controls(struct i
IMX258_VTS_MAX - imx258->cur_mode->height, 1,
vblank_def);
- if (imx258->vblank)
- imx258->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-
imx258->hblank = v4l2_ctrl_new_std(
ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_HBLANK,
IMX258_PPL_DEFAULT - imx258->cur_mode->width,
@@ -1225,6 +1672,25 @@ static int imx258_init_controls(struct i
ARRAY_SIZE(imx258_test_pattern_menu) - 1,
0, 0, imx258_test_pattern_menu);
+ ret = v4l2_fwnode_device_parse(&client->dev, &props);
+ if (ret)
+ goto error;
+ ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx258_ctrl_ops,
+ &props);
+ if (ret)
+ goto error;
+
+ imx258->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1,
+ props.rotation == 180 ? 1 : 0);
+ if (imx258->hflip)
+ imx258->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
+
+ imx258->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1,
+ props.rotation == 180 ? 1 : 0);
+ if (imx258->vflip)
+ imx258->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
if (ctrl_hdlr->error) {
ret = ctrl_hdlr->error;
dev_err(&client->dev, "%s control init failed (%d)\n",
@@ -1249,9 +1715,33 @@ static void imx258_free_controls(struct
mutex_destroy(&imx258->mutex);
}
+static int imx258_get_regulators(struct imx258 *imx258,
+ struct i2c_client *client)
+{
+ unsigned int i;
+
+ for (i = 0; i < IMX258_NUM_SUPPLIES; i++)
+ imx258->supplies[i].supply = imx258_supply_name[i];
+
+ return devm_regulator_bulk_get(&client->dev,
+ IMX258_NUM_SUPPLIES,
+ imx258->supplies);
+}
+
+static const struct of_device_id imx258_dt_ids[] = {
+ { .compatible = "sony,imx258", .data = &imx258_cfg },
+ { .compatible = "sony,imx258-pdaf", .data = &imx258_pdaf_cfg },
+ { /* sentinel */ }
+};
+
static int imx258_probe(struct i2c_client *client)
{
struct imx258 *imx258;
+ struct fwnode_handle *endpoint;
+ struct v4l2_fwnode_endpoint ep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY
+ };
+ const struct of_device_id *match;
int ret;
u32 val = 0;
@@ -1259,6 +1749,10 @@ static int imx258_probe(struct i2c_clien
if (!imx258)
return -ENOMEM;
+ ret = imx258_get_regulators(imx258, client);
+ if (ret)
+ return ret;
+
imx258->clk = devm_clk_get_optional(&client->dev, NULL);
if (IS_ERR(imx258->clk))
return dev_err_probe(&client->dev, PTR_ERR(imx258->clk),
@@ -1268,21 +1762,67 @@ static int imx258_probe(struct i2c_clien
"no clock provided, using clock-frequency property\n");
device_property_read_u32(&client->dev, "clock-frequency", &val);
+ } else if (IS_ERR(imx258->clk)) {
+ return dev_err_probe(&client->dev, PTR_ERR(imx258->clk),
+ "error getting clock\n");
} else {
val = clk_get_rate(imx258->clk);
}
- if (val != IMX258_INPUT_CLOCK_FREQ) {
- dev_err(&client->dev, "input clock frequency not supported\n");
+
+ switch (val) {
+ case 19200000:
+ imx258->link_freq_configs = link_freq_configs_19_2;
+ imx258->link_freq_menu_items = link_freq_menu_items_19_2;
+ break;
+ case 24000000:
+ imx258->link_freq_configs = link_freq_configs_24;
+ imx258->link_freq_menu_items = link_freq_menu_items_24;
+ break;
+ default:
+ dev_err(&client->dev, "input clock frequency of %u not supported\n",
+ val);
return -EINVAL;
}
- /*
- * Check that the device is mounted upside down. The driver only
- * supports a single pixel order right now.
- */
- ret = device_property_read_u32(&client->dev, "rotation", &val);
- if (ret || val != 180)
+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
+ if (!endpoint) {
+ dev_err(&client->dev, "Endpoint node not found\n");
return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep);
+ fwnode_handle_put(endpoint);
+ if (ret == -ENXIO) {
+ dev_err(&client->dev, "Unsupported bus type, should be CSI2\n");
+ goto error_endpoint_poweron;
+ } else if (ret) {
+ dev_err(&client->dev, "Parsing endpoint node failed\n");
+ goto error_endpoint_poweron;
+ }
+
+ /* Get number of data lanes */
+ switch (ep.bus.mipi_csi2.num_data_lanes) {
+ case 2:
+ imx258->lane_mode_idx = IMX258_2_LANE_MODE;
+ break;
+ case 4:
+ imx258->lane_mode_idx = IMX258_4_LANE_MODE;
+ break;
+ default:
+ dev_err(&client->dev, "Invalid data lanes: %u\n",
+ ep.bus.mipi_csi2.num_data_lanes);
+ ret = -EINVAL;
+ goto error_endpoint_poweron;
+ }
+
+ imx258->csi2_flags = ep.bus.mipi_csi2.flags;
+
+ match = i2c_of_match_device(imx258_dt_ids, client);
+ if (!match || !match->data)
+ imx258->variant_cfg = &imx258_cfg;
+ else
+ imx258->variant_cfg =
+ (const struct imx258_variant_cfg *)match->data;
/* Initialize subdev */
v4l2_i2c_subdev_init(&imx258->sd, client, &imx258_subdev_ops);
@@ -1290,7 +1830,7 @@ static int imx258_probe(struct i2c_clien
/* Will be powered off via pm_runtime_idle */
ret = imx258_power_on(&client->dev);
if (ret)
- return ret;
+ goto error_endpoint_poweron;
/* Check module identity */
ret = imx258_identify_module(imx258);
@@ -1335,6 +1875,9 @@ error_handler_free:
error_identify:
imx258_power_off(&client->dev);
+error_endpoint_poweron:
+ v4l2_fwnode_endpoint_free(&ep);
+
return ret;
}
@@ -1367,10 +1910,6 @@ static const struct acpi_device_id imx25
MODULE_DEVICE_TABLE(acpi, imx258_acpi_ids);
#endif
-static const struct of_device_id imx258_dt_ids[] = {
- { .compatible = "sony,imx258" },
- { /* sentinel */ }
-};
MODULE_DEVICE_TABLE(of, imx258_dt_ids);
static struct i2c_driver imx258_i2c_driver = {
Reference in New Issue View Git Blame Copy Permalink