openwrt/target/linux/ath79/dts/ar9344_netgear_wndr4300.dts
Adrian Schmutzler f4026ad24d ath79: DTS file style update and harmonization
This applies several style adjustments that have been requested in
recent reviews to older DTS files. Despite making the code base more
consistent, this will also help to reduce review time when DTSes
are copy/pasted.

Applied changes:
- Rename gpio-keys/gpio-leds to keys/leds
- Remove node labels that are not used
- Use label property for partitions
- Prefix led node labels with "led_"
- Remove redundant includes
- Harmonize new lines after status property
- Several smaller style fixes

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-11-06 00:27:55 +01:00

294 lines
4.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "netgear,wndr4300", "qca,ar9344";
model = "Netgear WNDR4300";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power_amber;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio_11>;
led_power_green: power_green {
label = "netgear:green:power";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
label = "netgear:amber:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wan_amber {
label = "netgear:amber:wan";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
wlan2g_green {
label = "netgear:green:wlan2g";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g_blue {
label = "netgear:blue:wlan5g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wps_amber {
label = "netgear:amber:wps";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
usb_green {
label = "netgear:green:usb";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
};
&pinmux {
enable_gpio_11: pinmux_enable_gpio_11 {
pinctrl-single,bits = <0x8 0x0 0xff000000>;
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x40000>;
};
art: partition@80000 {
label = "caldata";
reg = <0x80000 0x40000>;
read-only;
};
partition@c0000 {
label = "pot";
reg = <0xc0000 0x80000>;
};
partition@140000 {
label = "language";
reg = <0x140000 0x200000>;
};
partition@340000 {
label = "config";
reg = <0x340000 0x80000>;
};
partition@3c0000 {
label = "traffic_meter";
reg = <0x3c0000 0x300000>;
};
kernel@6c0000 {
label = "kernel";
reg = <0x6c0000 0x200000>;
};
ubi@8c0000 {
label = "ubi";
reg = <0x8c0000 0x1700000>;
};
partition@6c0000 {
label = "firmware";
reg = <0x6c0000 0x1900000>;
compatible = "netgear,uimage";
};
partition@1fc0000 {
label = "caldata_backup";
reg = <0x1fc0000 0x40000>;
read-only;
};
partition@2000000 {
label = "reserved";
reg = <0x2000000 0x6000000>;
read-only;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&builtin_switch {
resets = <&rst 8>, <&rst 12>;
reset-names = "switch", "switch-analog";
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x07600000
0x0c 0x01000000
0x10 0xc1000000
0x50 0xcc35cc35
0x54 0xcb37cb37
0x58 0x00000000
0x5c 0x00f3cf00
0x7c 0x0000007e
0x94 0x0000007e
>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&gpio {
status = "okay";
lna0 {
gpio-hog;
line-name = "netgear:ext:lna0";
gpios = <18 GPIO_ACTIVE_HIGH>;
output-high;
};
lna1 {
gpio-hog;
line-name = "netgear:ext:lna1";
gpios = <19 GPIO_ACTIVE_HIGH>;
output-high;
};
};
&wmac {
status = "okay";
mtd-mac-address = <&art 0x0>;
qca,no-eeprom;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0xc>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
usb_power {
gpio-hog;
line-name = "netgear:power:usb";
gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
};
};
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&uart {
status = "okay";
};