mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
a0e0e621ca
The PCI device ID detected by the wifi drivers on devices using a fallback
SPROM is wrong. Currently the chipnum is used for this parameter.
Most SSB based Broadcom wifi chips are 2.4 and 5GHz capable. But on
devices without a physical SPROM, the only one way to detect if the device
suports both bands or only the 5GHz band, is by reading the device ID from
the fallback SPROM.
In some devices, this may lead to a non working wifi on a 5GHz-only card,
or in the best case a working 2.4GHz-only in a dual band wifi card.
The offset for the deviceid in SSB SPROMs is 0x0008, whereas in BCMA is
0x0060. This is true for any SPROM version.
Override the PCI device ID with the one defined at the fallback SPROM, to
detect the correct wifi card model and allow using the 5GHz band if
supported.
The patch has been tested with the following wifi radios:
BCM43222: b43: both 2.4/5GHz working
brcm-wl: both 2.4/5GHz working
BCM43225: b43: 2.4GHz, working
brcmsmac: working
brcm-wl: it lacks support
BCM43217: b43: 2.4GHz, working
brcmsmac: it lacks support
brcm-wl: it lacks support
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
[amend commit description, rework patch to avoid using a new global variable
and keep ssb sprom extraction code as close to ssb/pci.c as possible]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
79 lines
2.2 KiB
Diff
79 lines
2.2 KiB
Diff
--- a/arch/mips/bcm63xx/sprom.c
|
|
+++ b/arch/mips/bcm63xx/sprom.c
|
|
@@ -384,6 +384,7 @@ static __initconst u16 bcm4331_sprom[] =
|
|
struct fallback_sprom_match {
|
|
u8 pci_bus;
|
|
u8 pci_dev;
|
|
+ int override_devid;
|
|
struct ssb_sprom sprom;
|
|
};
|
|
|
|
@@ -399,6 +400,8 @@ int bcm63xx_get_fallback_ssb_sprom(struc
|
|
fallback_sprom.pci_bus, fallback_sprom.pci_dev,
|
|
bus->host_pci->bus->number,
|
|
PCI_SLOT(bus->host_pci->devfn));
|
|
+ if (fallback_sprom.override_devid)
|
|
+ bus->host_pci->device = fallback_sprom.sprom.dev_id;
|
|
memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
|
|
return 0;
|
|
} else {
|
|
@@ -418,6 +421,8 @@ int bcm63xx_get_fallback_bcma_sprom(stru
|
|
fallback_sprom.pci_bus, fallback_sprom.pci_dev,
|
|
bus->host_pci->bus->number,
|
|
PCI_SLOT(bus->host_pci->devfn));
|
|
+ if (fallback_sprom.override_devid)
|
|
+ bus->host_pci->device = fallback_sprom.sprom.dev_id;
|
|
memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom));
|
|
return 0;
|
|
} else {
|
|
@@ -965,6 +970,37 @@ static int sprom_extract(struct ssb_spro
|
|
return 0;
|
|
}
|
|
|
|
+int sprom_override_devid(struct fallback_sprom_data *data,
|
|
+ struct ssb_sprom *out, const u16 *in)
|
|
+{
|
|
+ switch (data->type) {
|
|
+#if defined(CONFIG_SSB_PCIHOST)
|
|
+ case SPROM_BCM4306:
|
|
+ case SPROM_BCM4318:
|
|
+ case SPROM_BCM4321:
|
|
+ case SPROM_BCM4322:
|
|
+ case SPROM_BCM43222:
|
|
+ SPEX(dev_id, SSB_SPROM1_PID, 0xFFFF, 0);
|
|
+ return !!out->dev_id;
|
|
+#endif /* CONFIG_SSB_PCIHOST */
|
|
+#if defined(CONFIG_BCMA_HOST_PCI)
|
|
+ case SPROM_BCM4313:
|
|
+ case SPROM_BCM43131:
|
|
+ case SPROM_BCM43217:
|
|
+ case SPROM_BCM43225:
|
|
+ case SPROM_BCM43227:
|
|
+ case SPROM_BCM43228:
|
|
+ case SPROM_BCM4331:
|
|
+ SPEX(dev_id, 0x0060, 0xFFFF, 0);
|
|
+ return !!out->dev_id;
|
|
+#endif /* CONFIG_BCMA_HOST_PCI */
|
|
+ case SPROM_DEFAULT:
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n)
|
|
{
|
|
unsigned int i;
|
|
@@ -1056,6 +1092,11 @@ int __init bcm63xx_register_fallback_spr
|
|
data->num_board_fixups);
|
|
|
|
sprom_extract(&fallback_sprom.sprom, template_sprom, size);
|
|
+
|
|
+ fallback_sprom.override_devid =
|
|
+ sprom_override_devid(data, &fallback_sprom.sprom, template_sprom);
|
|
+ } else {
|
|
+ fallback_sprom.override_devid = 0;
|
|
}
|
|
|
|
memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN);
|