openwrt/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.c
John Crispin 736835343c move files/ -> files-3.3/
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00

1147 lines
36 KiB
C

#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <asm/paccess.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
#define CONFIG_IFX_PCIE_1ST_CORE
#include "pcie-lantiq.h"
#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25)
#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8)
#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9)
#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10)
#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11)
#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
#define SM(_v, _f) (((_v) << _f##_S) & (_f))
#define IFX_REG_SET_BIT(_f, _r) \
IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000
#define IFX_PCIE_PHY_LOOP_CNT 5
static DEFINE_SPINLOCK(ifx_pcie_lock);
int pcibios_1st_host_bus_nr(void);
unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
{
.ir_irq = {
.irq = IFX_PCIE_IR,
.name = "ifx_pcie_rc0",
},
.legacy_irq = {
{
.irq_bit = PCIE_IRN_INTA,
.irq = IFX_PCIE_INTA,
},
{
.irq_bit = PCIE_IRN_INTB,
.irq = IFX_PCIE_INTB,
},
{
.irq_bit = PCIE_IRN_INTC,
.irq = IFX_PCIE_INTC,
},
{
.irq_bit = PCIE_IRN_INTD,
.irq = IFX_PCIE_INTD,
},
},
},
};
static inline int pcie_ltssm_enable(int pcie_port)
{
int i;
IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
/* Wait for the link to come up */
for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
break;
}
udelay(10);
}
if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
return -1;
}
return 0;
}
static inline void pcie_status_register_clear(int pcie_port)
{
IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
IFX_REG_W32(0, PCIE_RSTS(pcie_port));
IFX_REG_W32(0, PCIE_UES_R(pcie_port));
IFX_REG_W32(0, PCIE_UEMR(pcie_port));
IFX_REG_W32(0, PCIE_UESR(pcie_port));
IFX_REG_W32(0, PCIE_CESR(pcie_port));
IFX_REG_W32(0, PCIE_CEMR(pcie_port));
IFX_REG_W32(0, PCIE_RESR(pcie_port));
IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
IFX_REG_W32(0, PCIE_QSR(pcie_port));
IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
}
static inline int ifx_pcie_link_up(int pcie_port)
{
return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
}
static inline void pcie_mem_io_setup(int pcie_port)
{
unsigned int reg;
/*
* BAR[0:1] readonly register
* RC contains only minimal BARs for packets mapped to this device
* Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
* reside on the downstream side fo the bridge.
*/
reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
| SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
IFX_REG_W32(reg, PCIE_MBML(pcie_port));
/* PCIe_PBML, same as MBML */
IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
/* IO Address Range */
reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
| SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
| SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
}
static inline void pcie_msi_setup(int pcie_port)
{
unsigned int reg;
/* XXX, MSI stuff should only apply to EP */
/* MSI Capability: Only enable 32-bit addresses */
reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
reg &= ~PCIE_MCAPR_ADDR64_CAP;
reg |= PCIE_MCAPR_MSI_ENABLE;
/* Disable multiple message */
reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
}
static inline void pcie_pm_setup(int pcie_port)
{
unsigned int reg;
/* Enable PME, Soft reset enabled */
reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
}
static inline void pcie_bus_setup(int pcie_port)
{
unsigned int reg;
reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
IFX_REG_W32(reg, PCIE_BNR(pcie_port));
}
static inline void pcie_device_setup(int pcie_port)
{
unsigned int reg;
/* Device capability register, set up Maximum payload size */
reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
/* Only available for EP */
reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
/* Device control and status register */
/* Set Maximum Read Request size for the device as a Requestor */
reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
/*
* Request size can be larger than the MPS used, but the completions returned
* for the read will be bounded by the MPS size.
* In our system, Max request size depends on AHB burst size. It is 64 bytes.
* but we set it as 128 as minimum one.
*/
reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
| SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
/* Enable relaxed ordering, no snoop, and all kinds of errors */
reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
}
static inline void pcie_link_setup(int pcie_port)
{
unsigned int reg;
/*
* XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM
* L0s is reported during link training via TS1 order set by N_FTS
*/
reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
/* Link control and status register */
reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
/* Link Enable, ASPM enabled */
reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
#ifdef CONFIG_PCIEASPM
/*
* We use the same physical reference clock that the platform provides on the connector
* It paved the way for ASPM to calculate the new exit Latency
*/
reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
reg |= PCIE_LCTLSTS_COM_CLK_CFG;
/*
* We should disable ASPM by default except that we have dedicated power management support
* Enable ASPM will cause the system hangup/instability, performance degration
*/
reg |= PCIE_LCTLSTS_ASPM_ENABLE;
#else
reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
#endif /* CONFIG_PCIEASPM */
/*
* The maximum size of any completion with data packet is bounded by the MPS setting
* in device control register
*/
/* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
reg &= ~ PCIE_LCTLSTS_RCB128;
IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
}
static inline void pcie_error_setup(int pcie_port)
{
unsigned int reg;
/*
* Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone
* Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE
*/
reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
/* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
/* Uncorrectable Error Severity Register, ALL errors are FATAL */
IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
/* Correctable Error Mask Register, unmask <enable> all bits */
reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
reg &= ~PCIE_CORRECTABLE_ERR;
IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
/* Advanced Error Capabilities and Control Registr */
reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
/* Root Error Command Register, Report all types of errors */
reg = IFX_REG_R32(PCIE_RECR(pcie_port));
reg |= PCIE_RECR_ERR_REPORT_EN;
IFX_REG_W32(reg, PCIE_RECR(pcie_port));
/* Clear the Root status register */
reg = IFX_REG_R32(PCIE_RESR(pcie_port));
IFX_REG_W32(reg, PCIE_RESR(pcie_port));
}
static inline void pcie_root_setup(int pcie_port)
{
unsigned int reg;
/* Root control and capabilities register */
reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
}
static inline void pcie_vc_setup(int pcie_port)
{
unsigned int reg;
/* Port VC Capability Register 2 */
reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
reg &= ~PCIE_PVC2_VC_ARB_WRR;
reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
/* VC0 Resource Capability Register */
reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
}
static inline void pcie_port_logic_setup(int pcie_port)
{
unsigned int reg;
/* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */
reg = IFX_REG_R32(PCIE_AFR(pcie_port));
reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
| SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
/* L0s and L1 entry latency */
reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
| SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
IFX_REG_W32(reg, PCIE_AFR(pcie_port));
/* Port Link Control Register */
reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */
IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
/* Lane Skew Register */
reg = IFX_REG_R32(PCIE_LSR(pcie_port));
/* Enable ACK/NACK and FC */
reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
IFX_REG_W32(reg, PCIE_LSR(pcie_port));
/* Symbol Timer Register and Filter Mask Register 1 */
reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
/* Default SKP interval is very accurate already, 5us */
/* Enable IO/CFG transaction */
reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
/* Disable FC WDT */
reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
/* Filter Masker Register 2 */
reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
/* VC0 Completion Receive Queue Control Register */
reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
}
static inline void pcie_rc_cfg_reg_setup(int pcie_port)
{
/* diable ltssm */
IFX_REG_W32(0, PCIE_RC_CCR(pcie_port));
pcie_mem_io_setup(pcie_port);
pcie_msi_setup(pcie_port);
pcie_pm_setup(pcie_port);
pcie_bus_setup(pcie_port);
pcie_device_setup(pcie_port);
pcie_link_setup(pcie_port);
pcie_error_setup(pcie_port);
pcie_root_setup(pcie_port);
pcie_vc_setup(pcie_port);
pcie_port_logic_setup(pcie_port);
}
static int ifx_pcie_wait_phy_link_up(int pcie_port)
{
int i;
/* Wait for PHY link is up */
for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
if (ifx_pcie_link_up(pcie_port)) {
break;
}
udelay(100);
}
if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
printk(KERN_ERR "%s timeout\n", __func__);
return -1;
}
/* Check data link up or not */
if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
printk(KERN_ERR "%s DLL link is still down\n", __func__);
return -1;
}
/* Check Data link active or not */
if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
printk(KERN_ERR "%s DLL is not active\n", __func__);
return -1;
}
return 0;
}
static inline int pcie_app_loigc_setup(int pcie_port)
{
IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
/* Pull PCIe EP out of reset */
pcie_device_rst_deassert(pcie_port);
/* Start LTSSM training between RC and EP */
pcie_ltssm_enable(pcie_port);
/* Check PHY status after enabling LTSSM */
if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
return -1;
}
return 0;
}
/*
* Must be done after ltssm due to based on negotiated link
* width and payload size
* Update the Replay Time Limit. Empirically, some PCIe
* devices take a little longer to respond than expected under
* load. As a workaround for this we configure the Replay Time
* Limit to the value expected for a 512 byte MPS instead of
* our actual 128 byte MPS. The numbers below are directly
* from the PCIe spec table 3-4/5.
*/
static inline void pcie_replay_time_update(int pcie_port)
{
unsigned int reg;
int nlw;
int rtl;
reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
switch (nlw) {
case PCIE_MAX_LENGTH_WIDTH_X1:
rtl = 1677;
break;
case PCIE_MAX_LENGTH_WIDTH_X2:
rtl = 867;
break;
case PCIE_MAX_LENGTH_WIDTH_X4:
rtl = 462;
break;
case PCIE_MAX_LENGTH_WIDTH_X8:
rtl = 258;
break;
default:
rtl = 1677;
break;
}
reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
__func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
}
/*
* Table 359 Enhanced Configuration Address Mapping1)
* 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
* Memory Address PCI Express Configuration Space
* A[(20+n-1):20] Bus Number 1 < n < 8
* A[19:15] Device Number
* A[14:12] Function Number
* A[11:8] Extended Register Number
* A[7:2] Register Number
* A[1:0] Along with size of the access, used to generate Byte Enables
* For VR9, only the address bits [22:0] are mapped to the configuration space:
* . Address bits [22:20] select the target bus (1-of-8)1)
* . Address bits [19:15] select the target device (1-of-32) on the bus
* . Address bits [14:12] select the target function (1-of-8) within the device.
* . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
* . Address bits [1:0] define the start byte location within the selected dword.
*/
static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where)
{
unsigned int addr;
u8 bus;
if (!bus_num) {
/* type 0 */
addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
} else {
bus = bus_num;
/* type 1, only support 8 buses */
addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
}
IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
__func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
return addr;
}
static int pcie_valid_config(int pcie_port, int bus, int dev)
{
/* RC itself */
if ((bus == 0) && (dev == 0))
return 1;
/* No physical link */
if (!ifx_pcie_link_up(pcie_port))
return 0;
/* Bus zero only has RC itself
* XXX, check if EP will be integrated
*/
if ((bus == 0) && (dev != 0))
return 0;
/* Maximum 8 buses supported for VRX */
if (bus > 9)
return 0;
/*
* PCIe is PtP link, one bus only supports only one device
* except bus zero and PCIe switch which is virtual bus device
* The following two conditions really depends on the system design
* and attached the device.
* XXX, how about more new switch
*/
if ((bus == 1) && (dev != 0))
return 0;
if ((bus >= 3) && (dev != 0))
return 0;
return 1;
}
static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg)
{
return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
}
static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
{
IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
}
static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg)
{
return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
}
static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
{
IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
}
unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value)
{
unsigned int tvalue = value;
if (where == PCI_PRIMARY_BUS) {
u8 primary, secondary, subordinate;
primary = tvalue & 0xFF;
secondary = (tvalue >> 8) & 0xFF;
subordinate = (tvalue >> 16) & 0xFF;
primary += pcibios_1st_host_bus_nr();
secondary += pcibios_1st_host_bus_nr();
subordinate += pcibios_1st_host_bus_nr();
tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
}
return tvalue;
}
unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value)
{
unsigned int tvalue = value;
if (where == PCI_PRIMARY_BUS) {
u8 primary, secondary, subordinate;
primary = tvalue & 0xFF;
secondary = (tvalue >> 8) & 0xFF;
subordinate = (tvalue >> 16) & 0xFF;
if (primary > 0 && primary != 0xFF)
primary -= pcibios_1st_host_bus_nr();
if (secondary > 0 && secondary != 0xFF)
secondary -= pcibios_1st_host_bus_nr();
if (subordinate > 0 && subordinate != 0xFF)
subordinate -= pcibios_1st_host_bus_nr();
tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
} else if (where == PCI_SUBORDINATE_BUS) {
u8 subordinate = tvalue & 0xFF;
subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
tvalue = subordinate;
}
return tvalue;
}
/**
* \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
* int where, int size, unsigned int *value)
* \brief Read a value from configuration space
*
* \param[in] bus Pointer to pci bus
* \param[in] devfn PCI device function number
* \param[in] where PCI register number
* \param[in] size Register read size
* \param[out] value Pointer to return value
* \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
* \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported
* \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
* \return PCIBIOS_SUCCESSFUL OK
* \ingroup IFX_PCIE_OS
*/
static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value)
{
unsigned int data = 0;
int bus_number = bus->number;
static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
int ret = PCIBIOS_SUCCESSFUL;
struct ifx_pci_controller *ctrl = bus->sysdata;
int pcie_port = ctrl->port;
if (unlikely(size != 1 && size != 2 && size != 4)){
ret = PCIBIOS_BAD_REGISTER_NUMBER;
goto out;
}
/* Make sure the address is aligned to natural boundary */
if (unlikely(((size - 1) & where))) {
ret = PCIBIOS_BAD_REGISTER_NUMBER;
goto out;
}
/*
* If we are second controller, we have to cheat OS so that it assume
* its bus number starts from 0 in host controller
*/
bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
/*
* We need to force the bus number to be zero on the root
* bus. Linux numbers the 2nd root bus to start after all
* busses on root 0.
*/
if (bus->parent == NULL)
bus_number = 0;
/*
* PCIe only has a single device connected to it. It is
* always device ID 0. Don't bother doing reads for other
* device IDs on the first segment.
*/
if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
ret = PCIBIOS_FUNC_NOT_SUPPORTED;
goto out;
}
if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
*value = 0xffffffff;
ret = PCIBIOS_DEVICE_NOT_FOUND;
goto out;
}
IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
PCIE_IRQ_LOCK(ifx_pcie_lock);
if (bus_number == 0) { /* RC itself */
unsigned int t;
t = (where & ~3);
data = ifx_pcie_rc_cfg_rd(pcie_port, t);
IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
__func__, t, data);
} else {
unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
data = ifx_pcie_cfg_rd(pcie_port, addr);
if (pcie_port == IFX_PCIE_PORT0) {
#ifdef CONFIG_IFX_PCIE_HW_SWAP
data = le32_to_cpu(data);
#endif /* CONFIG_IFX_PCIE_HW_SWAP */
} else {
#ifdef CONFIG_IFX_PCIE1_HW_SWAP
data = le32_to_cpu(data);
#endif /* CONFIG_IFX_PCIE_HW_SWAP */
}
}
/* To get a correct PCI topology, we have to restore the bus number to OS */
data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
PCIE_IRQ_UNLOCK(ifx_pcie_lock);
IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
__func__, (data >> (8 * (where & 3))) & mask[size & 7], data);
*value = (data >> (8 * (where & 3))) & mask[size & 7];
out:
return ret;
}
static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value)
{
unsigned int shift;
unsigned int tdata = data;
switch (size) {
case 1:
shift = (where & 0x3) << 3;
tdata &= ~(0xffU << shift);
tdata |= ((value & 0xffU) << shift);
break;
case 2:
shift = (where & 3) << 3;
tdata &= ~(0xffffU << shift);
tdata |= ((value & 0xffffU) << shift);
break;
case 4:
tdata = value;
break;
}
return tdata;
}
/**
* \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
* int where, int size, unsigned int value)
* \brief Write a value to PCI configuration space
*
* \param[in] bus Pointer to pci bus
* \param[in] devfn PCI device function number
* \param[in] where PCI register number
* \param[in] size The register size to be written
* \param[in] value The valule to be written
* \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
* \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
* \return PCIBIOS_SUCCESSFUL OK
* \ingroup IFX_PCIE_OS
*/
static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value)
{
int bus_number = bus->number;
int ret = PCIBIOS_SUCCESSFUL;
struct ifx_pci_controller *ctrl = bus->sysdata;
int pcie_port = ctrl->port;
unsigned int tvalue = value;
unsigned int data;
/* Make sure the address is aligned to natural boundary */
if (unlikely(((size - 1) & where))) {
ret = PCIBIOS_BAD_REGISTER_NUMBER;
goto out;
}
/*
* If we are second controller, we have to cheat OS so that it assume
* its bus number starts from 0 in host controller
*/
bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
/*
* We need to force the bus number to be zero on the root
* bus. Linux numbers the 2nd root bus to start after all
* busses on root 0.
*/
if (bus->parent == NULL)
bus_number = 0;
if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
ret = PCIBIOS_DEVICE_NOT_FOUND;
goto out;
}
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__,
bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
/* XXX, some PCIe device may need some delay */
PCIE_IRQ_LOCK(ifx_pcie_lock);
/*
* To configure the correct bus topology using native way, we have to cheat Os so that
* it can configure the PCIe hardware correctly.
*/
tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
if (bus_number == 0) { /* RC itself */
unsigned int t;
t = (where & ~3);
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
data = ifx_pcie_rc_cfg_rd(pcie_port, t);
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
data = ifx_pcie_size_to_value(where, size, data, tvalue);
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
ifx_pcie_rc_cfg_wr(pcie_port, t, data);
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n",
__func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
} else {
unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
data = ifx_pcie_cfg_rd(pcie_port, addr);
if (pcie_port == IFX_PCIE_PORT0) {
#ifdef CONFIG_IFX_PCIE_HW_SWAP
data = le32_to_cpu(data);
#endif /* CONFIG_IFX_PCIE_HW_SWAP */
} else {
#ifdef CONFIG_IFX_PCIE1_HW_SWAP
data = le32_to_cpu(data);
#endif /* CONFIG_IFX_PCIE_HW_SWAP */
}
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
data = ifx_pcie_size_to_value(where, size, data, tvalue);
if (pcie_port == IFX_PCIE_PORT0) {
#ifdef CONFIG_IFX_PCIE_HW_SWAP
data = cpu_to_le32(data);
#endif /* CONFIG_IFX_PCIE_HW_SWAP */
} else {
#ifdef CONFIG_IFX_PCIE1_HW_SWAP
data = cpu_to_le32(data);
#endif /* CONFIG_IFX_PCIE_HW_SWAP */
}
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
ifx_pcie_cfg_wr(pcie_port, addr, data);
IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n",
__func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
}
PCIE_IRQ_UNLOCK(ifx_pcie_lock);
out:
return ret;
}
static struct resource ifx_pcie_io_resource = {
.name = "PCIe0 I/O space",
.start = PCIE_IO_PHY_BASE,
.end = PCIE_IO_PHY_END,
.flags = IORESOURCE_IO,
};
static struct resource ifx_pcie_mem_resource = {
.name = "PCIe0 Memory space",
.start = PCIE_MEM_PHY_BASE,
.end = PCIE_MEM_PHY_END,
.flags = IORESOURCE_MEM,
};
static struct pci_ops ifx_pcie_ops = {
.read = ifx_pcie_read_config,
.write = ifx_pcie_write_config,
};
static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
{
.pcic = {
.pci_ops = &ifx_pcie_ops,
.mem_resource = &ifx_pcie_mem_resource,
.io_resource = &ifx_pcie_io_resource,
},
.port = IFX_PCIE_PORT0,
},
};
static inline void pcie_core_int_clear_all(int pcie_port)
{
unsigned int reg;
reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
reg &= PCIE_RC_CORE_COMBINED_INT;
IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
}
static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
{
struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
int pcie_port = ctrl->port;
IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
pcie_core_int_clear_all(pcie_port);
return IRQ_HANDLED;
}
static int pcie_rc_core_int_init(int pcie_port)
{
int ret;
/* Enable core interrupt */
IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
/* Clear it first */
IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
if (ret)
printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
return ret;
}
int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
unsigned int irq_bit = 0;
int irq = 0;
struct ifx_pci_controller *ctrl = dev->bus->sysdata;
int pcie_port = ctrl->port;
IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
return -1;
}
/* Pin index so minus one */
irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
return irq;
}
/**
* \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
* \brief Called to perform platform specific PCI setup
*
* \param[in] dev The Linux PCI device structure for the device to map
* \return OK
* \ingroup IFX_PCIE_OS
*/
int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
{
u16 config;
unsigned int dconfig;
int pos;
/* Enable reporting System errors and parity errors on all devices */
/* Enable parity checking and error reporting */
pci_read_config_word(dev, PCI_COMMAND, &config);
config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
PCI_COMMAND_FAST_BACK*/;
pci_write_config_word(dev, PCI_COMMAND, config);
if (dev->subordinate) {
/* Set latency timers on sub bridges */
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
/* More bridge error detection */
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
}
/* Enable the PCIe normal error reporting */
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pos) {
/* Disable system error generation in response to error messages */
pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
/* Clear PCIE Capability's Device Status */
pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
/* Update Device Control */
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
/* Correctable Error Reporting */
config |= PCI_EXP_DEVCTL_CERE;
/* Non-Fatal Error Reporting */
config |= PCI_EXP_DEVCTL_NFERE;
/* Fatal Error Reporting */
config |= PCI_EXP_DEVCTL_FERE;
/* Unsupported Request */
config |= PCI_EXP_DEVCTL_URRE;
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
}
/* Find the Advanced Error Reporting capability */
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (pos) {
/* Clear Uncorrectable Error Status */
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
/* Enable reporting of all uncorrectable errors */
/* Uncorrectable Error Mask - turned on bits disable errors */
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
/*
* Leave severity at HW default. This only controls if
* errors are reported as uncorrectable or
* correctable, not if the error is reported.
*/
/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
/* Clear Correctable Error Status */
pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
/* Enable reporting of all correctable errors */
/* Correctable Error Mask - turned on bits disable errors */
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
/* Advanced Error Capabilities */
pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
/* ECRC Generation Enable */
if (dconfig & PCI_ERR_CAP_ECRC_GENC)
dconfig |= PCI_ERR_CAP_ECRC_GENE;
/* ECRC Check Enable */
if (dconfig & PCI_ERR_CAP_ECRC_CHKC)
dconfig |= PCI_ERR_CAP_ECRC_CHKE;
pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
/* Enable Root Port's interrupt in response to error messages */
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
PCI_ERR_ROOT_CMD_COR_EN |
PCI_ERR_ROOT_CMD_NONFATAL_EN |
PCI_ERR_ROOT_CMD_FATAL_EN);
/* Clear the Root status register */
pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
}
/* WAR, only 128 MRRS is supported, force all EPs to support this value */
pcie_set_readrq(dev, 128);
return 0;
}
static void pcie_phy_rst(int pcie_port)
{
pcie_phy_rst_assert(pcie_port);
pcie_phy_rst_deassert(pcie_port);
/* Make sure PHY PLL is stable */
udelay(20);
}
static int pcie_rc_initialize(int pcie_port)
{
int i;
pcie_rcu_endian_setup(pcie_port);
pcie_ep_gpio_rst_init(pcie_port);
/*
* XXX, PCIe elastic buffer bug will cause not to be detected. One more
* reset PCIe PHY will solve this issue
*/
for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
/* Disable PCIe PHY Analog part for sanity check */
pcie_phy_pmu_disable(pcie_port);
pcie_phy_rst(pcie_port);
/* PCIe Core reset enabled, low active, sw programmed */
pcie_core_rst_assert(pcie_port);
/* Put PCIe EP in reset status */
pcie_device_rst_assert(pcie_port);
/* PCI PHY & Core reset disabled, high active, sw programmed */
pcie_core_rst_deassert(pcie_port);
/* Already in a quiet state, program PLL, enable PHY, check ready bit */
pcie_phy_clock_mode_setup(pcie_port);
/* Enable PCIe PHY and Clock */
pcie_core_pmu_setup(pcie_port);
/* Clear status registers */
pcie_status_register_clear(pcie_port);
#ifdef CONFIG_PCI_MSI
pcie_msi_init(pcie_port);
#endif /* CONFIG_PCI_MSI */
pcie_rc_cfg_reg_setup(pcie_port);
/* Once link is up, break out */
if (pcie_app_loigc_setup(pcie_port) == 0)
break;
}
if (i >= IFX_PCIE_PHY_LOOP_CNT) {
printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
return -EIO;
}
/* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
pcie_replay_time_update(pcie_port);
return 0;
}
static int inline ifx_pcie_startup_port_nr(void)
{
int pcie_port = IFX_PCIE_PORT0;
pcie_port = IFX_PCIE_PORT0;
return pcie_port;
}
/**
* \fn static int __init ifx_pcie_bios_init(void)
* \brief Initialize the IFX PCIe controllers
*
* \return -EIO PCIe PHY link is not up
* \return -ENOMEM Configuration/IO space failed to map
* \return 0 OK
* \ingroup IFX_PCIE_OS
*/
extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev);
extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
static int __devinit ltq_pcie_probe(struct platform_device *pdev)
{
char ver_str[128] = {0};
void __iomem *io_map_base;
int pcie_port;
int startup_port;
ltqpci_map_irq = ifx_pcie_bios_map_irq;
ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
/* Enable AHB Master/ Slave */
pcie_ahb_pmu_setup();
startup_port = ifx_pcie_startup_port_nr();
ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset");
for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
if (pcie_rc_initialize(pcie_port) == 0) {
/* Otherwise, warning will pop up */
io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
if (io_map_base == NULL)
return -ENOMEM;
ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
/* XXX, clear error status */
pcie_rc_core_int_init(pcie_port);
}
}
printk(KERN_INFO "%s", ver_str);
return 0;
}
static struct platform_driver ltq_pcie_driver = {
.probe = ltq_pcie_probe,
.driver = {
.name = "pcie-xway",
.owner = THIS_MODULE,
},
};
int __init pciebios_init(void)
{
return platform_driver_register(&ltq_pcie_driver);
}
arch_initcall(pciebios_init);