mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
c764c512ac
TP-Link RE450 v3 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v2 besides a modified flash layout (hence I think force-flashing a RE450v2 image will lead to at least loss of MAC address). Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button- - possible UART header on PCB¹ Flash instruction: Apply factory image in OEM firmware web-gui. ¹ Didn't check to connect as I didn't even manage to connect on RE450v2 (AFAIU it requires disconnecting some resistors, which I was too much of a coward to do). But given the similarities to v2 I think it's the same or very similar procedure (and most likely also the only way to debrick). Signed-off-by: Andreas Wiese <aw-openwrt@meterriblecrew.net> [remove dts-v1 and compatible in DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
54 lines
838 B
Plaintext
54 lines
838 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/dts-v1/;
|
|
|
|
#include "qca9563_tplink_re450.dtsi"
|
|
|
|
/ {
|
|
compatible = "tplink,re450-v3", "qca,qca9563";
|
|
model = "TP-Link RE450 v3";
|
|
};
|
|
|
|
&partitions {
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x000000 0x020000>;
|
|
read-only;
|
|
};
|
|
|
|
info: partition@20000 {
|
|
label = "info";
|
|
reg = <0x020000 0x002000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@22000 {
|
|
label = "partition-table";
|
|
reg = <0x022000 0x002000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@24000 {
|
|
label = "info2";
|
|
reg = <0x024000 0x00a000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@2e000 {
|
|
label = "config";
|
|
reg = <0x02e000 0x022000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
compatible = "tplink,firmware";
|
|
label = "firmware";
|
|
reg = <0x050000 0x7a0000>;
|
|
};
|
|
|
|
art: partition@7f0000 {
|
|
label = "art";
|
|
reg = <0x7f0000 0x010000>;
|
|
read-only;
|
|
};
|
|
};
|