openwrt/target/linux/ramips/dts/mt7620a_fon_fon2601.dts
Christian Marangi 19c45b95db
ramips: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

193 lines
3.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-only
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "fon,fon2601", "ralink,mt7620a-soc";
model = "Fon FON2601";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power_r {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
internet_g {
label = "green:internet";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
net_g {
label = "green:net";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
wifi_g {
label = "green:wifi";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
};
partition@50000 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,padding = <32>;
label = "firmware";
reg = <0x50000 0xf90000>;
};
partition@fe0000 {
label = "board_data";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};
&state_default {
gpio {
groups = "i2c", "uartf";
function = "gpio";
};
nd_sd {
groups = "nd_sd";
function = "sd";
};
spi_cs {
groups = "spi refclk";
function = "spi refclk";
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins &mdio_pins>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4-gmac;
mediatek,ephy-base = /bits/ 8 <8>;
};
&wmac {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
pinctrl-names = "default", "pa_gpio";
pinctrl-0 = <&pa_pins>, <&wled_pins>;
pinctrl-1 = <&pa_gpio_pins>, <&wled_pins>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};