openwrt/target/linux/ramips/dts/mt7620a_dlink_dwr-96x.dtsi
Christian Marangi 19c45b95db
ramips: convert to new LED color/function format where possible
Initial conversion to new LED color/function format
and drop label format where possible. The same label
is composed at runtime.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

192 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* D-Link DWR-96x Common Board Description
* Copyright 2022 Pawel Dembicki <paweldembicki@gmail.com>
*/
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_status: status {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wan {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
sms {
label = "green:sms";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
signal_green {
label = "green:signal";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
};
signal_red {
label = "red:signal";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
4g {
label = "green:4g";
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
3g {
label = "green:3g";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "green:wlan5g";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan2g {
label = "green:wlan2g";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
};
&ehci {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&ohci {
status = "okay";
};
&pcie {
status = "okay";
};
&pcie0 {
wifi: wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "jboot";
reg = <0x0 0x10000>;
read-only;
};
partition@10000 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
openwrt,offset = <0x10000>;
label = "firmware";
reg = <0x10000 0xfe0000>;
};
config: partition@ff0000 {
label = "config";
reg = <0xff0000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_config_e08e: eeprom@e08e {
reg = <0xe08e 0x200>;
};
eeprom_config_e29e: eeprom@e29e {
reg = <0xe29e 0x200>;
};
macaddr_config_e50e: macaddr@e50e {
compatible = "mac-base";
reg = <0xe50e 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
&state_default {
default {
groups = "i2c", "wled", "spi refclk", "uartf", "ephy";
function = "gpio";
};
};