mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-06 11:09:31 +00:00
deba38f2a7
If the CPU port is not forced up, the link, at least on this board, is lost after changes are applied. This makes sure that the link is restored. Regression tests should confirm it doesn't break other boards. Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40305
1100 lines
25 KiB
C
1100 lines
25 KiB
C
/*
|
|
* rtl8306.c: RTL8306S switch driver
|
|
*
|
|
* Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/if.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/netlink.h>
|
|
#include <net/genetlink.h>
|
|
#include <linux/switch.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/phy.h>
|
|
|
|
//#define DEBUG 1
|
|
|
|
/* Global (PHY0) */
|
|
#define RTL8306_REG_PAGE 16
|
|
#define RTL8306_REG_PAGE_LO (1 << 15)
|
|
#define RTL8306_REG_PAGE_HI (1 << 1) /* inverted */
|
|
|
|
#define RTL8306_NUM_VLANS 16
|
|
#define RTL8306_NUM_PORTS 6
|
|
#define RTL8306_PORT_CPU 5
|
|
#define RTL8306_NUM_PAGES 4
|
|
#define RTL8306_NUM_REGS 32
|
|
|
|
#define RTL_NAME_S "RTL8306S"
|
|
#define RTL_NAME_SD "RTL8306SD"
|
|
#define RTL_NAME_SDM "RTL8306SDM"
|
|
#define RTL_NAME_UNKNOWN "RTL8306(unknown)"
|
|
|
|
#define RTL8306_MAGIC 0x8306
|
|
|
|
static LIST_HEAD(phydevs);
|
|
|
|
struct rtl_priv {
|
|
struct list_head list;
|
|
struct switch_dev dev;
|
|
int page;
|
|
int type;
|
|
int do_cpu;
|
|
struct mii_bus *bus;
|
|
char hwname[sizeof(RTL_NAME_UNKNOWN)];
|
|
bool fixup;
|
|
};
|
|
|
|
struct rtl_phyregs {
|
|
int nway;
|
|
int speed;
|
|
int duplex;
|
|
};
|
|
|
|
#define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev)
|
|
|
|
enum {
|
|
RTL_TYPE_S,
|
|
RTL_TYPE_SD,
|
|
RTL_TYPE_SDM,
|
|
};
|
|
|
|
struct rtl_reg {
|
|
int page;
|
|
int phy;
|
|
int reg;
|
|
int bits;
|
|
int shift;
|
|
int inverted;
|
|
};
|
|
|
|
#define RTL_VLAN_REGOFS(name) \
|
|
(RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name)
|
|
|
|
#define RTL_PORT_REGOFS(name) \
|
|
(RTL_REG_PORT1_##name - RTL_REG_PORT0_##name)
|
|
|
|
#define RTL_PORT_REG(id, reg) \
|
|
(RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg)))
|
|
|
|
#define RTL_VLAN_REG(id, reg) \
|
|
(RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg)))
|
|
|
|
#define RTL_GLOBAL_REGATTR(reg) \
|
|
.id = RTL_REG_##reg, \
|
|
.type = SWITCH_TYPE_INT, \
|
|
.ofs = 0, \
|
|
.set = rtl_attr_set_int, \
|
|
.get = rtl_attr_get_int
|
|
|
|
#define RTL_PORT_REGATTR(reg) \
|
|
.id = RTL_REG_PORT0_##reg, \
|
|
.type = SWITCH_TYPE_INT, \
|
|
.ofs = RTL_PORT_REGOFS(reg), \
|
|
.set = rtl_attr_set_port_int, \
|
|
.get = rtl_attr_get_port_int
|
|
|
|
#define RTL_VLAN_REGATTR(reg) \
|
|
.id = RTL_REG_VLAN0_##reg, \
|
|
.type = SWITCH_TYPE_INT, \
|
|
.ofs = RTL_VLAN_REGOFS(reg), \
|
|
.set = rtl_attr_set_vlan_int, \
|
|
.get = rtl_attr_get_vlan_int
|
|
|
|
enum rtl_regidx {
|
|
RTL_REG_CHIPID,
|
|
RTL_REG_CHIPVER,
|
|
RTL_REG_CHIPTYPE,
|
|
RTL_REG_CPUPORT,
|
|
|
|
RTL_REG_EN_CPUPORT,
|
|
RTL_REG_EN_TAG_OUT,
|
|
RTL_REG_EN_TAG_CLR,
|
|
RTL_REG_EN_TAG_IN,
|
|
RTL_REG_TRAP_CPU,
|
|
RTL_REG_CPU_LINKUP,
|
|
RTL_REG_TRUNK_PORTSEL,
|
|
RTL_REG_EN_TRUNK,
|
|
RTL_REG_RESET,
|
|
|
|
RTL_REG_VLAN_ENABLE,
|
|
RTL_REG_VLAN_FILTER,
|
|
RTL_REG_VLAN_TAG_ONLY,
|
|
RTL_REG_VLAN_TAG_AWARE,
|
|
#define RTL_VLAN_ENUM(id) \
|
|
RTL_REG_VLAN##id##_VID, \
|
|
RTL_REG_VLAN##id##_PORTMASK
|
|
RTL_VLAN_ENUM(0),
|
|
RTL_VLAN_ENUM(1),
|
|
RTL_VLAN_ENUM(2),
|
|
RTL_VLAN_ENUM(3),
|
|
RTL_VLAN_ENUM(4),
|
|
RTL_VLAN_ENUM(5),
|
|
RTL_VLAN_ENUM(6),
|
|
RTL_VLAN_ENUM(7),
|
|
RTL_VLAN_ENUM(8),
|
|
RTL_VLAN_ENUM(9),
|
|
RTL_VLAN_ENUM(10),
|
|
RTL_VLAN_ENUM(11),
|
|
RTL_VLAN_ENUM(12),
|
|
RTL_VLAN_ENUM(13),
|
|
RTL_VLAN_ENUM(14),
|
|
RTL_VLAN_ENUM(15),
|
|
#define RTL_PORT_ENUM(id) \
|
|
RTL_REG_PORT##id##_PVID, \
|
|
RTL_REG_PORT##id##_NULL_VID_REPLACE, \
|
|
RTL_REG_PORT##id##_NON_PVID_DISCARD, \
|
|
RTL_REG_PORT##id##_VID_INSERT, \
|
|
RTL_REG_PORT##id##_TAG_INSERT, \
|
|
RTL_REG_PORT##id##_LINK, \
|
|
RTL_REG_PORT##id##_SPEED, \
|
|
RTL_REG_PORT##id##_NWAY, \
|
|
RTL_REG_PORT##id##_NRESTART, \
|
|
RTL_REG_PORT##id##_DUPLEX, \
|
|
RTL_REG_PORT##id##_RXEN, \
|
|
RTL_REG_PORT##id##_TXEN
|
|
RTL_PORT_ENUM(0),
|
|
RTL_PORT_ENUM(1),
|
|
RTL_PORT_ENUM(2),
|
|
RTL_PORT_ENUM(3),
|
|
RTL_PORT_ENUM(4),
|
|
RTL_PORT_ENUM(5),
|
|
};
|
|
|
|
static const struct rtl_reg rtl_regs[] = {
|
|
[RTL_REG_CHIPID] = { 0, 4, 30, 16, 0, 0 },
|
|
[RTL_REG_CHIPVER] = { 0, 4, 31, 8, 0, 0 },
|
|
[RTL_REG_CHIPTYPE] = { 0, 4, 31, 2, 8, 0 },
|
|
|
|
/* CPU port number */
|
|
[RTL_REG_CPUPORT] = { 2, 4, 21, 3, 0, 0 },
|
|
/* Enable CPU port function */
|
|
[RTL_REG_EN_CPUPORT] = { 3, 2, 21, 1, 15, 1 },
|
|
/* Enable CPU port tag insertion */
|
|
[RTL_REG_EN_TAG_OUT] = { 3, 2, 21, 1, 12, 0 },
|
|
/* Enable CPU port tag removal */
|
|
[RTL_REG_EN_TAG_CLR] = { 3, 2, 21, 1, 11, 0 },
|
|
/* Enable CPU port tag checking */
|
|
[RTL_REG_EN_TAG_IN] = { 0, 4, 21, 1, 7, 0 },
|
|
[RTL_REG_EN_TRUNK] = { 0, 0, 19, 1, 11, 1 },
|
|
[RTL_REG_TRUNK_PORTSEL] = { 0, 0, 16, 1, 6, 1 },
|
|
[RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 },
|
|
|
|
[RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 },
|
|
[RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 },
|
|
|
|
[RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 },
|
|
[RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 },
|
|
[RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16, 1, 10, 1 },
|
|
[RTL_REG_VLAN_ENABLE] = { 0, 0, 18, 1, 8, 1 },
|
|
|
|
#define RTL_VLAN_REGS(id, phy, page, regofs) \
|
|
[RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
|
|
[RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
|
|
RTL_VLAN_REGS( 0, 0, 0, 0),
|
|
RTL_VLAN_REGS( 1, 1, 0, 0),
|
|
RTL_VLAN_REGS( 2, 2, 0, 0),
|
|
RTL_VLAN_REGS( 3, 3, 0, 0),
|
|
RTL_VLAN_REGS( 4, 4, 0, 0),
|
|
RTL_VLAN_REGS( 5, 0, 1, 2),
|
|
RTL_VLAN_REGS( 6, 1, 1, 2),
|
|
RTL_VLAN_REGS( 7, 2, 1, 2),
|
|
RTL_VLAN_REGS( 8, 3, 1, 2),
|
|
RTL_VLAN_REGS( 9, 4, 1, 2),
|
|
RTL_VLAN_REGS(10, 0, 1, 4),
|
|
RTL_VLAN_REGS(11, 1, 1, 4),
|
|
RTL_VLAN_REGS(12, 2, 1, 4),
|
|
RTL_VLAN_REGS(13, 3, 1, 4),
|
|
RTL_VLAN_REGS(14, 4, 1, 4),
|
|
RTL_VLAN_REGS(15, 0, 1, 6),
|
|
|
|
#define REG_PORT_SETTING(port, phy) \
|
|
[RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
|
|
[RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
|
|
[RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
|
|
[RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
|
|
[RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
|
|
[RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
|
|
[RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
|
|
[RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
|
|
[RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
|
|
[RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
|
|
[RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
|
|
|
|
REG_PORT_SETTING(0, 0),
|
|
REG_PORT_SETTING(1, 1),
|
|
REG_PORT_SETTING(2, 2),
|
|
REG_PORT_SETTING(3, 3),
|
|
REG_PORT_SETTING(4, 4),
|
|
REG_PORT_SETTING(5, 6),
|
|
|
|
#define REG_PORT_PVID(phy, page, regofs) \
|
|
{ page, phy, 24 + regofs, 4, 12, 0 }
|
|
[RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
|
|
[RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
|
|
[RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
|
|
[RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
|
|
[RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
|
|
[RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
|
|
};
|
|
|
|
|
|
static inline void
|
|
rtl_set_page(struct rtl_priv *priv, unsigned int page)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 pgsel;
|
|
|
|
if (priv->fixup)
|
|
return;
|
|
|
|
if (priv->page == page)
|
|
return;
|
|
|
|
BUG_ON(page > RTL8306_NUM_PAGES);
|
|
pgsel = bus->read(bus, 0, RTL8306_REG_PAGE);
|
|
pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
|
|
if (page & (1 << 0))
|
|
pgsel |= RTL8306_REG_PAGE_LO;
|
|
if (!(page & (1 << 1))) /* bit is inverted */
|
|
pgsel |= RTL8306_REG_PAGE_HI;
|
|
bus->write(bus, 0, RTL8306_REG_PAGE, pgsel);
|
|
}
|
|
|
|
static inline int
|
|
rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
rtl_set_page(priv, page);
|
|
bus->write(bus, phy, reg, val);
|
|
bus->read(bus, phy, reg); /* flush */
|
|
return 0;
|
|
}
|
|
|
|
static inline int
|
|
rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
rtl_set_page(priv, page);
|
|
return bus->read(bus, phy, reg);
|
|
}
|
|
|
|
static inline u16
|
|
rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 r;
|
|
|
|
rtl_set_page(priv, page);
|
|
r = bus->read(bus, phy, reg);
|
|
r &= ~mask;
|
|
r |= val;
|
|
bus->write(bus, phy, reg, r);
|
|
return bus->read(bus, phy, reg); /* flush */
|
|
}
|
|
|
|
|
|
static inline int
|
|
rtl_get(struct switch_dev *dev, enum rtl_regidx s)
|
|
{
|
|
const struct rtl_reg *r = &rtl_regs[s];
|
|
u16 val;
|
|
|
|
BUG_ON(s >= ARRAY_SIZE(rtl_regs));
|
|
if (r->bits == 0) /* unimplemented */
|
|
return 0;
|
|
|
|
val = rtl_r16(dev, r->page, r->phy, r->reg);
|
|
|
|
if (r->shift > 0)
|
|
val >>= r->shift;
|
|
|
|
if (r->inverted)
|
|
val = ~val;
|
|
|
|
val &= (1 << r->bits) - 1;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int
|
|
rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val)
|
|
{
|
|
const struct rtl_reg *r = &rtl_regs[s];
|
|
u16 mask = 0xffff;
|
|
|
|
BUG_ON(s >= ARRAY_SIZE(rtl_regs));
|
|
|
|
if (r->bits == 0) /* unimplemented */
|
|
return 0;
|
|
|
|
if (r->shift > 0)
|
|
val <<= r->shift;
|
|
|
|
if (r->inverted)
|
|
val = ~val;
|
|
|
|
if (r->bits != 16) {
|
|
mask = (1 << r->bits) - 1;
|
|
mask <<= r->shift;
|
|
}
|
|
val &= mask;
|
|
return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val);
|
|
}
|
|
|
|
static void
|
|
rtl_fix_pvids(struct switch_dev *dev)
|
|
{
|
|
unsigned int port, vlan, mask;
|
|
|
|
for (port = 0; port < RTL8306_NUM_PORTS; port++)
|
|
{
|
|
/* skip tagged ports */
|
|
if (rtl_get(dev, RTL_PORT_REG(port, TAG_INSERT)) != 1)
|
|
continue;
|
|
|
|
for (vlan = 0; vlan < RTL8306_NUM_VLANS; vlan++)
|
|
{
|
|
mask = rtl_get(dev, RTL_VLAN_REG(vlan, PORTMASK));
|
|
/* skip non-members */
|
|
if (!(mask & (1 << port)))
|
|
continue;
|
|
|
|
rtl_set(dev, RTL_PORT_REG(port, PVID), vlan);
|
|
/* next port */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
rtl_phy_save(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
|
|
{
|
|
regs->nway = rtl_get(dev, RTL_PORT_REG(port, NWAY));
|
|
regs->speed = rtl_get(dev, RTL_PORT_REG(port, SPEED));
|
|
regs->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
|
|
}
|
|
|
|
static void
|
|
rtl_phy_restore(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
|
|
{
|
|
rtl_set(dev, RTL_PORT_REG(port, NWAY), regs->nway);
|
|
rtl_set(dev, RTL_PORT_REG(port, SPEED), regs->speed);
|
|
rtl_set(dev, RTL_PORT_REG(port, DUPLEX), regs->duplex);
|
|
}
|
|
|
|
static void
|
|
rtl_port_set_enable(struct switch_dev *dev, int port, int enabled)
|
|
{
|
|
rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled);
|
|
rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled);
|
|
|
|
if ((port >= 5) || !enabled)
|
|
return;
|
|
|
|
/* restart autonegotiation if enabled */
|
|
rtl_set(dev, RTL_PORT_REG(port, NRESTART), 1);
|
|
}
|
|
|
|
static int
|
|
rtl_hw_apply(struct switch_dev *dev)
|
|
{
|
|
int i;
|
|
int trunk_en, trunk_psel;
|
|
struct rtl_phyregs port5;
|
|
|
|
rtl_phy_save(dev, 5, &port5);
|
|
|
|
/* disable rx/tx from PHYs */
|
|
for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
|
|
rtl_port_set_enable(dev, i, 0);
|
|
}
|
|
|
|
/* save trunking status */
|
|
trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK);
|
|
trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL);
|
|
|
|
/* trunk port 3 and 4
|
|
* XXX: Big WTF, but RealTek seems to do it */
|
|
rtl_set(dev, RTL_REG_EN_TRUNK, 1);
|
|
rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1);
|
|
|
|
/* execute the software reset */
|
|
rtl_set(dev, RTL_REG_RESET, 1);
|
|
|
|
/* wait for the reset to complete,
|
|
* but don't wait for too long */
|
|
for (i = 0; i < 10; i++) {
|
|
if (rtl_get(dev, RTL_REG_RESET) == 0)
|
|
break;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
/* enable rx/tx from PHYs */
|
|
for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
|
|
rtl_port_set_enable(dev, i, 1);
|
|
}
|
|
|
|
/* restore trunking settings */
|
|
rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en);
|
|
rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel);
|
|
rtl_phy_restore(dev, 5, &port5);
|
|
|
|
rtl_set(dev, RTL_REG_CPU_LINKUP, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rtl_hw_init(struct switch_dev *dev)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
int i;
|
|
|
|
rtl_set(dev, RTL_REG_VLAN_ENABLE, 0);
|
|
rtl_set(dev, RTL_REG_VLAN_FILTER, 0);
|
|
rtl_set(dev, RTL_REG_EN_TRUNK, 0);
|
|
rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0);
|
|
|
|
/* initialize cpu port settings */
|
|
if (priv->do_cpu) {
|
|
rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port);
|
|
rtl_set(dev, RTL_REG_EN_CPUPORT, 1);
|
|
} else {
|
|
rtl_set(dev, RTL_REG_CPUPORT, 7);
|
|
rtl_set(dev, RTL_REG_EN_CPUPORT, 0);
|
|
}
|
|
rtl_set(dev, RTL_REG_EN_TAG_OUT, 0);
|
|
rtl_set(dev, RTL_REG_EN_TAG_IN, 0);
|
|
rtl_set(dev, RTL_REG_EN_TAG_CLR, 0);
|
|
|
|
/* reset all vlans */
|
|
for (i = 0; i < RTL8306_NUM_VLANS; i++) {
|
|
rtl_set(dev, RTL_VLAN_REG(i, VID), i);
|
|
rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
/* default to port isolation */
|
|
for (i = 0; i < RTL8306_NUM_PORTS; i++) {
|
|
if (i != dev->cpu_port)
|
|
rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), (1 << dev->cpu_port) | (1 << i));
|
|
rtl_set(dev, RTL_PORT_REG(i, PVID), i);
|
|
rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
|
|
rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
|
|
rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3);
|
|
}
|
|
#endif
|
|
rtl_fix_pvids(dev);
|
|
|
|
rtl_hw_apply(dev);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static int
|
|
rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
priv->do_cpu = val->value.i;
|
|
rtl_hw_init(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
val->value.i = priv->do_cpu;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
dev->cpu_port = val->value.i;
|
|
rtl_hw_init(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
val->value.i = dev->cpu_port;
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
rtl_reset(struct switch_dev *dev)
|
|
{
|
|
rtl_hw_init(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
int idx = attr->id + (val->port_vlan * attr->ofs);
|
|
struct rtl_phyregs port;
|
|
|
|
if (attr->id >= ARRAY_SIZE(rtl_regs))
|
|
return -EINVAL;
|
|
|
|
if ((attr->max > 0) && (val->value.i > attr->max))
|
|
return -EINVAL;
|
|
|
|
/* access to phy register 22 on port 4/5
|
|
* needs phy status save/restore */
|
|
if ((val->port_vlan > 3) &&
|
|
(rtl_regs[idx].reg == 22) &&
|
|
(rtl_regs[idx].page == 0)) {
|
|
|
|
rtl_phy_save(dev, val->port_vlan, &port);
|
|
rtl_set(dev, idx, val->value.i);
|
|
rtl_phy_restore(dev, val->port_vlan, &port);
|
|
} else {
|
|
rtl_set(dev, idx, val->value.i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
int idx = attr->id + (val->port_vlan * attr->ofs);
|
|
|
|
if (idx >= ARRAY_SIZE(rtl_regs))
|
|
return -EINVAL;
|
|
|
|
val->value.i = rtl_get(dev, idx);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static int
|
|
rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
if (val->port_vlan >= RTL8306_NUM_PORTS)
|
|
return -EINVAL;
|
|
|
|
return rtl_attr_set_int(dev, attr, val);
|
|
}
|
|
|
|
static int
|
|
rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
if (val->port_vlan >= RTL8306_NUM_PORTS)
|
|
return -EINVAL;
|
|
return rtl_attr_get_int(dev, attr, val);
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
rtl_attr_set_port_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
unsigned int vlan;
|
|
|
|
if (val->port_vlan >= RTL8306_NUM_PORTS)
|
|
return -EINVAL;
|
|
|
|
for (vlan = 0; vlan < RTL8306_NUM_VLANS; vlan++) {
|
|
if (rtl_get(dev, RTL_VLAN_REG(vlan, VID)) == val->value.i) {
|
|
rtl_set(dev, RTL_PORT_REG(val->port_vlan, PVID), vlan);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_attr_get_port_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
unsigned int vlan;
|
|
|
|
if (val->port_vlan >= RTL8306_NUM_PORTS)
|
|
return -EINVAL;
|
|
|
|
vlan = rtl_get(dev, RTL_PORT_REG(val->port_vlan, PVID));
|
|
val->value.i = rtl_get(dev, RTL_VLAN_REG(vlan, VID));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_get_port_link(struct switch_dev *dev, int port, struct switch_port_link *link)
|
|
{
|
|
if (port >= RTL8306_NUM_PORTS)
|
|
return -EINVAL;
|
|
|
|
link->link = rtl_get(dev, RTL_PORT_REG(port, LINK));
|
|
if (!link->link)
|
|
return 0;
|
|
|
|
link->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
|
|
link->aneg = rtl_get(dev, RTL_PORT_REG(port, NWAY));
|
|
|
|
if (rtl_get(dev, RTL_PORT_REG(port, SPEED)))
|
|
link->speed = SWITCH_PORT_SPEED_100;
|
|
else
|
|
link->speed = SWITCH_PORT_SPEED_10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
if (val->port_vlan >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
return rtl_attr_set_int(dev, attr, val);
|
|
}
|
|
|
|
static int
|
|
rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
if (val->port_vlan >= dev->vlans)
|
|
return -EINVAL;
|
|
|
|
return rtl_attr_get_int(dev, attr, val);
|
|
}
|
|
|
|
static int
|
|
rtl_get_ports(struct switch_dev *dev, struct switch_val *val)
|
|
{
|
|
unsigned int i, mask;
|
|
|
|
mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
|
|
for (i = 0; i < RTL8306_NUM_PORTS; i++) {
|
|
struct switch_port *port;
|
|
|
|
if (!(mask & (1 << i)))
|
|
continue;
|
|
|
|
port = &val->value.ports[val->len];
|
|
port->id = i;
|
|
if (rtl_get(dev, RTL_PORT_REG(i, TAG_INSERT)) == 2)
|
|
port->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
|
|
val->len++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
struct rtl_priv *priv = to_rtl(dev);
|
|
struct rtl_phyregs port;
|
|
int en = val->value.i;
|
|
int i;
|
|
|
|
rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu);
|
|
rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu);
|
|
rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu);
|
|
rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en);
|
|
if (en)
|
|
rtl_set(dev, RTL_REG_VLAN_FILTER, en);
|
|
|
|
for (i = 0; i < RTL8306_NUM_PORTS; i++) {
|
|
if (i > 3)
|
|
rtl_phy_save(dev, val->port_vlan, &port);
|
|
rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
|
|
rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
|
|
rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? 1 : 3));
|
|
if (i > 3)
|
|
rtl_phy_restore(dev, val->port_vlan, &port);
|
|
}
|
|
rtl_set(dev, RTL_REG_VLAN_ENABLE, en);
|
|
|
|
rtl_fix_pvids(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
|
{
|
|
val->value.i = rtl_get(dev, RTL_REG_VLAN_ENABLE);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl_set_ports(struct switch_dev *dev, struct switch_val *val)
|
|
{
|
|
unsigned int mask = 0;
|
|
int i;
|
|
|
|
for(i = 0; i < val->len; i++)
|
|
{
|
|
struct switch_port *port = &val->value.ports[i];
|
|
bool tagged = false;
|
|
|
|
mask |= (1 << port->id);
|
|
|
|
if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
|
|
tagged = true;
|
|
|
|
rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1));
|
|
rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1));
|
|
rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1));
|
|
}
|
|
|
|
rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask);
|
|
|
|
rtl_fix_pvids(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct switch_attr rtl_globals[] = {
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_vlan",
|
|
.description = "Enable VLAN mode",
|
|
.max = 1,
|
|
.set = rtl_set_vlan,
|
|
.get = rtl_get_vlan,
|
|
},
|
|
{
|
|
RTL_GLOBAL_REGATTR(EN_TRUNK),
|
|
.name = "trunk",
|
|
.description = "Enable port trunking",
|
|
.max = 1,
|
|
},
|
|
{
|
|
RTL_GLOBAL_REGATTR(TRUNK_PORTSEL),
|
|
.name = "trunk_sel",
|
|
.description = "Select ports for trunking (0: 0,1 - 1: 3,4)",
|
|
.max = 1,
|
|
},
|
|
#ifdef DEBUG
|
|
{
|
|
RTL_GLOBAL_REGATTR(VLAN_FILTER),
|
|
.name = "vlan_filter",
|
|
.description = "Filter incoming packets for allowed VLANS",
|
|
.max = 1,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "cpuport",
|
|
.description = "CPU Port",
|
|
.set = rtl_set_cpuport,
|
|
.get = rtl_get_cpuport,
|
|
.max = RTL8306_NUM_PORTS,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "use_cpuport",
|
|
.description = "CPU Port handling flag",
|
|
.set = rtl_set_use_cpuport,
|
|
.get = rtl_get_use_cpuport,
|
|
.max = RTL8306_NUM_PORTS,
|
|
},
|
|
{
|
|
RTL_GLOBAL_REGATTR(TRAP_CPU),
|
|
.name = "trap_cpu",
|
|
.description = "VLAN trap to CPU",
|
|
.max = 1,
|
|
},
|
|
{
|
|
RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE),
|
|
.name = "vlan_tag_aware",
|
|
.description = "Enable VLAN tag awareness",
|
|
.max = 1,
|
|
},
|
|
{
|
|
RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY),
|
|
.name = "tag_only",
|
|
.description = "Only accept tagged packets",
|
|
.max = 1,
|
|
},
|
|
#endif
|
|
};
|
|
static struct switch_attr rtl_port[] = {
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.set = rtl_attr_set_port_pvid,
|
|
.get = rtl_attr_get_port_pvid,
|
|
.name = "pvid",
|
|
.description = "Port VLAN ID",
|
|
.max = 4095,
|
|
},
|
|
#ifdef DEBUG
|
|
{
|
|
RTL_PORT_REGATTR(NULL_VID_REPLACE),
|
|
.name = "null_vid",
|
|
.description = "NULL VID gets replaced by port default vid",
|
|
.max = 1,
|
|
},
|
|
{
|
|
RTL_PORT_REGATTR(NON_PVID_DISCARD),
|
|
.name = "non_pvid_discard",
|
|
.description = "discard packets with VID != PVID",
|
|
.max = 1,
|
|
},
|
|
{
|
|
RTL_PORT_REGATTR(VID_INSERT),
|
|
.name = "vid_insert_remove",
|
|
.description = "how should the switch insert and remove vids ?",
|
|
.max = 3,
|
|
},
|
|
{
|
|
RTL_PORT_REGATTR(TAG_INSERT),
|
|
.name = "tag_insert",
|
|
.description = "tag insertion handling",
|
|
.max = 3,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct switch_attr rtl_vlan[] = {
|
|
{
|
|
RTL_VLAN_REGATTR(VID),
|
|
.name = "vid",
|
|
.description = "VLAN ID (1-4095)",
|
|
.max = 4095,
|
|
},
|
|
};
|
|
|
|
static const struct switch_dev_ops rtl8306_ops = {
|
|
.attr_global = {
|
|
.attr = rtl_globals,
|
|
.n_attr = ARRAY_SIZE(rtl_globals),
|
|
},
|
|
.attr_port = {
|
|
.attr = rtl_port,
|
|
.n_attr = ARRAY_SIZE(rtl_port),
|
|
},
|
|
.attr_vlan = {
|
|
.attr = rtl_vlan,
|
|
.n_attr = ARRAY_SIZE(rtl_vlan),
|
|
},
|
|
|
|
.get_vlan_ports = rtl_get_ports,
|
|
.set_vlan_ports = rtl_set_ports,
|
|
.apply_config = rtl_hw_apply,
|
|
.reset_switch = rtl_reset,
|
|
.get_port_link = rtl_get_port_link,
|
|
};
|
|
|
|
static int
|
|
rtl8306_config_init(struct phy_device *pdev)
|
|
{
|
|
struct net_device *netdev = pdev->attached_dev;
|
|
struct rtl_priv *priv = pdev->priv;
|
|
struct switch_dev *dev = &priv->dev;
|
|
struct switch_val val;
|
|
unsigned int chipid, chipver, chiptype;
|
|
int err;
|
|
|
|
/* Only init the switch for the primary PHY */
|
|
if (pdev->addr != 0)
|
|
return 0;
|
|
|
|
val.value.i = 1;
|
|
priv->dev.cpu_port = RTL8306_PORT_CPU;
|
|
priv->dev.ports = RTL8306_NUM_PORTS;
|
|
priv->dev.vlans = RTL8306_NUM_VLANS;
|
|
priv->dev.ops = &rtl8306_ops;
|
|
priv->do_cpu = 0;
|
|
priv->page = -1;
|
|
priv->bus = pdev->bus;
|
|
|
|
chipid = rtl_get(dev, RTL_REG_CHIPID);
|
|
chipver = rtl_get(dev, RTL_REG_CHIPVER);
|
|
chiptype = rtl_get(dev, RTL_REG_CHIPTYPE);
|
|
switch(chiptype) {
|
|
case 0:
|
|
case 2:
|
|
strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname));
|
|
priv->type = RTL_TYPE_S;
|
|
break;
|
|
case 1:
|
|
strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname));
|
|
priv->type = RTL_TYPE_SD;
|
|
break;
|
|
case 3:
|
|
strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname));
|
|
priv->type = RTL_TYPE_SDM;
|
|
break;
|
|
default:
|
|
strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname));
|
|
break;
|
|
}
|
|
|
|
dev->name = priv->hwname;
|
|
rtl_hw_init(dev);
|
|
|
|
printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver);
|
|
|
|
err = register_switch(dev, netdev);
|
|
if (err < 0) {
|
|
kfree(priv);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
rtl8306_fixup(struct phy_device *pdev)
|
|
{
|
|
struct rtl_priv priv;
|
|
u16 chipid;
|
|
|
|
/* Attach to primary LAN port and WAN port */
|
|
if (pdev->addr != 0 && pdev->addr != 4)
|
|
return 0;
|
|
|
|
memset(&priv, 0, sizeof(priv));
|
|
priv.fixup = true;
|
|
priv.page = -1;
|
|
priv.bus = pdev->bus;
|
|
chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
|
|
if (chipid == 0x5988)
|
|
pdev->phy_id = RTL8306_MAGIC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl8306_probe(struct phy_device *pdev)
|
|
{
|
|
struct rtl_priv *priv;
|
|
|
|
list_for_each_entry(priv, &phydevs, list) {
|
|
/*
|
|
* share one rtl_priv instance between virtual phy
|
|
* devices on the same bus
|
|
*/
|
|
if (priv->bus == pdev->bus)
|
|
goto found;
|
|
}
|
|
priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->bus = pdev->bus;
|
|
|
|
found:
|
|
pdev->priv = priv;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rtl8306_remove(struct phy_device *pdev)
|
|
{
|
|
struct rtl_priv *priv = pdev->priv;
|
|
unregister_switch(&priv->dev);
|
|
kfree(priv);
|
|
}
|
|
|
|
static int
|
|
rtl8306_config_aneg(struct phy_device *pdev)
|
|
{
|
|
struct rtl_priv *priv = pdev->priv;
|
|
|
|
/* Only for WAN */
|
|
if (pdev->addr == 0)
|
|
return 0;
|
|
|
|
/* Restart autonegotiation */
|
|
rtl_set(&priv->dev, RTL_PORT_REG(4, NWAY), 1);
|
|
rtl_set(&priv->dev, RTL_PORT_REG(4, NRESTART), 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl8306_read_status(struct phy_device *pdev)
|
|
{
|
|
struct rtl_priv *priv = pdev->priv;
|
|
struct switch_dev *dev = &priv->dev;
|
|
|
|
if (pdev->addr == 4) {
|
|
/* WAN */
|
|
pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
|
|
pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
pdev->link = !!rtl_get(dev, RTL_PORT_REG(4, LINK));
|
|
} else {
|
|
/* LAN */
|
|
pdev->speed = SPEED_100;
|
|
pdev->duplex = DUPLEX_FULL;
|
|
pdev->link = 1;
|
|
}
|
|
|
|
/*
|
|
* Bypass generic PHY status read,
|
|
* it doesn't work with this switch
|
|
*/
|
|
if (pdev->link) {
|
|
pdev->state = PHY_RUNNING;
|
|
netif_carrier_on(pdev->attached_dev);
|
|
pdev->adjust_link(pdev->attached_dev);
|
|
} else {
|
|
pdev->state = PHY_NOLINK;
|
|
netif_carrier_off(pdev->attached_dev);
|
|
pdev->adjust_link(pdev->attached_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct phy_driver rtl8306_driver = {
|
|
.name = "Realtek RTL8306S",
|
|
.flags = PHY_HAS_MAGICANEG,
|
|
.phy_id = RTL8306_MAGIC,
|
|
.phy_id_mask = 0xffffffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.probe = &rtl8306_probe,
|
|
.remove = &rtl8306_remove,
|
|
.config_init = &rtl8306_config_init,
|
|
.config_aneg = &rtl8306_config_aneg,
|
|
.read_status = &rtl8306_read_status,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
|
|
static int __init
|
|
rtl_init(void)
|
|
{
|
|
phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
|
|
return phy_driver_register(&rtl8306_driver);
|
|
}
|
|
|
|
static void __exit
|
|
rtl_exit(void)
|
|
{
|
|
phy_driver_unregister(&rtl8306_driver);
|
|
}
|
|
|
|
module_init(rtl_init);
|
|
module_exit(rtl_exit);
|
|
MODULE_LICENSE("GPL");
|
|
|