Michael Pratt bc00c78b43 ramips: lzma-loader: use default uart for rt305x ... The rt305x series SOC have two UART devices, and the one at bus address 0x500 is disabled by default. Some boards do not even have a pinout for the first one, so use the same one that the kernel uses at 0xc00 instead. This allows the lzma-loader printing to be visible alongside the kernel log in the same console. Tested-by: Lech Perczak <lech.perczak@gmail.com> # zte,mf283plus Signed-off-by: Michael Pratt <mcpratt@pm.me>		2024-01-02 22:10:34 +01:00
..
base-files/etc	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00
dts	ramips: dts: mt7628an: reset FE and ESW cores together	2024-01-02 22:00:19 +01:00
files/drivers	raimps: mtk_eth_soc: drop rst_esw from ESW driver	2024-01-02 22:00:20 +01:00
image	ramips: lzma-loader: use default uart for rt305x	2024-01-02 22:10:34 +01:00
mt76x8	ramips: add TP-LINK TL-WR902AC v4	2023-12-06 22:59:22 +01:00
mt7620	ramips: add support for Sercomm CPJ routers	2023-11-25 01:11:18 +01:00
mt7621	ramips: add support for Rostelecom RT-FE-1A	2023-12-06 00:12:56 +01:00
patches-5.15	ramips: refresh patches	2023-12-08 23:34:42 +00:00
rt288x	ramips: add proper system clock and reset driver support for legacy SoCs	2023-07-30 13:09:23 +02:00
rt305x	ramips: add proper system clock and reset driver support for legacy SoCs	2023-07-30 13:09:23 +02:00
rt3883	ramips: add proper system clock and reset driver support for legacy SoCs	2023-07-30 13:09:23 +02:00
Makefile	ramips: Switch default kernel to 5.15	2023-02-17 16:31:53 +02:00
modules.mk	kernel: modules: break-out WM8960 codec module	2023-12-11 18:01:43 +00:00