mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
216011e424
On the devices with PoE support, the secondary UART (uart1) on the SoC is used to communicate between the SoC and controller. Enable the secondary UART on the following devices: - D-Link DGS-1210-10P - Netgear GS110TPP v1 - Netgear GS310TP v1 - ZyXEL GS1900-8HP v1/v2 - ZyXEL GS1900-10HP - ZyXEL GS1900-24HP v2 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
76 lines
1.6 KiB
Plaintext
76 lines
1.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "rtl8380_zyxel_gs1900.dtsi"
|
|
|
|
/ {
|
|
compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc";
|
|
model = "ZyXEL GS1900-10HP Switch";
|
|
|
|
/* i2c of the left SFP cage: port 9 */
|
|
i2c0: i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
sfp0: sfp-p9 {
|
|
compatible = "sff,sfp";
|
|
i2c-bus = <&i2c0>;
|
|
los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
|
tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
|
mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
|
|
tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
/* i2c of the right SFP cage: port 10 */
|
|
i2c1: i2c-gpio-1 {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
sfp1: sfp-p10 {
|
|
compatible = "sff,sfp";
|
|
i2c-bus = <&i2c1>;
|
|
los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
|
|
tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
|
mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
|
|
tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
INTERNAL_PHY(24)
|
|
INTERNAL_PHY(26)
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
port@24 {
|
|
reg = <24>;
|
|
label = "lan9";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sfp0>;
|
|
};
|
|
|
|
port@26 {
|
|
reg = <26>;
|
|
label = "lan10";
|
|
phy-mode = "1000base-x";
|
|
managed = "in-band-status";
|
|
sfp = <&sfp1>;
|
|
};
|
|
};
|
|
};
|