mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
620f9c7734
This submission relied heavily on the work of
Santiago Rodriguez-Papa <contact at rodsan.dev>
Specifications:
* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: Winbond W632GG6MB-12 (256M DDR3-1600)
* Flash: Winbond W29N01HVSINA (128M NAND)
* Eth: MediaTek MT7621A (10/100/1000 Mbps x5)
* Radio: MT7603E/MT7615N (2.4 GHz & 5 GHz)
4 antennae: 1 internal and 3 non-deatachable
* USB: 3.0 (x1)
* LEDs:
White (x1 logo)
Green (x6 eth + wps)
Orange (x5, hardware-bound)
* Buttons:
Reset (x1)
WPS (x1)
Installation:
Flash factory image through GUI.
This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.
Reverting to factory firmware:
Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.
Signed-off-by: J. Scott Heppler <shep971@centurylink.net>
1361 lines
38 KiB
Makefile
1361 lines
38 KiB
Makefile
#
|
|
# MT7621 Profiles
|
|
#
|
|
|
|
include ./common-tp-link.mk
|
|
|
|
DEFAULT_SOC := mt7621
|
|
|
|
KERNEL_DTB += -d21
|
|
DEVICE_VARS += UIMAGE_MAGIC ELECOM_HWNAME LINKSYS_HWNAME
|
|
|
|
# The OEM webinterface expects an kernel with initramfs which has the uImage
|
|
# header field ih_name.
|
|
# We don't want to set the header name field for the kernel include in the
|
|
# sysupgrade image as well, as this image shouldn't be accepted by the OEM
|
|
# webinterface. It will soft-brick the board.
|
|
define Build/custom-initramfs-uimage
|
|
mkimage -A $(LINUX_KARCH) \
|
|
-O linux -T kernel \
|
|
-C lzma -a $(KERNEL_LOADADDR) $(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC),) \
|
|
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
|
-n '$(1)' -d $@ $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/elecom-wrc-gs-factory
|
|
$(eval product=$(word 1,$(1)))
|
|
$(eval version=$(word 2,$(1)))
|
|
( $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | tr -d '\n' ) >> $@
|
|
( \
|
|
echo -n "ELECOM $(product) v$(version)" | \
|
|
dd bs=32 count=1 conv=sync; \
|
|
dd if=$@; \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
echo -n "MT7621_ELECOM_$(product)" >> $@
|
|
endef
|
|
|
|
define Build/elecom-wrc-factory
|
|
$(eval product=$(word 1,$(1)))
|
|
$(eval version=$(word 2,$(1)))
|
|
$(STAGING_DIR_HOST)/bin/mkhash md5 $@ >> $@
|
|
( \
|
|
echo -n "ELECOM $(product) v$(version)" | \
|
|
dd bs=32 count=1 conv=sync; \
|
|
dd if=$@; \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/iodata-factory
|
|
$(eval fw_size=$(word 1,$(1)))
|
|
$(eval fw_type=$(word 2,$(1)))
|
|
$(eval product=$(word 3,$(1)))
|
|
$(eval factory_bin=$(word 4,$(1)))
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(fw_size)" ]; then \
|
|
$(CP) $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) $(factory_bin); \
|
|
$(STAGING_DIR_HOST)/bin/mksenaofw \
|
|
-r 0x30a -p $(product) -t $(fw_type) \
|
|
-e $(factory_bin) -o $(factory_bin).new; \
|
|
mv $(factory_bin).new $(factory_bin); \
|
|
$(CP) $(factory_bin) $(BIN_DIR)/; \
|
|
else \
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
fi
|
|
endef
|
|
|
|
define Build/iodata-mstc-header
|
|
( \
|
|
data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | gzip -c | \
|
|
tail -c 8 | od -An -tx8 --endian little | tr -d ' \n')"; \
|
|
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
|
|
dd of=$@ bs=8 count=1 seek=7 conv=notrunc 2>/dev/null; \
|
|
)
|
|
dd if=/dev/zero of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null
|
|
( \
|
|
header_crc="$$(dd if=$@ bs=64 count=1 2>/dev/null | gzip -c | \
|
|
tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
|
|
echo -ne "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
|
|
dd of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null; \
|
|
)
|
|
endef
|
|
|
|
define Build/ubnt-erx-factory-image
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
|
|
echo '21001:7' > $(1).compat; \
|
|
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
|
|
\
|
|
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
|
|
mkhash md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
|
|
\
|
|
echo "dummy" > $(1).rootfs; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
|
|
\
|
|
mkhash md5 $(1).rootfs > $(1).md5; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
|
|
\
|
|
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
|
|
$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
|
|
\
|
|
$(CP) $(1) $(BIN_DIR)/; \
|
|
else \
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
fi
|
|
endef
|
|
|
|
define Device/dsa-migration
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
|
|
endef
|
|
|
|
define Device/adslr_g7
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ADSLR
|
|
DEVICE_MODEL := G7
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += adslr_g7
|
|
|
|
define Device/afoundry_ew1200
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := AFOUNDRY
|
|
DEVICE_MODEL := EW1200
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-mt7603 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += ew1200
|
|
endef
|
|
TARGET_DEVICES += afoundry_ew1200
|
|
|
|
define Device/alfa-network_quad-e4g
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := Quad-E4G
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 uboot-envtools \
|
|
-wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += alfa-network_quad-e4g
|
|
|
|
define Device/asiarf_ap7621-001
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := AsiaRF
|
|
DEVICE_MODEL := AP7621-001
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += asiarf_ap7621-001
|
|
|
|
define Device/asiarf_ap7621-nv1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := AsiaRF
|
|
DEVICE_MODEL := AP7621-NV1
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += asiarf_ap7621-nv1
|
|
|
|
define Device/asus_rt-ac57u
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AC57U
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac57u
|
|
|
|
define Device/asus_rt-ac65p
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AC65P
|
|
IMAGE_SIZE := 51200k
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac65p
|
|
|
|
define Device/asus_rt-ac85p
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AC85P
|
|
IMAGE_SIZE := 51200k
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac85p
|
|
|
|
define Device/buffalo_wsr-1166dhp
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
IMAGE_SIZE := 15936k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WSR-1166DHP
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
SUPPORTED_DEVICES += wsr-1166
|
|
endef
|
|
TARGET_DEVICES += buffalo_wsr-1166dhp
|
|
|
|
define Device/buffalo_wsr-2533dhpl
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WSR-2533DHPL
|
|
DEVICE_ALT0_VENDOR := Buffalo
|
|
DEVICE_ALT0_MODEL := WSR-2533DHP
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += buffalo_wsr-2533dhpl
|
|
|
|
define Device/buffalo_wsr-600dhp
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WSR-600DHP
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-rt2800-pci
|
|
SUPPORTED_DEVICES += wsr-600
|
|
endef
|
|
TARGET_DEVICES += buffalo_wsr-600dhp
|
|
|
|
define Device/dlink_dir-8xx-a1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
KERNEL_INITRAMFS := $$(KERNEL) | uimage-padhdr 96
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
|
|
pad-rootfs | append-metadata | check-size
|
|
IMAGE/factory.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
|
|
check-size
|
|
endef
|
|
|
|
define Device/dlink_dir-xx60-a1
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 40960k
|
|
UBINIZE_OPTS := -E 5
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
KERNEL := $$(KERNEL) | uimage-padhdr 96
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
endef
|
|
|
|
define Device/dlink_dir-1960-a1
|
|
$(Device/dlink_dir-xx60-a1)
|
|
DEVICE_MODEL := DIR-1960
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-1960-a1
|
|
|
|
define Device/dlink_dir-2660-a1
|
|
$(Device/dlink_dir-xx60-a1)
|
|
DEVICE_MODEL := DIR-2660
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-2660-a1
|
|
|
|
define Device/dlink_dir-860l-b1
|
|
$(Device/dsa-migration)
|
|
$(Device/seama)
|
|
BLOCKSIZE := 64k
|
|
SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | relocate-kernel | \
|
|
lzma -a0 | uImage lzma
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-860L
|
|
DEVICE_VARIANT := B1
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += dir-860l-b1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-860l-b1
|
|
|
|
define Device/dlink_dir-867-a1
|
|
$(Device/dlink_dir-8xx-a1)
|
|
DEVICE_MODEL := DIR-867
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-867-a1
|
|
|
|
define Device/dlink_dir-878-a1
|
|
$(Device/dlink_dir-8xx-a1)
|
|
DEVICE_MODEL := DIR-878
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-878-a1
|
|
|
|
define Device/dlink_dir-882-a1
|
|
$(Device/dlink_dir-8xx-a1)
|
|
DEVICE_MODEL := DIR-882
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-882-a1
|
|
|
|
define Device/d-team_newifi-d2
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Newifi
|
|
DEVICE_MODEL := D2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += d-team_newifi-d2
|
|
|
|
define Device/d-team_pbr-m1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := PandoraBox
|
|
DEVICE_MODEL := PBR-M1
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += pbr-m1
|
|
endef
|
|
TARGET_DEVICES += d-team_pbr-m1
|
|
|
|
define Device/edimax_ra21s
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := RA21S
|
|
DEVICE_ALT0_VENDOR := Edimax
|
|
DEVICE_ALT0_MODEL := Gemini RA21S
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 02020040 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += edimax_ra21s
|
|
|
|
define Device/edimax_re23s
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 15680k
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := RE23S
|
|
DEVICE_ALT0_VENDOR := Edimax
|
|
DEVICE_ALT0_MODEL := Gemini RE23S
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
append-metadata | check-size
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += edimax_re23s
|
|
|
|
define Device/edimax_rg21s
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := Gemini AC2600 RG21S
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 02020038 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += edimax_rg21s
|
|
|
|
define Device/elecom_wrc-1167ghbk2-s
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 15488k
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-1167GHBK2-S
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elecom-wrc-factory WRC-1167GHBK2-S 0.00
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
|
|
|
|
define Device/elecom_wrc-gs
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := ELECOM
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elecom-wrc-gs-factory $$$$(ELECOM_HWNAME) 0.00
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
|
|
define Device/elecom_wrc-1750gs
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1750GS
|
|
ELECOM_HWNAME := WRC-1750GS
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750gs
|
|
|
|
define Device/elecom_wrc-1750gsv
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1750GSV
|
|
ELECOM_HWNAME := WRC-1750GSV
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750gsv
|
|
|
|
define Device/elecom_wrc-1900gst
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-1900GST
|
|
ELECOM_HWNAME := WRC-1900GST
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1900gst
|
|
|
|
define Device/elecom_wrc-2533gst
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 11264k
|
|
DEVICE_MODEL := WRC-2533GST
|
|
ELECOM_HWNAME := WRC-2533GST
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-2533gst
|
|
|
|
define Device/elecom_wrc-2533gst2
|
|
$(Device/elecom_wrc-gs)
|
|
IMAGE_SIZE := 24576k
|
|
DEVICE_MODEL := WRC-2533GST2
|
|
ELECOM_HWNAME := WRC-2533GST2
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-2533gst2
|
|
|
|
define Device/firefly_firewrt
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Firefly
|
|
DEVICE_MODEL := FireWRT
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += firewrt
|
|
endef
|
|
TARGET_DEVICES += firefly_firewrt
|
|
|
|
define Device/gehua_ghl-r-001
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := GeHua
|
|
DEVICE_MODEL := GHL-R-001
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += gehua_ghl-r-001
|
|
|
|
define Device/gnubee_gb-pc1
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := GnuBee
|
|
DEVICE_MODEL := Personal Cloud One
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
|
|
IMAGE_SIZE := 32448k
|
|
endef
|
|
TARGET_DEVICES += gnubee_gb-pc1
|
|
|
|
define Device/gnubee_gb-pc2
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := GnuBee
|
|
DEVICE_MODEL := Personal Cloud Two
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 -wpad-basic-wolfssl
|
|
IMAGE_SIZE := 32448k
|
|
endef
|
|
TARGET_DEVICES += gnubee_gb-pc2
|
|
|
|
define Device/hiwifi_hc5962
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 32768k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_VENDOR := HiWiFi
|
|
DEVICE_MODEL := HC5962
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc5962
|
|
|
|
define Device/iodata_wn-ax1167gr
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 15552k
|
|
KERNEL_INITRAMFS := $$(KERNEL) | \
|
|
iodata-factory 7864320 4 0x1055 $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AX1167GR
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ax1167gr
|
|
|
|
define Device/iodata_nand
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := I-O DATA
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 51200k
|
|
LOADER_TYPE := bin
|
|
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/iodata_wn-ax1167gr2
|
|
$(Device/iodata_nand)
|
|
UIMAGE_MAGIC := 0x434f4d42
|
|
DEVICE_MODEL := WN-AX1167GR2
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
custom-initramfs-uimage 3.10(XBC.1)b10 | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ax1167gr2
|
|
|
|
define Device/iodata_wn-ax2033gr
|
|
$(Device/iodata_nand)
|
|
UIMAGE_MAGIC := 0x434f4d42
|
|
DEVICE_MODEL := WN-AX2033GR
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
custom-initramfs-uimage 3.10(VST.1)C10 | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ax2033gr
|
|
|
|
define Device/iodata_wn-dx1167r
|
|
$(Device/iodata_nand)
|
|
UIMAGE_MAGIC := 0x434f4d43
|
|
DEVICE_MODEL := WN-DX1167R
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
|
|
custom-initramfs-uimage 3.10(XIK.1)b10 | iodata-mstc-header
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-dx1167r
|
|
|
|
define Device/iodata_wn-gx300gr
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-GX300GR
|
|
DEVICE_PACKAGES := kmod-mt7603
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-gx300gr
|
|
|
|
define Device/iodata_wnpr2600g
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WNPR2600G
|
|
IMAGE_SIZE := 13952k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
|
|
elx-header 0104003a 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += iodata_wnpr2600g
|
|
|
|
define Device/iptime_a6ns-m
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16128k
|
|
UIMAGE_NAME := a6nm
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := A6ns-M
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += iptime_a6ns-m
|
|
|
|
define Device/iptime_a8004t
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16128k
|
|
UIMAGE_NAME := a8004t
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := A8004T
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += iptime_a8004t
|
|
|
|
define Device/jcg_jhr-ac876m
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 89.1
|
|
JCG_MAXSIZE := 16064k
|
|
DEVICE_VENDOR := JCG
|
|
DEVICE_MODEL := JHR-AC876M
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += jcg_jhr-ac876m
|
|
|
|
define Device/lenovo_newifi-d1
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Newifi
|
|
DEVICE_MODEL := D1
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += newifi-d1
|
|
endef
|
|
TARGET_DEVICES += lenovo_newifi-d1
|
|
|
|
define Device/linksys_ea7xxx
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 36864k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware \
|
|
uboot-envtools
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
|
|
endef
|
|
|
|
define Device/linksys_ea7300-v1
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA7300
|
|
DEVICE_VARIANT := v1
|
|
LINKSYS_HWNAME := EA7300
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7300-v1
|
|
|
|
define Device/linksys_ea7300-v2
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA7300
|
|
DEVICE_VARIANT := v2
|
|
LINKSYS_HWNAME := EA7300v2
|
|
DEVICE_PACKAGES += kmod-mt7603
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7300-v2
|
|
|
|
define Device/linksys_ea7500-v2
|
|
$(Device/linksys_ea7xxx)
|
|
DEVICE_MODEL := EA7500
|
|
DEVICE_VARIANT := v2
|
|
LINKSYS_HWNAME := EA7500v2
|
|
endef
|
|
TARGET_DEVICES += linksys_ea7500-v2
|
|
|
|
define Device/linksys_re6500
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := RE6500
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += re6500
|
|
endef
|
|
TARGET_DEVICES += linksys_re6500
|
|
|
|
define Device/mediatek_ap-mt7621a-v60
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Mediatek
|
|
DEVICE_MODEL := AP-MT7621A-V60 EVB
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-sdhci-mt7620 kmod-sound-mt7620 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += mediatek_ap-mt7621a-v60
|
|
|
|
define Device/mediatek_mt7621-eval-board
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 15104k
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7621 EVB
|
|
DEVICE_PACKAGES := -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mt7621
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7621-eval-board
|
|
|
|
define Device/MikroTik
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := MikroTik
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_PACKAGES := kmod-usb3
|
|
LOADER_TYPE := elf
|
|
KERNEL := $(KERNEL_DTB) | loader-kernel
|
|
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
|
|
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | \
|
|
check-size
|
|
endef
|
|
|
|
define Device/mikrotik_routerboard-750gr3
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD 750Gr3
|
|
DEVICE_PACKAGES += -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mikrotik,rb750gr3
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-750gr3
|
|
|
|
define Device/mikrotik_routerboard-760igs
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD 760iGS
|
|
DEVICE_PACKAGES += kmod-sfp -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-760igs
|
|
|
|
define Device/mikrotik_routerboard-m11g
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD M11G
|
|
DEVICE_PACKAGES := -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mikrotik,rbm11g
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-m11g
|
|
|
|
define Device/mikrotik_routerboard-m33g
|
|
$(Device/MikroTik)
|
|
DEVICE_MODEL := RouterBOARD M33G
|
|
DEVICE_PACKAGES := -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += mikrotik,rbm33g
|
|
endef
|
|
TARGET_DEVICES += mikrotik_routerboard-m33g
|
|
|
|
define Device/mqmaker_witi
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := MQmaker
|
|
DEVICE_MODEL := WiTi
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += witi mqmaker,witi-256m mqmaker,witi-512m
|
|
endef
|
|
TARGET_DEVICES += mqmaker_witi
|
|
|
|
define Device/mtc_wr1201
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_VENDOR := MTC
|
|
DEVICE_MODEL := Wireless Router WR1201
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage WR1201_8_128
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += mtc_wr1201
|
|
|
|
define Device/netgear_ex6150
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX6150
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
NETGEAR_BOARD_ID := U12H318T00_NETGEAR
|
|
IMAGE_SIZE := 14848k
|
|
IMAGES += factory.chk
|
|
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size | netgear-chk
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6150
|
|
|
|
define Device/netgear_sercomm_nand
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += factory.img kernel.bin rootfs.bin
|
|
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
|
|
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
|
|
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/kernel.bin := append-kernel
|
|
IMAGE/rootfs.bin := append-ubi | check-size
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
|
|
define Device/netgear_r6220
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6220
|
|
SERCOMM_HWNAME := R6220
|
|
SERCOMM_HWID := AYA
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0086
|
|
IMAGE_SIZE := 28672k
|
|
DEVICE_PACKAGES += kmod-mt76x2
|
|
SUPPORTED_DEVICES += r6220
|
|
endef
|
|
TARGET_DEVICES += netgear_r6220
|
|
|
|
|
|
define Device/netgear_r6260
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6260
|
|
SERCOMM_HWNAME := R6260
|
|
SERCOMM_HWID := CHJ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0052
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6260
|
|
|
|
define Device/netgear_r6350
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6350
|
|
SERCOMM_HWNAME := R6350
|
|
SERCOMM_HWID := CHJ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0052
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6350
|
|
|
|
define Device/netgear_r6700-v2
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6700
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := Nighthawk AC2400
|
|
DEVICE_ALT0_VARIANT := v1
|
|
DEVICE_ALT1_VENDOR := NETGEAR
|
|
DEVICE_ALT1_MODEL := R7200
|
|
DEVICE_ALT1_VARIANT := v1
|
|
SERCOMM_HWNAME := R6950
|
|
SERCOMM_HWID := BZV
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x1032
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6700-v2
|
|
|
|
define Device/netgear_r6800
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6800
|
|
SERCOMM_HWNAME := R6950
|
|
SERCOMM_HWID := BZV
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0062
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6800
|
|
|
|
define Device/netgear_r6850
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := R6850
|
|
SERCOMM_HWNAME := R6850
|
|
SERCOMM_HWID := CHJ
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0052
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_r6850
|
|
|
|
define Device/netgear_wac104
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := WAC104
|
|
SERCOMM_HWNAME := WAC104
|
|
SERCOMM_HWID := CAY
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x0006
|
|
IMAGE_SIZE := 28672k
|
|
DEVICE_PACKAGES += kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += netgear_wac104
|
|
|
|
define Device/netgear_wac124
|
|
$(Device/netgear_sercomm_nand)
|
|
DEVICE_MODEL := WAC124
|
|
SERCOMM_HWNAME := WAC124
|
|
SERCOMM_HWID := CTL
|
|
SERCOMM_HWVER := A003
|
|
SERCOMM_SWVER := 0x0402
|
|
IMAGE_SIZE := 40960k
|
|
DEVICE_PACKAGES += kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += netgear_wac124
|
|
|
|
define Device/netgear_wndr3700-v5
|
|
$(Device/dsa-migration)
|
|
$(Device/netgear_sercomm_nor)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v5
|
|
SERCOMM_HWNAME := WNDR3700v5
|
|
SERCOMM_HWID := AYB
|
|
SERCOMM_HWVER := A001
|
|
SERCOMM_SWVER := 0x1054
|
|
SERCOMM_PAD := 320k
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += wndr3700v5
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700-v5
|
|
|
|
define Device/netis_wf2881
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
FILESYSTEMS := squashfs
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 129280k
|
|
UBINIZE_OPTS := -E 5
|
|
UIMAGE_NAME := WF2881_0.0.00
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2881 | uImage lzma
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_VENDOR := NETIS
|
|
DEVICE_MODEL := WF2881
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += netis_wf2881
|
|
|
|
define Device/phicomm_k2p
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := K2P
|
|
DEVICE_ALT0_VENDOR := Phicomm
|
|
DEVICE_ALT0_MODEL := KE 2P
|
|
SUPPORTED_DEVICES += k2p
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += phicomm_k2p
|
|
|
|
define Device/planex_vr500
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 65216k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := VR500
|
|
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += vr500
|
|
endef
|
|
TARGET_DEVICES += planex_vr500
|
|
|
|
define Device/samknows_whitebox-v8
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := SamKnows
|
|
DEVICE_MODEL := Whitebox 8
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport uboot-envtools
|
|
SUPPORTED_DEVICES += sk-wb8
|
|
endef
|
|
TARGET_DEVICES += samknows_whitebox-v8
|
|
|
|
define Device/storylink_sap-g3200u3
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := STORYLiNK
|
|
DEVICE_MODEL := SAP-G3200U3
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += sap-g3200u3
|
|
endef
|
|
TARGET_DEVICES += storylink_sap-g3200u3
|
|
|
|
define Device/telco-electronics_x1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Telco Electronics
|
|
DEVICE_MODEL := X1
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt76
|
|
endef
|
|
TARGET_DEVICES += telco-electronics_x1
|
|
|
|
define Device/thunder_timecloud
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Thunder
|
|
DEVICE_MODEL := Timecloud
|
|
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += timecloud
|
|
endef
|
|
TARGET_DEVICES += thunder_timecloud
|
|
|
|
define Device/totolink_a7000r
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := C8340R1C-9999
|
|
DEVICE_VENDOR := TOTOLINK
|
|
DEVICE_MODEL := A7000R
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += totolink_a7000r
|
|
|
|
define Device/tplink_re350-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := RE350
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
TPLINK_BOARD_ID := RE350-V1
|
|
IMAGE_SIZE := 6016k
|
|
SUPPORTED_DEVICES += re350-v1
|
|
endef
|
|
TARGET_DEVICES += tplink_re350-v1
|
|
|
|
define Device/tplink_re500-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := RE500
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
TPLINK_BOARD_ID := RE500-V1
|
|
IMAGE_SIZE := 14208k
|
|
endef
|
|
TARGET_DEVICES += tplink_re500-v1
|
|
|
|
define Device/tplink_re650-v1
|
|
$(Device/dsa-migration)
|
|
$(Device/tplink-safeloader)
|
|
DEVICE_MODEL := RE650
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
|
|
TPLINK_BOARD_ID := RE650-V1
|
|
IMAGE_SIZE := 14208k
|
|
endef
|
|
TARGET_DEVICES += tplink_re650-v1
|
|
|
|
define Device/ubnt_edgerouter_common
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
IMAGE_SIZE := 256768k
|
|
FILESYSTEMS := squashfs
|
|
KERNEL_SIZE := 3145728
|
|
KERNEL_INITRAMFS := $$(KERNEL) | \
|
|
ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES += -wpad-basic-wolfssl
|
|
endef
|
|
|
|
define Device/ubnt_edgerouter-x
|
|
$(Device/ubnt_edgerouter_common)
|
|
DEVICE_MODEL := EdgeRouter X
|
|
SUPPORTED_DEVICES += ubnt-erx ubiquiti,edgerouterx
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-x
|
|
|
|
define Device/ubnt_edgerouter-x-sfp
|
|
$(Device/ubnt_edgerouter_common)
|
|
DEVICE_MODEL := EdgeRouter X SFP
|
|
DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x kmod-sfp
|
|
SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-x-sfp
|
|
|
|
define Device/ubnt_unifi-nanohd
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi nanoHD
|
|
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
IMAGE_SIZE := 15552k
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-nanohd
|
|
|
|
define Device/unielec_u7621-06-16m
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := UniElec
|
|
DEVICE_MODEL := U7621-06
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += u7621-06-256M-16M unielec,u7621-06-256m-16m
|
|
endef
|
|
TARGET_DEVICES += unielec_u7621-06-16m
|
|
|
|
define Device/unielec_u7621-06-64m
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 65216k
|
|
DEVICE_VENDOR := UniElec
|
|
DEVICE_MODEL := U7621-06
|
|
DEVICE_VARIANT := 64M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 -wpad-basic-wolfssl
|
|
SUPPORTED_DEVICES += unielec,u7621-06-512m-64m
|
|
endef
|
|
TARGET_DEVICES += unielec_u7621-06-64m
|
|
|
|
define Device/wavlink_wl-wn531a6
|
|
$(Device/dsa-migration)
|
|
DEVICE_VENDOR := Wavlink
|
|
DEVICE_MODEL := WL-WN531A6
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware kmod-usb3
|
|
IMAGE_SIZE := 15040k
|
|
endef
|
|
TARGET_DEVICES += wavlink_wl-wn531a6
|
|
|
|
define Device/wevo_11acnas
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
|
|
DEVICE_VENDOR := WeVO
|
|
DEVICE_MODEL := 11AC NAS Router
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += 11acnas
|
|
endef
|
|
TARGET_DEVICES += wevo_11acnas
|
|
|
|
define Device/wevo_w2914ns-v2
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
UIMAGE_NAME := W2914NS-V2(0.0.0)
|
|
DEVICE_VENDOR := WeVO
|
|
DEVICE_MODEL := W2914NS
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += w2914nsv2
|
|
endef
|
|
TARGET_DEVICES += wevo_w2914ns-v2
|
|
|
|
define Device/winstars_ws-wn583a6
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Winstars
|
|
DEVICE_MODEL := WS-WN583A6
|
|
DEVICE_ALT0_VENDOR := Gemeita
|
|
DEVICE_ALT0_MODEL := AC2100
|
|
KERNEL_INITRAMFS_SUFFIX := -WN583A6$$(KERNEL_SUFFIX)
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware
|
|
endef
|
|
TARGET_DEVICES += winstars_ws-wn583a6
|
|
|
|
define Device/xiaomi-ac2100
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 120320k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += kernel1.bin rootfs0.bin
|
|
IMAGE/kernel1.bin := append-kernel
|
|
IMAGE/rootfs0.bin := append-ubi | check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
|
|
uboot-envtools
|
|
endef
|
|
|
|
define Device/xiaomi_mi-router-ac2100
|
|
$(Device/xiaomi-ac2100)
|
|
DEVICE_MODEL := Mi Router AC2100
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-ac2100
|
|
|
|
define Device/xiaomi_mir3g
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
IMAGE_SIZE := 124416k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += kernel1.bin rootfs0.bin
|
|
IMAGE/kernel1.bin := append-kernel
|
|
IMAGE/rootfs0.bin := append-ubi | check-size
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 3G
|
|
SUPPORTED_DEVICES += R3G
|
|
SUPPORTED_DEVICES += mir3g
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mir3g
|
|
|
|
define Device/xiaomi_mir3g-v2
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 3G
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_ALT0_VENDOR := Xiaomi
|
|
DEVICE_ALT0_MODEL := Mi Router 4A
|
|
DEVICE_ALT0_VARIANT := Gigabit Edition
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mir3g-v2
|
|
|
|
define Device/xiaomi_mir3p
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE:= 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 255488k
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 3 Pro
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
|
check-size
|
|
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mir3p
|
|
|
|
define Device/xiaomi_redmi-router-ac2100
|
|
$(Device/xiaomi-ac2100)
|
|
DEVICE_MODEL := Redmi Router AC2100
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ac2100
|
|
|
|
define Device/xiaoyu_xy-c5
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := XiaoYu
|
|
DEVICE_MODEL := XY-C5
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += xiaoyu_xy-c5
|
|
|
|
define Device/xzwifi_creativebox-v1
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := CreativeBox
|
|
DEVICE_MODEL := v1
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
|
|
kmod-usb3 -wpad-basic-wolfssl
|
|
endef
|
|
TARGET_DEVICES += xzwifi_creativebox-v1
|
|
|
|
define Device/youhua_wr1200js
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := YouHua
|
|
DEVICE_MODEL := WR1200JS
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += youhua_wr1200js
|
|
|
|
define Device/youku_yk-l2
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Youku
|
|
DEVICE_MODEL := YK-L2
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += youku_yk-l2
|
|
|
|
define Device/zbtlink_zbt-we1326
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE1326
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += zbt-we1326
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we1326
|
|
|
|
define Device/zbtlink_zbt-we3526
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE3526
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we3526
|
|
|
|
define Device/zbtlink_zbt-wg2626
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WG2626
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += zbt-wg2626
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wg2626
|
|
|
|
define Device/zbtlink_zbt-wg3526-16m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WG3526
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += zbt-wg3526 zbt-wg3526-16M
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wg3526-16m
|
|
|
|
define Device/zbtlink_zbt-wg3526-32m
|
|
$(Device/dsa-migration)
|
|
$(Device/uimage-lzma-loader)
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WG3526
|
|
DEVICE_VARIANT := 32M
|
|
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
|
|
kmod-usb3 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wg3526-32m
|
|
|
|
define Device/zio_freezio
|
|
$(Device/dsa-migration)
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ZIO
|
|
DEVICE_MODEL := FREEZIO
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += zio_freezio
|
|
|
|
define Device/zyxel_wap6805
|
|
$(Device/dsa-migration)
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := WAP6805
|
|
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma | uimage-padhdr 160
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_wap6805
|