openwrt/target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q.dts
Rosen Penev 74f2df9dbc ath79: mtd-cal-data removals
Replacement can be done with nvmem.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2024-06-09 12:24:15 +02:00

160 lines
2.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "xiaomi,mi-router-4q", "qca,qca9560";
model = "Xiaomi Mi Router 4Q";
aliases {
led-boot = &led_yellow;
led-failsafe = &led_red;
led-running = &led_blue;
led-upgrade = &led_red;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
wps {
label = "WPS/MI button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_red: led_red {
label = "red:led";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
led_yellow: led_yellow {
label = "yellow:led";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
led_blue: led_blue {
label = "blue:led";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x30000>;
read-only;
};
partition@30000 {
label = "nvram";
reg = <0x030000 0x10000>;
read-only;
};
partition@40000 {
label = "boarddata";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "crash";
reg = <0x50000 0x10000>;
read-only;
};
partition@60000 {
label = "art";
reg = <0x60000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
};
};
partition@70000 {
label = "cfg_bak";
reg = <0x70000 0x20000>;
read-only;
};
partition@90000 {
label = "overlay";
reg = <0x90000 0x170000>;
read-only;
};
partition@200000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x200000 0xe00000>;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
nvmem-cells = <&macaddr_art_0 0>;
nvmem-cell-names = "mac-address";
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_art_6>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_art_0 1>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};