mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
a254279a6c
At this moment layerscape images are ext4 only. It causes problem with save changes durring sysupgrade and make "firstboot" and failsafe mode useless. This patch changes sd-card images to squashfs + f2fs combined images. To make place, for saving config, kernel space ar now ext4 partition with fit kernel. This method of image generation is similar to rest of OpenWrt sd-card targets. Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
10 lines
370 B
Plaintext
10 lines
370 B
Plaintext
fdtaddr=0x8f000000
|
|
loadaddr=0x81000000
|
|
fdt_high=0x8fffffff
|
|
initrd_high=0xffffffffffffffff
|
|
hwconfig=fsl_ddr:bank_intlv=auto
|
|
sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
|
|
bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
|
|
bootcmd=echo starting openwrt ...;run sd_boot
|
|
bootdelay=3
|