Andrey Bondar ba59021d64 ath79: add support for 8devices Lima board ... Specification: • 650/600/216 MHz (CPU/DDR/AHB) • 64 MB of RAM (DDR2) • 32 MB of FLASH • 2T2R 2.4 GHz • 2x 10/100 Mbps Ethernet • 1x USB 2.0 Host socket • 1x miniPCIe slot • UART for serial console • 14x GPIO Flash instructions: Upgrading from ar71xx target: • Upload image into the board: scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin root@192.168.1.1/tmp/ • Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin Upgrading from u-boot: • Set up tftp server with openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin • Go to u-boot (reboot and press ESC when prompted) • Set TFTP server IP setenv serverip 192.168.1.254 • Set device ip from the same subnet setenv ipaddr 192.168.1.1 • Copy new firmware to board tftpboot 0x82000000 initramfs.bin • Boot OpenWRT bootm 0x82000000 • Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into the board • Run sysupgrade. Signed-off-by: Andrey Bondar <a.bondar@8devices.com>		2020-07-08 16:07:05 +02:00
..
imagebuilder	imagebuilder: Remove json_info_files/ before build	2020-06-11 11:12:56 +01:00
linux	ath79: add support for 8devices Lima board	2020-07-08 16:07:05 +02:00
sdk	sdk: add OpenWrt branding to menuconfig & .config	2020-05-20 17:03:45 +02:00
toolchain	toolchain: wrapper.sh: harmonize leading whitespaces	2019-12-31 01:36:16 +01:00
Config.in	build: define RTC_SUPPORT as a bool	2020-04-09 12:51:10 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00