mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
dc4eae7a8c
Specification: - SoC: Qualcomm Atheros QCA9563 (775 MHz, MIPS 74Kc) - RAM: 128 MiB - Storage: 16MB NOR flash - Wireless: Built into QCA9563 (Dragonfly), PHY modes b/g/n, 3x3 MIMO - Ethernet: 2x1G Tested and working: - ethernet / switch / lan / wan - 2.4GHz SoC wifi - PCIe - leds - buzzer Ramload: - tftpboot 0x84000000 lede-ar71xx-generic-wpj563-16M-initramfs-uImage.bin - bootm 0x84000000 Install: - tftpboot 0x80500000 lede-ar71xx-generic-wpj563-16M-squashfs-sysupgrade.bin - erase 0x9f030000 +$filesize - erase 0x9f680000 +1 - cp.b $fileaddr 0x9f030000 $filesize Erasing 0x9f680000 is required because uboot defines "bootcmd=bootm 0x9f680000 || bootm 0x9f030000", so it first tries to boot the higher address. I think the 16 mb flash are intended to be used as 8+8mb for a fallback image. In my hardware only the lower address has a bootable image. But to make sure future hardware will boot lede too, I erase one block, so uboot will skip this address. Signed-off-by: Christian Mehlis <christian@m3hlis.de>
151 lines
4.0 KiB
C
151 lines
4.0 KiB
C
/*
|
|
* Compex WPJ563 board support
|
|
*
|
|
* Copyright (c) 2015 Qualcomm Atheros
|
|
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
|
|
#define WPJ563_GPIO_LED_SIG1 1
|
|
#define WPJ563_GPIO_LED_SIG2 5
|
|
#define WPJ563_GPIO_LED_SIG3 6
|
|
#define WPJ563_GPIO_LED_SIG4 7
|
|
#define WPJ563_GPIO_BUZZER 19
|
|
|
|
#define WPJ563_GPIO_BTN_RESET 2
|
|
#define WPJ563_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define WPJ563_KEYS_DEBOUNCE_INTERVAL (3 * WPJ563_KEYS_POLL_INTERVAL)
|
|
|
|
#define WPJ563_MAC0_OFFSET 0x10
|
|
#define WPJ563_MAC1_OFFSET 0x18
|
|
#define WPJ563_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led WPJ563_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "wpj563:green:sig1",
|
|
.gpio = WPJ563_GPIO_LED_SIG1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "wpj563:green:sig2",
|
|
.gpio = WPJ563_GPIO_LED_SIG2,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "wpj563:green:sig3",
|
|
.gpio = WPJ563_GPIO_LED_SIG3,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "wpj563:green:sig4",
|
|
.gpio = WPJ563_GPIO_LED_SIG4,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "wpj563:buzzer",
|
|
.gpio = WPJ563_GPIO_BUZZER,
|
|
.active_low = 0,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button WPJ563_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = WPJ563_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = WPJ563_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct ar8327_pad_cfg WPJ563_ar8337_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data WPJ563_ar8337_data = {
|
|
.pad0_cfg = &WPJ563_ar8337_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info WPJ563_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &WPJ563_ar8337_data,
|
|
},
|
|
};
|
|
|
|
static void __init WPJ563_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(WPJ563_leds_gpio),
|
|
WPJ563_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, WPJ563_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(WPJ563_gpio_keys),
|
|
WPJ563_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
|
|
ath79_register_wmac(art + WPJ563_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
ath79_register_pci();
|
|
|
|
mdiobus_register_board_info(WPJ563_mdio0_info,
|
|
ARRAY_SIZE(WPJ563_mdio0_info));
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ563_MAC0_OFFSET, 0);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ563_MAC1_OFFSET, 0);
|
|
|
|
/* GMAC0 is connected to an QCA8334 switch */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.speed = SPEED_1000;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
|
|
ath79_register_eth(0);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_WPJ563, "WPJ563", "Compex WPJ563", WPJ563_setup);
|