mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
68b5d34f69
Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka <mantas@8devices.com> [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
91 lines
2.3 KiB
C
91 lines
2.3 KiB
C
/*
|
|
* 8devices Rambutan board support
|
|
*
|
|
* Copyright (C) 2017 Mantas Pucka <mantas@8devices.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <linux/platform/ar934x_nfc.h>
|
|
#include <linux/ar8216_platform.h>
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
|
|
static struct at803x_platform_data rambutan_ar8032_data = {
|
|
.has_reset_gpio = 1,
|
|
.reset_gpio = 17,
|
|
};
|
|
|
|
static struct mdio_board_info rambutan_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &rambutan_ar8032_data,
|
|
},
|
|
};
|
|
|
|
static struct at803x_platform_data rambutan_ar8033_data = {
|
|
.has_reset_gpio = 1,
|
|
.reset_gpio = 23,
|
|
};
|
|
|
|
static struct mdio_board_info rambutan_mdio1_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.1",
|
|
.phy_addr = 0,
|
|
.platform_data = &rambutan_ar8033_data,
|
|
},
|
|
};
|
|
|
|
static void __init rambutan_setup(void)
|
|
{
|
|
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
|
ath79_register_nfc();
|
|
ath79_register_usb();
|
|
ath79_register_pci();
|
|
ath79_register_wmac_simple();
|
|
|
|
mdiobus_register_board_info(rambutan_mdio0_info,
|
|
ARRAY_SIZE(rambutan_mdio0_info));
|
|
mdiobus_register_board_info(rambutan_mdio1_info,
|
|
ARRAY_SIZE(rambutan_mdio1_info));
|
|
ath79_register_mdio(0, 0x0);
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_register_eth(0);
|
|
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.phy_mask = BIT(0);
|
|
ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_eth1_pll_data.pll_1000 = 0x17000000;
|
|
ath79_eth1_pll_data.pll_10 = 0x1313;
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board",
|
|
rambutan_setup);
|
|
|