openwrt/target/linux/lantiq/patches-4.4
Hauke Mehrtens bf32177a1d kernel: remove full cache flush in fuse_copy_do() for MIPS
This patch was introduced in commit r16412 for the brcm47xx target only
and then moved to generic in commit r32395. It was initially added
because of ticket #5186 and should fix some problems with fuse file
systems and MIPS caches. The commit comment in r32395 says that this a
generic problem in MIPS CPUs, but does not name any specifics about
that. There was a fix added to kernel 2.6.21 in commit commit
7575a49f20 "[MIPS] Implement flush_anon_page()." that should fix this
problem, but that was already available before both commits were done
to OpenWrt.

I just tested fuse with ntfs.3g without this patch on a BCM4704
(BMIPS3300 V0.6) SoC and haven't seen any problems. Someone reported
that removing this patch improves some fuse operations by 5 times on
some modern MIPS cores.
My test was only a simple "dd if=/dev/zero of=/mnt/zero bs=5000" to an
USB stick.

This patch removes the patch to OpenWrt, because I assume that it is
not needed any more and Felix, the orginal author, also thinks so.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-26 18:22:23 +02:00
..
0001-MIPS-lantiq-add-pcie-driver.patch
0004-MIPS-lantiq-add-atm-hack.patch kernel: remove full cache flush in fuse_copy_do() for MIPS 2016-06-26 18:22:23 +02:00
0007-MIPS-lantiq-add-basic-tffs-driver.patch
0008-MIPS-lantiq-backport-old-timer-code.patch
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0018-MTD-nand-lots-of-xrx200-fixes.patch
0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
0025-NET-MIPS-lantiq-adds-xrx200-net.patch lantiq: add VLAN handling fixes to xrx200 ethernet driver 2016-06-13 17:58:07 +02:00
0026-NET-multi-phy-support.patch
0028-NET-lantiq-various-etop-fixes.patch kernel: update to version 4.4.14 2016-06-26 18:20:37 +02:00
0030-GPIO-add-named-gpio-exports.patch lantiq: refresh patches 2016-06-15 14:36:47 +02:00
0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
0032-USB-fix-roothub-for-IFXHCD.patch
0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch lantiq: refresh patches 2016-06-15 14:36:47 +02:00
0040-USB-DWC2-enable-usb-power-gpio.patch
0041-USB-DWC2-add-ltq-params.patch
0042-arch-mips-increase-io_space_limit.patch lantiq: refresh patches 2016-06-15 14:36:47 +02:00
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch lantiq: refresh patches 2016-06-15 14:36:47 +02:00
0047-poweroff.patch lantiq: remove dummy ltq_machine_power_off to fix gpio-poweroff drivers 2016-06-11 09:49:13 +02:00
0100-spi-add-support-for-Lantiq-SPI-controller.patch
0101-find_active_root.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
0151-lantiq-ifxmips_pcie-use-of.patch
0160-owrt-lantiq-multiple-flash.patch kernel: update to version 4.4.14 2016-06-26 18:20:37 +02:00
0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
0301-xrx200-add-gphy-clk-src-device-tree-binding.patch