mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
3a8d65010d
ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 32 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GST2 normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
42 lines
659 B
Plaintext
42 lines
659 B
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include "mt7621_elecom_wrc-gst.dtsi"
|
|
|
|
/ {
|
|
compatible = "elecom,wrc-1900gst", "mediatek,mt7621-soc";
|
|
model = "ELECOM WRC-1900GST";
|
|
};
|
|
|
|
&partitions {
|
|
partition@50000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x50000 0xb00000>;
|
|
};
|
|
|
|
partition@b50000 {
|
|
label = "tm_pattern";
|
|
reg = <0xb50000 0x380000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@ed0000 {
|
|
label = "tm_key";
|
|
reg = <0xed0000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f50000 {
|
|
label = "art_block";
|
|
reg = <0xf50000 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f80000 {
|
|
label = "user_data";
|
|
reg = <0xf80000 0x80000>;
|
|
read-only;
|
|
};
|
|
};
|