mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
66eb88edb6
The Ubiquiti ToughSwitch 5XP is a 5-port PoE Gigabit switch with a single Fast-Ethernet management port. It supports both 24V passive PoE out on all five ports. Flash: 8 MB RAM: 64 MB SoC: AR7242 Switch: ar8327 USB: 1x USB 2.0 Ethernet: 5x GbE, 1x FE Installation of the firmware is possible either via serial + tftpboot or the factory firmware update function via webinterface. By default the single Fast-Ethernet port labeled "MGMT" is configured as the WAN port. Thus access to the device is only possible via the five switch ports. Serial: 3v3 115200 8n1 The serial header is located in the lower left corner of the switches PCB: ``` | | | | o | o RX | o TX | o GND | | ++ +-++-+ ++ ++ + +--+ ++ +--++--++--+ ``` Signed-off-by: Tobias Schramm <tobleminer@gmail.com> [remove ubnt,sw compatible - fix spelling - wrap commit message - remove superfluous phy-mode property] Signed-off-by: David Bauer <mail@david-bauer.net>
78 lines
1.5 KiB
Plaintext
78 lines
1.5 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/dts-v1/;
|
|
|
|
#include "ar7242_ubnt_sw.dtsi"
|
|
|
|
/ {
|
|
compatible = "ubnt,edgeswitch-5xp", "qca,ar7242";
|
|
model = "Ubiquiti EdgeSwitch 5XP";
|
|
|
|
gpio-export {
|
|
compatible = "gpio-export";
|
|
|
|
poe_24v_port1 {
|
|
gpio-export,name = "ubnt:24v-poe:port1";
|
|
gpio-export,output = <0>;
|
|
gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
poe_24v_port2 {
|
|
gpio-export,name = "ubnt:24v-poe:port2";
|
|
gpio-export,output = <0>;
|
|
gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
poe_24v_port3 {
|
|
gpio-export,name = "ubnt:24v-poe:port3";
|
|
gpio-export,output = <0>;
|
|
gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
poe_24v_port4 {
|
|
gpio-export,name = "ubnt:24v-poe:port4";
|
|
gpio-export,output = <0>;
|
|
gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
poe_24v_port5 {
|
|
gpio-export,name = "ubnt:24v-poe:port5";
|
|
gpio-export,output = <0>;
|
|
gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
phy0: ethernet-switch@0 {
|
|
compatible = "qca,ar8327";
|
|
reg = <0x0>;
|
|
|
|
qca,ar8327-initvals = <
|
|
0x04 0x05100000 /* PORT0 PAD MODE CTRL */
|
|
0x0c 0x05100000 /* PORT6 PAD MODE CTRL */
|
|
0x50 0x40004000 /* LED_CTRL0 */
|
|
0x54 0x40004000 /* LED_CTRL1 */
|
|
0x58 0x40004000 /* LED_CTRL2 */
|
|
0x5c 0x03ffff00 /* LED_CTRL3 */
|
|
0x7c 0x0000007e /* PORT0_STATUS */
|
|
0x94 0x0000007e /* PORT6_STATUS */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii";
|
|
|
|
mtd-mac-address = <&art 0x0>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|