openwrt/package/boot/uboot-envtools/files
INAGAKI Hiroshi 74f15628dd mediatek: add support for Buffalo WSR-2533DHP2
This adds support for the Buffalo WSR-2533DHP2.

The device uses the Broadcom TRX image format with a special magic. To
be able to boot the images or load them they have to be wrapped with
different headers depending how it is loaded.

There are multiple ways to install OpenWrt on this device.
Boot ramdisk from U-Boot
----------------------------
This will load the image and not write it into the flash.

1. Stop boot menu with "space" key
2. Select "System Load Linux to SDRAM via TFTP."
3. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin
4. The system boots the image

Write to flash from U-Boot
-----------------------------
This will load the image over tftp and directly write it into the flash.

1. Stop boot menu with "space" key
2. Select "System Load Linux Kernel then write to Flash via TFTP."
3. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin
4. The system writes this image into the flash and boots into it.

Write to flash from Web UI
-----------------------------
This will load the image over over the Web UI and write it into the flash

1. Open the Web UI
2. Go to "管理" -> "ファームウェア更新"
3. Select "ローカルファイル指定" and click "更新実行"
4. Load this image:
   openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin
5. The system writes this image into the flash and boots into it.

Specifications
-------------------
* SoC:       MT7622 (4x4 2.4 GHz Wifi)
* Wifi:      MT7615 (4x4 5 GHz Wifi)
* Flash:     Winbond W29N01HZ 128MB SLC NAND
* RAM        256MB
* Ethernet:  Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s)

Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-03-15 17:02:17 +01:00
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 2018-11-26 12:05:46 +01:00
ath79 ath79: add support for Senao Engenius EAP1200H 2021-01-23 12:53:22 +01:00
cns3xxx treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
imx6 imx6: use device-tree compatible for board name 2020-07-27 12:10:45 +02:00
ipq40xx uboot-envtools: add support for Aruba AP-303 and AP-365 2021-01-14 01:04:02 +01:00
ipq806x ipq806x: add support for Ubiquiti UniFi AC HD 2021-01-14 01:03:54 +01:00
kirkwood kirkwood: use real model names for Linksys devices 2020-07-31 15:03:43 +02:00
lantiq lantiq: use uniform "u-boot-env" mtd label 2020-09-17 21:09:51 +02:00
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 2018-07-30 10:53:57 +02:00
mediatek mediatek: add support for Buffalo WSR-2533DHP2 2021-03-15 17:02:17 +01:00
mpc85xx mpc85xx: add support for OCEDO Panda 2019-01-26 17:10:19 +01:00
mvebu mvebu: add initial support for Globalscale ESPRESSObin-Ultra 2020-11-23 22:53:15 +01:00
mxs uboot-envtools: mxs: add support for olimex, imx23-olinuxino 2020-03-08 15:10:55 +01:00
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 2019-04-11 19:21:55 +02:00
pistachio pistachio: remove custom board detection override 2017-03-22 11:43:22 +01:00
ramips ramips: add support for ZTE MF283+ 2021-02-26 13:57:54 +01:00
realtek realtek: Add ZyXEL GS1900-8 2021-03-14 15:07:30 +01:00
uboot-envtools.sh uboot-envtools: check for config prior to append 2019-12-17 19:35:16 +02:00