mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
9d38989d1f
Merge most fixes from #8677: - add basic hardware detection of Livebox Blue 5g revisions - register leds and gpio buttons - fix boot address location - properly parse mac addresses Plus some more fixes: - make board_livebox.c more in line with board_bcm963xx.c SVN-Revision: 32087
390 lines
8.8 KiB
Diff
390 lines
8.8 KiB
Diff
--- a/arch/mips/bcm63xx/boards/Kconfig
|
|
+++ b/arch/mips/bcm63xx/boards/Kconfig
|
|
@@ -8,4 +8,10 @@ config BOARD_BCM963XX
|
|
select SSB
|
|
help
|
|
|
|
+config BOARD_LIVEBOX
|
|
+ bool "Inventel Livebox(es) boards"
|
|
+ select SSB
|
|
+ help
|
|
+ Inventel Livebox boards using the RedBoot bootloader.
|
|
+
|
|
endchoice
|
|
--- a/arch/mips/bcm63xx/boards/Makefile
|
|
+++ b/arch/mips/bcm63xx/boards/Makefile
|
|
@@ -1,3 +1,4 @@
|
|
obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
|
|
+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o
|
|
|
|
ccflags-y := -Werror
|
|
--- /dev/null
|
|
+++ b/arch/mips/bcm63xx/boards/board_livebox.c
|
|
@@ -0,0 +1,366 @@
|
|
+/*
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file "COPYING" in the main directory of this archive
|
|
+ * for more details.
|
|
+ *
|
|
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/mtd/mtd.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+#include <linux/ssb/ssb.h>
|
|
+#include <linux/gpio_keys.h>
|
|
+#include <linux/input.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <asm/addrspace.h>
|
|
+#include <bcm63xx_board.h>
|
|
+#include <bcm63xx_cpu.h>
|
|
+#include <bcm63xx_dev_uart.h>
|
|
+#include <bcm63xx_regs.h>
|
|
+#include <bcm63xx_io.h>
|
|
+#include <bcm63xx_dev_pci.h>
|
|
+#include <bcm63xx_dev_enet.h>
|
|
+#include <bcm63xx_dev_dsp.h>
|
|
+#include <bcm63xx_dev_pcmcia.h>
|
|
+#include <bcm63xx_dev_usb_ohci.h>
|
|
+#include <bcm63xx_dev_usb_ehci.h>
|
|
+#include <bcm63xx_dev_spi.h>
|
|
+#include <board_bcm963xx.h>
|
|
+
|
|
+#define PFX "board_livebox: "
|
|
+
|
|
+#define LIVEBOX_KEYS_POLL_INTERVAL 20
|
|
+#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL (LIVEBOX_KEYS_POLL_INTERVAL * 3)
|
|
+
|
|
+static unsigned int mac_addr_used = 0;
|
|
+static struct board_info board;
|
|
+
|
|
+/*
|
|
+ * known 6348 boards
|
|
+ */
|
|
+#ifdef CONFIG_BCM63XX_CPU_6348
|
|
+static struct board_info __initdata board_livebox_blue5g = {
|
|
+ .name = "Livebox-blue-5g",
|
|
+ .expected_cpu_id = 0x6348,
|
|
+
|
|
+ .has_uart0 = 1,
|
|
+ .has_enet0 = 1,
|
|
+ .has_enet1 = 1,
|
|
+ .has_pci = 1,
|
|
+
|
|
+ .enet0 = {
|
|
+ .has_phy = 1,
|
|
+ .use_internal_phy = 1,
|
|
+ },
|
|
+
|
|
+ .enet1 = {
|
|
+ .has_phy = 1,
|
|
+ .phy_id = 31,
|
|
+ },
|
|
+
|
|
+ .has_ohci0 = 1,
|
|
+ .has_pccard = 1,
|
|
+
|
|
+ .has_dsp = 0, /*TODO some Liveboxes have dsp*/
|
|
+ .dsp = {
|
|
+ .gpio_rst = 6, /*FIXME eth1 shares gpio6 with dsp?*/
|
|
+ .gpio_int = 35,
|
|
+ .cs = 2,
|
|
+ .ext_irq = 2,
|
|
+ },
|
|
+
|
|
+ .leds = {
|
|
+ {
|
|
+ .name = "Livebox-blue-5g::adsl-fail",
|
|
+ .gpio = 0,
|
|
+ .active_low = 0,
|
|
+ .default_trigger = "default-on",
|
|
+ },
|
|
+ {
|
|
+ .name = "Livebox-blue-5g::adsl",
|
|
+ .gpio = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "Livebox-blue-5g::traffic",
|
|
+ .gpio = 2,
|
|
+ },
|
|
+ {
|
|
+ .name = "Livebox-blue-5g::phone",
|
|
+ .gpio = 3,
|
|
+ },
|
|
+ {
|
|
+ .name = "Livebox-blue-5g::wifi",
|
|
+ .gpio = 4,
|
|
+ },
|
|
+ },
|
|
+
|
|
+ .buttons = {
|
|
+ {
|
|
+ .desc = "BTN_1",
|
|
+ .gpio = 36,
|
|
+ .active_low = 1,
|
|
+ .type = EV_KEY,
|
|
+ .code = BTN_1,
|
|
+ .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
|
|
+ },
|
|
+ {
|
|
+ .desc = "BTN_2",
|
|
+ .gpio = 7,
|
|
+ .active_low = 1,
|
|
+ .type = EV_KEY,
|
|
+ .code = BTN_2,
|
|
+ .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
|
|
+ },
|
|
+
|
|
+ },
|
|
+};
|
|
+#endif
|
|
+
|
|
+/*
|
|
+ * all boards
|
|
+ */
|
|
+static const struct board_info __initdata *bcm963xx_boards[] = {
|
|
+#ifdef CONFIG_BCM63XX_CPU_6348
|
|
+ &board_livebox_blue5g
|
|
+#endif
|
|
+};
|
|
+/*
|
|
+ * return board name for /proc/cpuinfo
|
|
+ */
|
|
+const char *board_get_name(void)
|
|
+{
|
|
+ return board.name;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * register & return a new board mac address
|
|
+ */
|
|
+static int board_get_mac_address(u8 *mac)
|
|
+{
|
|
+ u8 *p;
|
|
+ int count;
|
|
+
|
|
+ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
|
|
+
|
|
+ p = mac + ETH_ALEN - 1;
|
|
+ count = mac_addr_used;
|
|
+
|
|
+ while (count--) {
|
|
+ do {
|
|
+ (*p)++;
|
|
+ if (*p != 0)
|
|
+ break;
|
|
+ p--;
|
|
+ } while (p != mac);
|
|
+ }
|
|
+
|
|
+ if (p == mac) {
|
|
+ printk(KERN_ERR PFX "unable to fetch mac address\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+ mac_addr_used++;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * early init callback
|
|
+ */
|
|
+#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff
|
|
+#define LIVEBOX_BOOT_ADDR 0x1e400000
|
|
+
|
|
+#define LIVEBOX_HW_BLUE5G_9 0x90
|
|
+
|
|
+void __init board_prom_init(void)
|
|
+{
|
|
+ u32 val;
|
|
+ u8 hw_version;
|
|
+
|
|
+ /* Get hardware version */
|
|
+ val = bcm_gpio_readl(GPIO_CTL_LO_REG);
|
|
+ val &= ~LIVEBOX_GPIO_DETECT_MASK;
|
|
+ bcm_gpio_writel(val, GPIO_CTL_LO_REG);
|
|
+
|
|
+ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
|
|
+ switch (hw_version) {
|
|
+ case LIVEBOX_HW_BLUE5G_9:
|
|
+ printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
|
|
+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
|
|
+ break;
|
|
+ default:
|
|
+ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ /* use default livebox configuration */
|
|
+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
|
|
+
|
|
+ /* setup pin multiplexing depending on board enabled device,
|
|
+ * this has to be done this early since PCI init is done
|
|
+ * inside arch_initcall */
|
|
+ val = 0;
|
|
+
|
|
+#ifdef CONFIG_PCI
|
|
+ if (board.has_pci) {
|
|
+ if (BCMCPU_IS_6348())
|
|
+ val |= GPIO_MODE_6348_G2_PCI;
|
|
+ }
|
|
+#endif
|
|
+ if (board.has_pccard) {
|
|
+ if (BCMCPU_IS_6348())
|
|
+ val |= GPIO_MODE_6348_G1_MII_PCCARD;
|
|
+ }
|
|
+
|
|
+ if (board.has_enet0 && !board.enet0.use_internal_phy) {
|
|
+ if (BCMCPU_IS_6348())
|
|
+ val |= GPIO_MODE_6348_G3_EXT_MII |
|
|
+ GPIO_MODE_6348_G0_EXT_MII;
|
|
+ }
|
|
+
|
|
+ if (board.has_enet1 && !board.enet1.use_internal_phy) {
|
|
+ if (BCMCPU_IS_6348())
|
|
+ val |= GPIO_MODE_6348_G3_EXT_MII |
|
|
+ GPIO_MODE_6348_G0_EXT_MII;
|
|
+ printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
|
|
+ gpio_request(6, "dsp_eth_rst");
|
|
+ gpio_direction_output(6, 0);
|
|
+ gpio_set_value(6, 1);
|
|
+ }
|
|
+
|
|
+ bcm_gpio_writel(val, GPIO_MODE_REG);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * second stage init callback, good time to panic if we couldn't
|
|
+ * identify on which board we're running since early printk is working
|
|
+ */
|
|
+void __init board_setup(void)
|
|
+{
|
|
+ if (!board.name[0])
|
|
+ panic("unable to detect bcm963xx board");
|
|
+ printk(KERN_INFO PFX "board name: %s\n", board.name);
|
|
+
|
|
+ /* make sure we're running on expected cpu */
|
|
+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
|
|
+ panic("unexpected CPU for bcm963xx board");
|
|
+}
|
|
+
|
|
+static struct resource mtd_resources[] = {
|
|
+ {
|
|
+ .start = 0, /* filled at runtime */
|
|
+ .end = 0, /* filled at runtime */
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device mtd_dev = {
|
|
+ .name = "bcm963xx-flash",
|
|
+ .resource = mtd_resources,
|
|
+ .num_resources = ARRAY_SIZE(mtd_resources),
|
|
+};
|
|
+
|
|
+static struct gpio_led_platform_data bcm63xx_led_data;
|
|
+
|
|
+static struct platform_device bcm63xx_gpio_leds = {
|
|
+ .name = "leds-gpio",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &bcm63xx_led_data,
|
|
+};
|
|
+
|
|
+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
|
|
+ .poll_interval = LIVEBOX_KEYS_POLL_INTERVAL,
|
|
+};
|
|
+
|
|
+static struct platform_device bcm63xx_gpio_keys_device = {
|
|
+ .name = "gpio-keys-polled",
|
|
+ .id = 0,
|
|
+ .dev.platform_data = &bcm63xx_gpio_keys_data,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * third stage init callback, register all board devices.
|
|
+ */
|
|
+int __init board_register_devices(void)
|
|
+{
|
|
+ u32 val;
|
|
+ int led_count = 0;
|
|
+ int button_count = 0;
|
|
+
|
|
+ if (board.has_uart0)
|
|
+ bcm63xx_uart_register(0);
|
|
+
|
|
+ if (board.has_uart1)
|
|
+ bcm63xx_uart_register(1);
|
|
+
|
|
+ if (board.has_pccard)
|
|
+ bcm63xx_pcmcia_register();
|
|
+
|
|
+ if (board.has_enet0 &&
|
|
+ !board_get_mac_address(board.enet0.mac_addr))
|
|
+ bcm63xx_enet_register(0, &board.enet0);
|
|
+
|
|
+ if (board.has_enet1 &&
|
|
+ !board_get_mac_address(board.enet1.mac_addr))
|
|
+ bcm63xx_enet_register(1, &board.enet1);
|
|
+
|
|
+ if (board.has_ehci0)
|
|
+ bcm63xx_ehci_register();
|
|
+
|
|
+ if (board.has_ohci0)
|
|
+ bcm63xx_ohci_register();
|
|
+
|
|
+ if (board.has_dsp)
|
|
+ bcm63xx_dsp_register(&board.dsp);
|
|
+
|
|
+ bcm63xx_spi_register();
|
|
+
|
|
+ if (board.num_devs)
|
|
+ platform_add_devices(board.devs, board.num_devs);
|
|
+
|
|
+ if (board.num_spis)
|
|
+ spi_register_board_info(board.spis, board.num_spis);
|
|
+
|
|
+
|
|
+ /* read base address of boot chip select (0) */
|
|
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
|
|
+ val &= MPI_CSBASE_BASE_MASK;
|
|
+ if (val != LIVEBOX_BOOT_ADDR)
|
|
+ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
|
|
+ val, LIVEBOX_BOOT_ADDR);
|
|
+ mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
|
|
+ mtd_resources[0].end = 0x1ebfffff;
|
|
+
|
|
+ platform_device_register(&mtd_dev);
|
|
+
|
|
+ /* count number of LEDs defined by this device */
|
|
+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
|
|
+ led_count++;
|
|
+
|
|
+ bcm63xx_led_data.num_leds = led_count;
|
|
+ bcm63xx_led_data.leds = board.leds;
|
|
+
|
|
+ platform_device_register(&bcm63xx_gpio_leds);
|
|
+
|
|
+ /* count number of BUTTONs defined by this device */
|
|
+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
|
|
+ button_count++;
|
|
+
|
|
+ if (button_count) {
|
|
+ bcm63xx_gpio_keys_data.nbuttons = button_count;
|
|
+ bcm63xx_gpio_keys_data.buttons = board.buttons;
|
|
+
|
|
+ platform_device_register(&bcm63xx_gpio_keys_device);
|
|
+ }
|
|
+
|
|
+#ifdef CONFIG_PCI
|
|
+ if (board.has_pci)
|
|
+ bcm63xx_pci_register();
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|