openwrt/target/linux/brcm63xx/dts/nb4-ser-r0.dts
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00

101 lines
1.8 KiB
Plaintext

/dts-v1/;
/include/ "bcm6358.dtsi"
/ {
model = "SFR Neuf Box 4 (Sercomm)";
compatible = "sfr,nb4-ser-r0", "brcm,bcm6358";
/*
spi-gpio {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-gpio";
gpio-mosi = <&gpio0 7 0>;
gpio-sck = <&gpio0 6 0>;
num-chipselects = <0>;
hc595: gpio-spi-controller@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
};
};
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
service {
label = "service";
gpios = <&gpio0 27 1>;
linux,code = <0x100>;
};
clip {
label = "clip";
gpios = <&gpio0 31 1>;
linux,code = <0x101>;
};
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 5 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
traffic_white {
label = "NB4-SER-r0:white:traffic";
gpios = <&gpio0 2 1>;
};
service_blue {
label = "NB4-SER-r0:blue:service";
gpios = <&gpio0 4 1>;
};
wifi_white {
label = "NB4-SER-r0:white:wifi";
gpios = <&gpio0 15 1>;
};
service_red {
label = "NB4-SER-r0:red:service";
gpios = <&gpio0 29 1>;
};
service_green {
label = "NB4-SER-r0:green:service";
gpios = <&gpio0 30 1>;
};
/*
alarm_white {
label = "NB4-SER-r0:white:alarm";
gpios = <&hc595 0 1>;
};
tv_white {
label = "NB4-SER-r0:white:tv";
gpios = <&hc595 2 1>;
};
tel_white {
label = "NB4-SER-r0:white:tel";
gpios = <&hc595 3 1>;
};
adsl_white {
label = "NB4-SER-r0:white:adsl";
gpios = <&hc595 4 1>;
};
*/
};
};