openwrt/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts
Adrian Schmutzler f4940d2229 ramips: use standard naming scheme for Zyxel NR7101 LED nodes
Make naming and DT label consistent with other devices at this
target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-10 14:41:06 +02:00

165 lines
2.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,nr7101", "mediatek,mt7621-soc";
model = "ZyXEL NR7101";
aliases {
led-boot = &led_system_green;
led-failsafe = &led_system_green;
led-running = &led_system_green;
led-upgrade = &led_system_green;
label-mac-device = &gmac0;
};
leds {
compatible = "gpio-leds";
system_yellow {
label = "yellow:system";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
led_system_green: system_green {
label = "green:system";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
system_red {
label = "red:system";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wlan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WLAN>;
};
reset {
label = "reset";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio {
lte_pwrkey {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "lte-pwrkey";
};
lte_power {
gpio-hog;
gpios = <18 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "lte-power";
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "Config";
reg = <0x80000 0x80000>;
};
factory: partition@100000 {
label = "Factory";
reg = <0x100000 0x40000>;
read-only;
};
partition@140000 {
label = "Kernel";
reg = <0x140000 0x1ec0000>;
};
partition@540000 {
label = "ubi";
reg = <0x540000 0x1ac0000>;
};
partition@2140000 {
label = "Kernel2";
reg = <0x2140000 0x1ec0000>;
};
partition@4000000 {
label = "wwan";
reg = <0x4000000 0x100000>;
};
partition@4100000 {
label = "data";
reg = <0x4100000 0x1000000>;
};
partition@5100000 {
label = "rom-d";
reg = <0x5100000 0x100000>;
read-only;
};
partition@5200000 {
label = "reserve";
reg = <0x5200000 0x80000>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
};
};
&gmac0 {
mtd-mac-address = <&factory 0xe000>;
};
&switch0 {
ports {
port@2 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "i2c", "rgmii2", "uart3", "jtag", "wdt";
function = "gpio";
};
};