ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-19 19:27:27 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
b7ec6659a1
openwrt/target/linux
History
Sungbo Eo b7ec6659a1 ramips: add support for ipTIME A3 
ipTIME A3 is a 2.4/5GHz band AC1200 router, based on MediaTek
MT7628AN.

Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
  - 2.4GHz: SoC internal
  - 5GHz: MT7612EN
- Ethernet: 3x 10/100Mbps
  - Switch: SoC internal
- UART:
  - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2019-09-25 14:44:36 +08:00
..
apm821xx apm821xx: remove unnecessary kernel padding 2019-09-21 23:41:31 +02:00
ar7 kernel: bump 4.9 to 4.9.194 2019-09-24 12:52:05 +02:00
ar71xx kernel: bump 4.14 to 4.14.145 2019-09-20 15:51:49 +02:00
arc770 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
archs38 treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
armvirt armvirt: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
at91 at91:sam9x: create sdcard images 2019-09-21 01:09:27 +02:00
ath25 treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-11 09:05:35 +02:00
ath79 kernel: bump 4.19 to 4.19.75 2019-09-24 12:52:05 +02:00
bcm53xx bcm53xx: sysupgrade: support Luxul firmware format 2019-09-16 16:01:42 +02:00
brcm47xx brcm47xx: sysupgrade: support Luxul firmware format 2019-09-16 21:37:33 +02:00
brcm63xx kernel: bump 4.14 to 4.14.145 2019-09-20 15:51:49 +02:00
brcm2708 kernel: bump 4.19 to 4.19.74 2019-09-20 15:51:49 +02:00
cns3xxx treewide: sysupgrade: don't use $ARGV in platform_do_upgrade() 2019-07-17 08:05:38 +02:00
gemini kernel: bump 4.19 to 4.19.73 2019-09-20 13:16:17 +02:00
generic kernel: bump 4.19 to 4.19.75 2019-09-24 12:52:05 +02:00
imx6 imx6: install-dtb as separate IMAGE 2019-09-15 15:00:17 +00:00
ipq40xx ipq40xx: fix hw-crypto detection of qce driver 2019-09-21 23:41:31 +02:00
ipq806x ipq806x: provide label MAC address 2019-09-19 23:43:27 +02:00
ixp4xx treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup 2019-09-11 09:05:35 +02:00
kirkwood treewide: sync bootcount scripts across targets 2019-08-17 23:52:34 +08:00
lantiq lantiq-dsl: fix value of FECS counter 2019-09-19 23:43:27 +02:00
layerscape kernel: bump 4.14 to 4.14.145 2019-09-20 15:51:49 +02:00
malta malta: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
mediatek kernel: bump 4.14 to 4.14.145 2019-09-20 15:51:49 +02:00
mpc85xx mpc85xx: provide label MAC address 2019-09-19 23:43:27 +02:00
mvebu treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
mxs mxs: disable unused serial drivers 2019-03-11 19:35:43 +01:00
octeon treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
octeontx kernel: Remove CONFIG_COMPAT 2019-05-11 17:15:41 +02:00
omap treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
orion orion: sysupgrade: change platform_check_image() args validation 2019-07-16 13:58:26 +02:00
oxnas oxnas: convert DEVICE_TITLE to new variables 2019-07-10 16:56:16 +02:00
pistachio treewide: sysupgrade: get rid of platform_nand_pre_upgrade() 2019-07-22 14:27:37 +02:00
ramips ramips: add support for ipTIME A3 2019-09-25 14:44:36 +08:00
rb532 treewide: sysupgrade: get rid of platform_nand_pre_upgrade() 2019-07-22 14:27:37 +02:00
samsung samsung: split up DEVICE_TITLE 2019-09-11 15:17:09 +02:00
sunxi sunxi: Add support for Banana Pi M2 Ultra 2019-09-21 01:12:35 +02:00
tegra treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
uml kernel: Deactivate CONFIG_BINFMT_MISC 2019-05-11 17:15:41 +02:00
x86 treewide: use new procd sysupgrade $UPGRADE_BACKUP variable 2019-09-05 23:33:19 +02:00
zynq zynq: remove kernel 4.14 support 2019-08-17 16:57:32 +02:00
Makefile