openwrt/target/linux/lantiq/dts/amazonse.dtsi
Martin Blumenstingl 4995c64857 lantiq: specify console using stdout-path instead of cmdline argument
Use devicetree's /chosen/stdout-path instead of the kernel command line
(embedded in the .dts-files) to specify the serial console. Using the
chosen node is recommended on devicetree based platforms.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-12 09:57:40 +01:00

161 lines
3.0 KiB
Plaintext

#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,ase";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips4Kc";
};
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <29 30 31>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
spi@E100800 {
compatible = "lantiq,ase-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <24 25 26>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
#address-cells = <1>;
#size-cells = <1>;
};
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <97 98 99 100 101 102>;
status = "disabled";
};
gpio: pinmux@E100B10 {
compatible = "lantiq,ase-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
};
asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <72 74 75>;
};
mei@E116000 {
compatible = "lantiq,mei-xway";
interrupt-parent = <&icu0>;
interrupts = <63>;
};
ifxhcd@E101000 {
compatible = "lantiq,ifxhcd-ase";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <39>;
status = "disabled";
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
ppe@E234000 {
compatible = "lantiq,ppe-ase";
interrupt-parent = <&icu0>;
interrupts = <85>;
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <105 109>;
};
};
adsl {
compatible = "lantiq,adsl-ase";
};
};