openwrt/target/linux/ath79/dts/ar9344_alfa-network_n5q.dts
Piotr Dymacz 53ac6ee552 ath79: utilize ath9k 'nvmem-cells' on ALFA Network boards
Drop custom 'mtd-cal-data' and switch to 'nvmem-cells' based solution
for fetching radio calibration data and its MAC address.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2022-02-27 15:09:36 +01:00

175 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ALFA Network N5Q";
compatible = "alfa-network,n5q", "qca,ar9344";
aliases {
label-mac-device = &wmac;
led-boot = &led_signal4;
led-failsafe = &led_signal4;
led-upgrade = &led_signal4;
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
watchdog-enable {
gpio-export,name = "watchdog-enable";
gpio-export,output = <1>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
lan1 {
label = "green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "green:lan2";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
led_signal4: signal4 {
label = "green:signal4";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
signal1 {
label = "red:signal1";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
signal2 {
label = "orange:signal2";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
signal3 {
label = "green:signal3";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wlan {
label = "green:wlan";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
hw_algo = "toggle";
hw_margin_ms = <25000>;
always-running;
};
};
&eth0 {
status = "okay";
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
phy-handle = <&swphy4>;
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_art_6>;
nvmem-cell-names = "mac-address";
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x060000>;
read-only;
};
partition@60000 {
label = "u-boot-env";
reg = <0x060000 0x010000>;
};
partition@70000 {
label = "art";
reg = <0x070000 0x010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: cal@1000 {
reg = <0x1000 0x440>;
};
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
macaddr_art_1002: macaddr@1002 {
reg = <0x1002 0x6>;
};
};
partition@80000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x080000 0xf80000>;
};
};
};
};
&wmac {
status = "okay";
nvmem-cells = <&cal_art_1000>, <&macaddr_art_1002>;
nvmem-cell-names = "calibration", "mac-address";
};