mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
f932137385
- remove stray #address-cells / #size-cells - fix partition unit-addresses in wd-mybooklive.dts - remove index from MBL's gpio node name Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
491 lines
13 KiB
Plaintext
491 lines
13 KiB
Plaintext
/*
|
|
* Device Tree for Bluestone (APM821xx) board.
|
|
*
|
|
* Copyright (c) 2010, Applied Micro Circuits Corporation
|
|
* Author: Tirumala R Marri <tmarri@apm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/dma/dw-dmac.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
dcr-parent = <&{/cpus/cpu@0}>;
|
|
compatible = "apm,bluestone";
|
|
|
|
aliases {
|
|
ethernet0 = &EMAC0; /* needed for BSP u-boot */
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
CPU00: cpu@0 {
|
|
device_type = "cpu";
|
|
model = "PowerPC,apm82181";
|
|
reg = <0x00000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
timebase-frequency = <0>; /* Filled in by U-Boot */
|
|
i-cache-line-size = <32>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-size = <32768>;
|
|
d-cache-size = <32768>;
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
next-level-cache = <&L2C0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
|
|
};
|
|
|
|
UIC0: interrupt-controller0 {
|
|
compatible = "apm,uic-apm82181", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0x0c0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
UIC1: interrupt-controller1 {
|
|
compatible = "apm,uic-apm82181", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <1>;
|
|
dcr-reg = <0x0d0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x1e IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x1f IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC2: interrupt-controller2 {
|
|
compatible = "apm,uic-apm82181", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <2>;
|
|
dcr-reg = <0x0e0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x0a IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x0b IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC3: interrupt-controller3 {
|
|
compatible = "apm,uic-apm82181","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <3>;
|
|
dcr-reg = <0x0f0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x11 IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
OCM1: ocm@400040000 {
|
|
compatible = "apm,ocm-apm82181", "ibm,ocm";
|
|
status = "okay";
|
|
cell-index = <1>;
|
|
/* configured in U-Boot */
|
|
reg = <4 0x00040000 0x8000>; /* 32K */
|
|
};
|
|
|
|
SDR0: sdr {
|
|
compatible = "apm,sdr-apm82181", "ibm,sdr-460ex";
|
|
dcr-reg = <0x00e 0x002>;
|
|
};
|
|
|
|
CPR0: cpr {
|
|
compatible = "apm,cpr-apm82181", "ibm,cpr-460ex";
|
|
dcr-reg = <0x00c 0x002>;
|
|
};
|
|
|
|
L2C0: l2c {
|
|
compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
|
|
dcr-reg = <0x020 0x008
|
|
0x030 0x008>;
|
|
cache-line-size = <32>;
|
|
cache-size = <262144>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x0b IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
CPM0: cpm {
|
|
compatible = "ibm,cpm-apm821xx", "ibm,cpm";
|
|
cell-index = <0>;
|
|
dcr-reg = <0x160 0x003>;
|
|
pm-cpu = <0x02000000>;
|
|
pm-doze = <0x302570F0>;
|
|
pm-nap = <0x302570F0>;
|
|
pm-deepsleep = <0x302570F0>;
|
|
pm-iic-device = <&IIC0>;
|
|
pm-emac-device = <&EMAC0>;
|
|
unused-units = <0x00000100>;
|
|
idle-doze = <0x02000000>;
|
|
standby = <0xfeff791d>;
|
|
};
|
|
|
|
plb {
|
|
compatible = "apm,plb-apm82181", "ibm,plb-460ex", "ibm,plb4";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges; /* Filled in by U-Boot */
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
SDRAM0: sdram {
|
|
compatible = "apm,sdram-apm82181", "ibm,sdram-460ex", "ibm,sdram-405gp";
|
|
dcr-reg = <0x010 0x002>;
|
|
};
|
|
|
|
RTC: rtc {
|
|
compatible = "ibm,rtc";
|
|
dcr-reg = <0x240 0x009>;
|
|
interrupts = <0x1a IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&UIC2>;
|
|
|
|
};
|
|
|
|
TRNG: trng@110000 {
|
|
compatible = "amcc,ppc460ex-rng", "ppc4xx-rng", "amcc, ppc4xx-trng";
|
|
reg = <4 0x00110000 0x100>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x03 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
PKA: pka@114000 {
|
|
compatible = "ppc4xx-pka", "amcc,ppc4xx-pka", "amcc, ppc4xx-pka";
|
|
reg = <4 0x00114000 0x4000>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x14 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CRYPTO: crypto@180000 {
|
|
compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
|
|
reg = <4 0x00180000 0x80400>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x1d IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled"; /* hardware option */
|
|
};
|
|
|
|
MAL0: mcmal {
|
|
compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
|
|
descriptor-memory = "ocm";
|
|
dcr-reg = <0x180 0x062>;
|
|
num-tx-chans = <1>;
|
|
num-rx-chans = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&UIC2>;
|
|
interrupts = <0x06 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x07 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x03 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x04 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x05 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x08 IRQ_TYPE_EDGE_FALLING>,
|
|
<0x09 IRQ_TYPE_EDGE_FALLING>,
|
|
<0x0c IRQ_TYPE_EDGE_FALLING>,
|
|
<0x0d IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-names = "txeob", "rxeob", "serr",
|
|
"txde", "rxde",
|
|
"tx0coal", "tx1coal",
|
|
"rx0coal", "rx1coal";
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb-460ex", "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc-460ex", "ibm,ebc";
|
|
dcr-reg = <0x012 0x002>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
/* ranges property is supplied by U-Boot */
|
|
ranges = <0x00000003 0x00000000 0xe0000000 0x8000000>;
|
|
interrupts = <0x06 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&UIC1>;
|
|
|
|
nor_flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
bank-width = <1>;
|
|
reg = <0x00000000 0x00000000 0x00100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ndfc@1,0 {
|
|
compatible = "ibm,ndfc";
|
|
reg = <00000003 00000000 00002000>;
|
|
ccr = <0x00001000>;
|
|
bank-settings = <0x80002222>;
|
|
status = "disabled";
|
|
|
|
nand {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
UART0: serial@ef600300 {
|
|
/*
|
|
* AMCC's BSP u-boot scans for the "ns16550"
|
|
* compatible, without it, u-boot wouldn't
|
|
* set the required "clock-frequency".
|
|
*
|
|
* The hardware documentation states:
|
|
* "Register compatibility with 16750 register set"
|
|
*/
|
|
compatible = "ns16750", "ns16550";
|
|
reg = <0xef600300 0x00000008>;
|
|
virtual-reg = <0xef600300>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x01 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
UART1: serial@ef600400 {
|
|
/* same "ns16750" as with UART0 */
|
|
compatible = "ns16750", "ns16550";
|
|
reg = <0xef600400 0x00000008>;
|
|
virtual-reg = <0xef600400>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x01 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
IIC0: i2c@ef600700 {
|
|
compatible = "ibm,iic-460ex", "ibm,iic";
|
|
reg = <0xef600700 0x00000014>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x02 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
IIC1: i2c@ef600800 {
|
|
compatible = "ibm,iic-460ex", "ibm,iic";
|
|
reg = <0xef600800 0x00000014>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x03 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
GPIO0: gpio@ef600b00 {
|
|
compatible = "ibm,ppc4xx-gpio";
|
|
reg = <0xef600b00 0x00000048>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
status = "disabled";
|
|
};
|
|
|
|
EMAC0: ethernet@ef600c00 {
|
|
device_type = "network";
|
|
compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
|
|
interrupt-parent = <&EMAC0>;
|
|
interrupts = <0 1>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH>,
|
|
<1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "status", "wake";
|
|
|
|
reg = <0xef600c00 0x000000c4>;
|
|
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <0>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <9000>;
|
|
rx-fifo-size = <16384>;
|
|
tx-fifo-size = <2048>;
|
|
phy-mode = "rgmii";
|
|
phy-map = <0x00000000>;
|
|
rgmii-device = <&RGMII0>;
|
|
rgmii-channel = <0>;
|
|
tah-device = <&TAH0>;
|
|
tah-channel = <0>;
|
|
has-inverted-stacr-oc;
|
|
has-new-stacr-staopc;
|
|
status = "disabled";
|
|
};
|
|
|
|
TAH0: emac-tah@ef601350 {
|
|
compatible = "ibm,tah-460ex", "ibm,tah";
|
|
reg = <0xef601350 0x00000030>;
|
|
};
|
|
|
|
RGMII0: emac-rgmii@ef601500 {
|
|
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
|
|
reg = <0xef601500 0x00000008>;
|
|
has-mdio;
|
|
};
|
|
};
|
|
|
|
USBOTG0: usbotg@bff80000 {
|
|
compatible = "amcc,dwc-otg";
|
|
reg = <4 0xbff80000 0x10000>;
|
|
interrupt-parent = <&USBOTG0>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = <0 &UIC2 0x1c IRQ_TYPE_LEVEL_HIGH>,
|
|
<1 &UIC1 0x1a IRQ_TYPE_LEVEL_LOW>,
|
|
<2 &UIC0 0x0c IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "usb-otg", "high-power", "dma";
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
AHBDMA0: dma@bffd0800 {
|
|
compatible = "snps,dma-spear1340";
|
|
reg = <4 0xbffd0800 0x400>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x19 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <3>;
|
|
|
|
dma-channels = <2>;
|
|
dma-masters = <3>;
|
|
block_size = <4095>;
|
|
data-width = <4>, <4>, <4>;
|
|
multi-block = <1>, <1>;
|
|
|
|
chan_allocation_order = <1>;
|
|
chan_priority = <1>;
|
|
|
|
snps,dma-protection-control =
|
|
<(DW_DMAC_HPROT1_PRIVILEGED_MODE |
|
|
DW_DMAC_HPROT2_BUFFERABLE)>;
|
|
is_memcpy;
|
|
};
|
|
|
|
SATA0: sata@bffd1000 {
|
|
compatible = "amcc,sata-460ex";
|
|
reg = <4 0xbffd1000 0x800>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x1a IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&AHBDMA0 0 0 1>;
|
|
dma-names = "sata-dma";
|
|
status = "disabled";
|
|
};
|
|
|
|
SATA1: sata@bffd1800 {
|
|
compatible = "amcc,sata-460ex";
|
|
reg = <4 0xbffd1800 0x800>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x1b IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&AHBDMA0 1 0 2>;
|
|
dma-names = "sata-dma";
|
|
status = "disabled";
|
|
};
|
|
|
|
MSI: ppc4xx-msi@c10000000 {
|
|
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
|
|
reg = <0xc 0x10000000 0x100
|
|
0xc 0x10000000 0x100>;
|
|
sdr-base = <0x36C>;
|
|
msi-data = <0x00004440>;
|
|
msi-mask = <0x0000ffe0>;
|
|
interrupts =<0 1 2 3 4 5 6 7>;
|
|
interrupt-parent = <&MSI>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
msi-available-ranges = <0x0 0x100>;
|
|
interrupt-map =
|
|
<0 &UIC3 0x18 IRQ_TYPE_EDGE_RISING>,
|
|
<1 &UIC3 0x19 IRQ_TYPE_EDGE_RISING>,
|
|
<2 &UIC3 0x1a IRQ_TYPE_EDGE_RISING>,
|
|
<3 &UIC3 0x1b IRQ_TYPE_EDGE_RISING>,
|
|
<4 &UIC3 0x1c IRQ_TYPE_EDGE_RISING>,
|
|
<5 &UIC3 0x1d IRQ_TYPE_EDGE_RISING>,
|
|
<6 &UIC3 0x1e IRQ_TYPE_EDGE_RISING>,
|
|
<7 &UIC3 0x1f IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
PCIE0: pciex@d00000000 {
|
|
device_type = "pci"; /* see ppc4xx_pci_find_bridge */
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
|
|
primary;
|
|
port = <0x0>; /* port number */
|
|
reg = <0x0000000d 0x00000000 0x20000000>, /* Config space access */
|
|
<0x0000000c 0x08010000 0x00001000>; /* Registers */
|
|
dcr-reg = <0x100 0x020>;
|
|
sdr-base = <0x300>;
|
|
|
|
/* Outbound ranges, one memory and one IO,
|
|
* later cannot be changed
|
|
*/
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000>,
|
|
<0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000>,
|
|
<0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
|
|
|
|
/* Inbound 2GB range starting at 0 */
|
|
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
|
|
|
/* This drives busses 0x40 to 0x7f */
|
|
bus-range = <0x40 0x7f>;
|
|
|
|
/* Legacy interrupts (note the weird polarity, the bridge seems
|
|
* to invert PCIe legacy interrupts).
|
|
* We are de-swizzling here because the numbers are actually for
|
|
* port of the root complex virtual P2P bridge. But I want
|
|
* to avoid putting a node for it in the tree, so the numbers
|
|
* below are basically de-swizzled numbers.
|
|
* The real slot is on idsel 0, so the swizzling is 1:1
|
|
*/
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map =
|
|
<0x0 0x0 0x0 0x1 &UIC3 0x0c IRQ_TYPE_LEVEL_HIGH>, /* swizzled int A */
|
|
<0x0 0x0 0x0 0x2 &UIC3 0x0d IRQ_TYPE_LEVEL_HIGH>, /* swizzled int B */
|
|
<0x0 0x0 0x0 0x3 &UIC3 0x0e IRQ_TYPE_LEVEL_HIGH>, /* swizzled int C */
|
|
<0x0 0x0 0x0 0x4 &UIC3 0x0f IRQ_TYPE_LEVEL_HIGH>; /* swizzled int D */
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|