mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
73832e1a48
Hardware specification:
SoC: MediaTek MT7986A 4x A53
Flash: ESMT F50L1G41LB 128MB
RAM: MT40A512M16TB-062ER 1GB
Ethernet: 2x 2.5G, 4x 1G Lan
WiFi1: MT7976GN 2.4GHz 4T4R
WiFi2: MT7976AN 5.2GHz 4T4R
WiFi3: MT7915AN 5.8GHz 4T4R
Button: Reset, WPS, Turbo
USB: 1 x USB 3.0
Power: DC 12V 5A
Flash instructions:
1. Execute the following operation to open nc shell:
https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting
2. Replace the stock bootloader to OpenWrt's:
dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin
dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip
3. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
4. Download the initramfs image, and restart the router,
waiting for tftp recovery to complete.
5. After openwrt boots up, perform sysupgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/15930
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
1494 lines
55 KiB
Makefile
1494 lines
55 KiB
Makefile
DTS_DIR := $(DTS_DIR)/mediatek
|
|
|
|
define Image/Prepare
|
|
# For UBI we want only one extra block
|
|
rm -f $(KDIR)/ubi_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
|
|
endef
|
|
|
|
define Build/mt7981-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7981-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt7986-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7986-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt7988-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7988-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt798x-gpt
|
|
cp $@ $@.tmp 2>/dev/null || true
|
|
ptgen -g -o $@.tmp -a 1 -l 1024 \
|
|
$(if $(findstring sdmmc,$1), \
|
|
-H \
|
|
-t 0x83 -N bl2 -r -p 4079k@17k \
|
|
) \
|
|
-t 0x83 -N ubootenv -r -p 512k@4M \
|
|
-t 0x83 -N factory -r -p 2M@4608k \
|
|
-t 0xef -N fip -r -p 4M@6656k \
|
|
-N recovery -r -p 32M@12M \
|
|
$(if $(findstring sdmmc,$1), \
|
|
-N install -r -p 20M@44M \
|
|
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
|
|
) \
|
|
$(if $(findstring emmc,$1), \
|
|
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
|
|
)
|
|
cat $@.tmp >> $@
|
|
rm $@.tmp
|
|
endef
|
|
|
|
metadata_gl_json = \
|
|
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
|
|
"metadata_version": "1.1", \
|
|
"compat_version": "$(call json_quote,$(compat_version))", \
|
|
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
|
|
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
|
|
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
|
|
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
|
|
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
|
|
"version": { \
|
|
"release": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
|
|
"dist": "$(call json_quote,$(VERSION_DIST))", \
|
|
"version": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"revision": "$(call json_quote,$(REVISION))", \
|
|
"target": "$(call json_quote,$(TARGETID))", \
|
|
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
|
|
} \
|
|
}'
|
|
|
|
define Build/append-gl-metadata
|
|
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
|
|
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
|
|
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
|
|
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
|
|
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
|
|
ucert -A -c "$@.ucert" -x "$@.sig" ;\
|
|
fwtool -S "$@.ucert" "$@" ;\
|
|
}
|
|
endef
|
|
|
|
define Build/zyxel-nwa-fit-filogic
|
|
$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
|
|
$@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
|
|
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/cetron-header
|
|
$(eval magic=$(word 1,$(1)))
|
|
$(eval model=$(word 2,$(1)))
|
|
( \
|
|
dd if=/dev/zero bs=856 count=1 2>/dev/null; \
|
|
printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
|
|
md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
|
|
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
|
|
cat $@; \
|
|
) > $@.tmp
|
|
fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
|
|
printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
|
|
rm $@.tmp
|
|
endef
|
|
|
|
define Device/abt_asr3000
|
|
DEVICE_VENDOR := ABT
|
|
DEVICE_MODEL := ASR3000
|
|
DEVICE_DTS := mt7981b-abt-asr3000
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot abt_asr3000
|
|
endef
|
|
TARGET_DEVICES += abt_asr3000
|
|
|
|
define Device/acelink_ew-7886cax
|
|
DEVICE_VENDOR := Acelink
|
|
DEVICE_MODEL := EW-7886CAX
|
|
DEVICE_DTS := mt7986a-acelink-ew-7886cax
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += acelink_ew-7886cax
|
|
|
|
define Device/acer_predator-w6
|
|
DEVICE_VENDOR := Acer
|
|
DEVICE_MODEL := Predator W6
|
|
DEVICE_DTS := mt7986a-acer-predator-w6
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += acer_predator-w6
|
|
|
|
define Device/adtran_smartrg
|
|
DEVICE_VENDOR := Adtran
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-hwmon-pwmfan
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/smartrg_sdg-8612
|
|
$(call Device/adtran_smartrg)
|
|
DEVICE_MODEL := SDG-8612
|
|
DEVICE_DTS := mt7986a-smartrg-SDG-8612
|
|
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += smartrg_sdg-8612
|
|
|
|
define Device/smartrg_sdg-8614
|
|
$(call Device/adtran_smartrg)
|
|
DEVICE_MODEL := SDG-8614
|
|
DEVICE_DTS := mt7986a-smartrg-SDG-8614
|
|
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += smartrg_sdg-8614
|
|
|
|
define Device/smartrg_sdg-8622
|
|
$(call Device/adtran_smartrg)
|
|
DEVICE_MODEL := SDG-8622
|
|
DEVICE_DTS := mt7986a-smartrg-SDG-8622
|
|
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += smartrg_sdg-8622
|
|
|
|
define Device/smartrg_sdg-8632
|
|
$(call Device/adtran_smartrg)
|
|
DEVICE_MODEL := SDG-8632
|
|
DEVICE_DTS := mt7986a-smartrg-SDG-8632
|
|
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += smartrg_sdg-8632
|
|
|
|
define Device/smartrg_sdg-8733
|
|
$(call Device/adtran_smartrg)
|
|
DEVICE_MODEL := SDG-8733
|
|
DEVICE_DTS := mt7988a-smartrg-SDG-8733
|
|
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += smartrg_sdg-8733
|
|
|
|
define Device/smartrg_sdg-8734
|
|
$(call Device/adtran_smartrg)
|
|
DEVICE_MODEL := SDG-8734
|
|
DEVICE_DTS := mt7988a-smartrg-SDG-8734
|
|
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-sfp kmod-usb3
|
|
endef
|
|
TARGET_DEVICES += smartrg_sdg-8734
|
|
|
|
define Device/asus_rt-ax59u
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := RT-AX59U
|
|
DEVICE_DTS := mt7986a-asus-rt-ax59u
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ax59u
|
|
|
|
define Device/asus_tuf-ax4200
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := TUF-AX4200
|
|
DEVICE_DTS := mt7986a-asus-tuf-ax4200
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += asus_tuf-ax4200
|
|
|
|
define Device/asus_tuf-ax6000
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := TUF-AX6000
|
|
DEVICE_DTS := mt7986a-asus-tuf-ax6000
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += asus_tuf-ax6000
|
|
|
|
define Device/bananapi_bpi-r3
|
|
DEVICE_VENDOR := Bananapi
|
|
DEVICE_MODEL := BPi-R3
|
|
DEVICE_DTS := mt7986a-bananapi-bpi-r3
|
|
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
|
|
DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand \
|
|
mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd \
|
|
mt7986a-bananapi-bpi-r3-respeaker-2mics
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7915e kmod-mt7986-firmware kmod-sfp kmod-usb3 \
|
|
e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
ARTIFACTS := \
|
|
emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
|
|
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ubi-ddr4
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
|
|
pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7986-bl2 spim-nand-ubi-ddr4 |\
|
|
pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
|
|
pad-to 49M | mt7986-bl2 nor-ddr4 |\
|
|
pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
|
|
pad-to 51M | mt7986-bl2 emmc-ddr4 |\
|
|
pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
|
|
pad-to 56M | mt798x-gpt emmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
ifeq ($(DUMP),)
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
endif
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_COMPAT_VERSION := 1.2
|
|
DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
|
|
endef
|
|
TARGET_DEVICES += bananapi_bpi-r3
|
|
|
|
define Device/bananapi_bpi-r3-mini
|
|
DEVICE_VENDOR := Bananapi
|
|
DEVICE_MODEL := BPi-R3 Mini
|
|
DEVICE_DTS := mt7986a-bananapi-bpi-r3-mini
|
|
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3-mini
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-mt7915e kmod-mt7986-firmware kmod-phy-airoha-en8811h \
|
|
kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := snand-factory.bin sysupgrade.itb
|
|
ifeq ($(DUMP),)
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
endif
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
snand-factory.bin snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
|
|
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-mini-emmc
|
|
ARTIFACT/snand-factory.bin := mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
|
|
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
|
|
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
|
|
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 2048k | \
|
|
ubinize-image fit squashfs-sysupgrade.itb
|
|
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ubi-ddr4
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-mini-snand
|
|
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7986_bananapi_bpi-r3-mini-snand-u-boot.fip
|
|
ifneq ($(CONFIG_PACKAGE_airoha-en8811h-firmware),)
|
|
UBINIZE_PARTS += en8811h-fw=:$(STAGING_DIR_IMAGE)/EthMD32.bin
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += bananapi_bpi-r3-mini
|
|
|
|
define Device/bananapi_bpi-r4-common
|
|
DEVICE_VENDOR := Bananapi
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTS_LOADADDR := 0x45f00000
|
|
DEVICE_DTS_OVERLAY:= mt7988a-bananapi-bpi-r4-emmc mt7988a-bananapi-bpi-r4-rtc mt7988a-bananapi-bpi-r4-sd mt7988a-bananapi-bpi-r4-wifi-mt7996a
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-mux-pca954x kmod-eeprom-at24 kmod-mt7996-firmware \
|
|
kmod-rtc-pcf8563 kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_LOADADDR := 0x46000000
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
ARTIFACTS := \
|
|
emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot $$(DEVICE_NAME)-emmc
|
|
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-ubi-comb
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot $$(DEVICE_NAME)-snand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7988-bl2 sdmmc-comb |\
|
|
pad-to 6656k | mt7988-bl31-uboot $$(DEVICE_NAME)-sdmmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7988-bl2 spim-nand-ubi-comb |\
|
|
pad-to 45M | mt7988-bl31-uboot $$(DEVICE_NAME)-snand |\
|
|
pad-to 51M | mt7988-bl2 emmc-comb |\
|
|
pad-to 52M | mt7988-bl31-uboot $$(DEVICE_NAME)-emmc |\
|
|
pad-to 56M | mt798x-gpt emmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
|
|
define Device/bananapi_bpi-r4
|
|
DEVICE_MODEL := BPi-R4
|
|
DEVICE_DTS := mt7988a-bananapi-bpi-r4
|
|
DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4
|
|
$(call Device/bananapi_bpi-r4-common)
|
|
endef
|
|
TARGET_DEVICES += bananapi_bpi-r4
|
|
|
|
define Device/bananapi_bpi-r4-poe
|
|
DEVICE_MODEL := BPi-R4 2.5GE
|
|
DEVICE_DTS := mt7988a-bananapi-bpi-r4-poe
|
|
DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4-poe
|
|
$(call Device/bananapi_bpi-r4-common)
|
|
DEVICE_PACKAGES += mt7988-2p5g-phy-firmware
|
|
endef
|
|
TARGET_DEVICES += bananapi_bpi-r4-poe
|
|
|
|
define Device/cetron_ct3003
|
|
DEVICE_VENDOR := Cetron
|
|
DEVICE_MODEL := CT3003
|
|
DEVICE_DTS := mt7981b-cetron-ct3003
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
|
|
endef
|
|
TARGET_DEVICES += cetron_ct3003
|
|
|
|
define Device/cmcc_rax3000m
|
|
DEVICE_VENDOR := CMCC
|
|
DEVICE_MODEL := RAX3000M
|
|
DEVICE_DTS := mt7981b-cmcc-rax3000m
|
|
DEVICE_DTS_OVERLAY := mt7981b-cmcc-rax3000m-emmc mt7981b-cmcc-rax3000m-nand
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
|
|
e2fsprogs f2fsck mkf2fs
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nand-preloader.bin nand-bl31-uboot.fip
|
|
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
|
|
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr4
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-emmc
|
|
ARTIFACT/nand-preloader.bin := mt7981-bl2 spim-nand-ddr4
|
|
ARTIFACT/nand-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand
|
|
endef
|
|
TARGET_DEVICES += cmcc_rax3000m
|
|
|
|
define Device/comfast_cf-e393ax
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E393AX
|
|
DEVICE_DTS := mt7981a-comfast-cf-e393ax
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e393ax
|
|
|
|
define Device/confiabits_mt7981
|
|
DEVICE_VENDOR := Confiabits
|
|
DEVICE_MODEL := MT7981
|
|
DEVICE_DTS := mt7981b-confiabits-mt7981
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-2500wan-gmac2-rfb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += confiabits_mt7981
|
|
|
|
define Device/cudy_m3000-v1
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := M3000
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_DTS := mt7981b-cudy-m3000-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += R37
|
|
DEVICE_DTS_LOADADDR := 0x44000000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_m3000-v1
|
|
|
|
define Device/cudy_re3000-v1
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := RE3000
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_DTS := mt7981b-cudy-re3000-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE_SIZE := 15424k
|
|
SUPPORTED_DEVICES += R36
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_re3000-v1
|
|
|
|
define Device/cudy_tr3000-v1
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := TR3000
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_DTS := mt7981b-cudy-tr3000-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += R47
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_tr3000-v1
|
|
|
|
define Device/cudy_wr3000-v1
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := WR3000
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_DTS := mt7981b-cudy-wr3000-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE_SIZE := 15424k
|
|
SUPPORTED_DEVICES += R31
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_wr3000-v1
|
|
|
|
define Device/dlink_aquila-pro-ai-m30-a1
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := AQUILA PRO AI M30
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_DTS := mt7981b-dlink-aquila-pro-ai-m30-a1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += recovery.bin
|
|
IMAGE_SIZE := 51200k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/recovery.bin := sysupgrade-tar | pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E6110001 \x6A\x28\xEE\x0B \x00\x00\x2C\x00 \x00\x00\x20\x03 \x61\x6E
|
|
endef
|
|
TARGET_DEVICES += dlink_aquila-pro-ai-m30-a1
|
|
|
|
define Device/edgecore_eap111
|
|
DEVICE_VENDOR := Edgecore
|
|
DEVICE_MODEL := EAP111
|
|
DEVICE_DTS := mt7981a-edgecore-eap111
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_OPTS := -E 5
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE_SIZE := 65536k
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += edgecore_eap111
|
|
|
|
define Device/glinet_gl-mt2500
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT2500
|
|
DEVICE_DTS := mt7981b-glinet-gl-mt2500
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := -wpad-basic-mbedtls e2fsprogs f2fsck mkf2fs kmod-usb3
|
|
SUPPORTED_DEVICES += glinet,mt2500-emmc
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt2500
|
|
|
|
define Device/glinet_gl-mt3000
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT3000
|
|
DEVICE_DTS := mt7981b-glinet-gl-mt3000
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += glinet,mt3000-snand
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 246272k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt3000
|
|
|
|
define Device/glinet_gl-mt6000
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT6000
|
|
DEVICE_DTS := mt7986a-glinet-gl-mt6000
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt6000
|
|
|
|
define Device/glinet_gl-x3000-xe3000-common
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware mkf2fs \
|
|
kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option \
|
|
kmod-usb-storage kmod-usb-net-qmi-wwan uqmi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/glinet_gl-x3000
|
|
DEVICE_MODEL := GL-X3000
|
|
DEVICE_DTS := mt7981a-glinet-gl-x3000
|
|
SUPPORTED_DEVICES := glinet,gl-x3000
|
|
$(call Device/glinet_gl-x3000-xe3000-common)
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x3000
|
|
|
|
define Device/glinet_gl-xe3000
|
|
DEVICE_MODEL := GL-XE3000
|
|
DEVICE_DTS := mt7981a-glinet-gl-xe3000
|
|
SUPPORTED_DEVICES := glinet,gl-xe3000
|
|
$(call Device/glinet_gl-x3000-xe3000-common)
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-xe3000
|
|
|
|
define Device/h3c_magic-nx30-pro
|
|
DEVICE_VENDOR := H3C
|
|
DEVICE_MODEL := Magic NX30 Pro
|
|
DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGE_SIZE := 65536k
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
|
|
endef
|
|
TARGET_DEVICES += h3c_magic-nx30-pro
|
|
|
|
define Device/jcg_q30-pro
|
|
DEVICE_VENDOR := JCG
|
|
DEVICE_MODEL := Q30 PRO
|
|
DEVICE_DTS := mt7981b-jcg-q30-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot jcg_q30-pro
|
|
endef
|
|
TARGET_DEVICES += jcg_q30-pro
|
|
|
|
define Device/jdcloud_re-cp-03
|
|
DEVICE_VENDOR := JDCloud
|
|
DEVICE_MODEL := RE-CP-03
|
|
DEVICE_DTS := mt7986a-jdcloud-re-cp-03
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware \
|
|
e2fsprogs f2fsck mkf2fs
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
ARTIFACTS :=gpt.bin preloader.bin bl31-uboot.fip
|
|
ARTIFACT/gpt.bin := mt798x-gpt emmc
|
|
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot jdcloud_re-cp-03
|
|
endef
|
|
TARGET_DEVICES += jdcloud_re-cp-03
|
|
|
|
define Device/mediatek_mt7981-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7981 rfb
|
|
DEVICE_DTS := mt7981-rfb
|
|
DEVICE_DTS_OVERLAY:= \
|
|
mt7981-rfb-spim-nand \
|
|
mt7981-rfb-mxl-2p5g-phy-eth1 \
|
|
mt7981-rfb-mxl-2p5g-phy-swp5
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := .itb
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
|
|
spim-nand-preloader.bin spim-nand-bl31-uboot.fip
|
|
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr3
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr3
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
|
|
ARTIFACT/snfi-nand-preloader.bin := mt7981-bl2 snand-ddr3
|
|
ARTIFACT/snfi-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-snfi
|
|
ARTIFACT/spim-nand-preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/spim-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-spim-nand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
|
|
pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
|
|
pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
|
|
pad-to 49M | mt7981-bl2 nor-ddr3 |\
|
|
pad-to 50M | mt7981-bl31-uboot rfb-nor |\
|
|
pad-to 51M | mt7981-bl2 snand-ddr3 |\
|
|
pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7981-rfb
|
|
|
|
define Device/mediatek_mt7986a-rfb-nand
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7986 rfba AP (NAND)
|
|
DEVICE_DTS := mt7986a-rfb-spim-nand
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
|
|
|
|
define Device/mediatek_mt7986b-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MTK7986 rfbb AP
|
|
DEVICE_DTS := mt7986b-rfb
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986b-rfb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7986b-rfb
|
|
|
|
define Device/mediatek_mt7988a-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7988A rfb
|
|
DEVICE_DTS := mt7988a-rfb
|
|
DEVICE_DTS_OVERLAY:= \
|
|
mt7988a-rfb-emmc \
|
|
mt7988a-rfb-sd \
|
|
mt7988a-rfb-snfi-nand \
|
|
mt7988a-rfb-spim-nand \
|
|
mt7988a-rfb-spim-nand-factory \
|
|
mt7988a-rfb-spim-nor \
|
|
mt7988a-rfb-eth1-aqr \
|
|
mt7988a-rfb-eth1-i2p5g-phy \
|
|
mt7988a-rfb-eth1-mxl \
|
|
mt7988a-rfb-eth1-sfp \
|
|
mt7988a-rfb-eth2-aqr \
|
|
mt7988a-rfb-eth2-mxl \
|
|
mt7988a-rfb-eth2-sfp
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x45f00000
|
|
DEVICE_PACKAGES := mt7988-2p5g-phy-firmware kmod-sfp
|
|
KERNEL_LOADADDR := 0x46000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := .itb
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
|
|
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot rfb-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7988-bl2 nor-comb
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7988-bl31-uboot rfb-nor
|
|
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-ubi-comb
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7988-bl2 sdmmc-comb |\
|
|
pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7988-bl2 spim-nand-comb |\
|
|
pad-to 45M | mt7988-bl31-uboot rfb-snand |\
|
|
pad-to 51M | mt7988-bl2 nor-comb |\
|
|
pad-to 51M | mt7988-bl31-uboot rfb-nor |\
|
|
pad-to 55M | mt7988-bl2 emmc-comb |\
|
|
pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
|
|
pad-to 62M | mt798x-gpt emmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7988a-rfb
|
|
|
|
define Device/mercusys_mr90x-v1
|
|
DEVICE_VENDOR := MERCUSYS
|
|
DEVICE_MODEL := MR90X v1
|
|
DEVICE_DTS := mt7986b-mercusys-mr90x-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mercusys_mr90x-v1
|
|
|
|
define Device/netcore_n60
|
|
DEVICE_VENDOR := Netcore
|
|
DEVICE_MODEL := N60
|
|
DEVICE_DTS := mt7986a-netcore-n60
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60
|
|
endef
|
|
TARGET_DEVICES += netcore_n60
|
|
|
|
define Device/netgear_wax220
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := WAX220
|
|
DEVICE_DTS := mt7986b-netgear-wax220
|
|
DEVICE_DTS_DIR := ../dts
|
|
NETGEAR_ENC_MODEL := WAX220
|
|
NETGEAR_ENC_REGION := US
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGE_SIZE := 32768k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGES += factory.img
|
|
# Padding to 10M seems to be required by OEM web interface
|
|
IMAGE/factory.img := sysupgrade-tar | \
|
|
pad-to 10M | check-size | netgear-encrypted-factory
|
|
endef
|
|
TARGET_DEVICES += netgear_wax220
|
|
|
|
define Device/nokia_ea0326gmp
|
|
DEVICE_VENDOR := Nokia
|
|
DEVICE_MODEL := EA0326GMP
|
|
DEVICE_DTS := mt7981b-nokia-ea0326gmp
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot nokia_ea0326gmp
|
|
endef
|
|
TARGET_DEVICES += nokia_ea0326gmp
|
|
|
|
define Device/openembed_som7981
|
|
DEVICE_VENDOR := OpenEmbed
|
|
DEVICE_MODEL := SOM7981
|
|
DEVICE_DTS := mt7981b-openembed-som7981
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 244224k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += openembed_som7981
|
|
|
|
define Build/append-openwrt-one-eeprom
|
|
dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
|
|
endef
|
|
|
|
define Device/openwrt_one
|
|
DEVICE_VENDOR := OpenWrt
|
|
DEVICE_MODEL := One
|
|
DEVICE_DTS := mt7981b-openwrt-one
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-nvme kmod-phy-airoha-en8811h
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := .itb
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
snand-preloader.bin snand-bl31-uboot.fip \
|
|
factory.ubi snand-factory.bin nor-factory.bin
|
|
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor
|
|
ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand
|
|
ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb
|
|
ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
|
|
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
|
|
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
|
|
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \
|
|
ubinize-image fit squashfs-sysupgrade.itb
|
|
ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \
|
|
append-openwrt-one-eeprom | pad-to 1024k | \
|
|
mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \
|
|
append-image-stage initramfs.itb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip recovery=:$(KDIR)/tmp/openwrt-mediatek-filogic-openwrt_one-initramfs.itb \
|
|
$(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb)
|
|
endef
|
|
TARGET_DEVICES += openwrt_one
|
|
|
|
define Device/qihoo_360t7
|
|
DEVICE_VENDOR := Qihoo
|
|
DEVICE_MODEL := 360T7
|
|
DEVICE_DTS := mt7981b-qihoo-360t7
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
|
|
endef
|
|
TARGET_DEVICES += qihoo_360t7
|
|
|
|
define Device/routerich_ax3000
|
|
DEVICE_VENDOR := Routerich
|
|
DEVICE_MODEL := AX3000
|
|
DEVICE_DTS := mt7981b-routerich-ax3000
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
|
|
endef
|
|
TARGET_DEVICES += routerich_ax3000
|
|
|
|
define Device/ruijie_rg-x60-pro
|
|
DEVICE_VENDOR := Ruijie
|
|
DEVICE_MODEL := RG-X60 Pro
|
|
DEVICE_DTS := mt7986a-ruijie-rg-x60-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += ruijie_rg-x60-pro
|
|
|
|
define Device/tplink_re6000xd
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := RE6000XD
|
|
DEVICE_DTS := mt7986b-tplink-re6000xd
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += tplink_re6000xd
|
|
|
|
define Device/tplink_tl-xdr-common
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := fitblk kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
|
|
endef
|
|
|
|
define Device/tplink_tl-xdr4288
|
|
DEVICE_MODEL := TL-XDR4288
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr4288
|
|
|
|
define Device/tplink_tl-xdr6086
|
|
DEVICE_MODEL := TL-XDR6086
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr6086
|
|
|
|
define Device/tplink_tl-xdr6088
|
|
DEVICE_MODEL := TL-XDR6088
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr6088
|
|
|
|
define Device/tplink_tl-xtr8488
|
|
DEVICE_MODEL := TL-XTR8488
|
|
DEVICE_DTS := mt7986a-tplink-tl-xtr8488
|
|
$(call Device/tplink_tl-xdr-common)
|
|
DEVICE_PACKAGES += kmod-mt7915-firmware
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xtr8488
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xtr8488
|
|
|
|
define Device/ubnt_unifi-6-plus
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi U6+
|
|
DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-6-plus
|
|
|
|
define Device/unielec_u7981-01
|
|
DEVICE_VENDOR := Unielec
|
|
DEVICE_MODEL := U7981-01
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs fdisk partx-utils
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/unielec_u7981-01-emmc
|
|
DEVICE_DTS := mt7981b-unielec-u7981-01-emmc
|
|
DEVICE_VARIANT := (EMMC)
|
|
$(call Device/unielec_u7981-01)
|
|
endef
|
|
TARGET_DEVICES += unielec_u7981-01-emmc
|
|
|
|
define Device/unielec_u7981-01-nand
|
|
DEVICE_DTS := mt7981b-unielec-u7981-01-nand
|
|
DEVICE_VARIANT := (NAND)
|
|
$(call Device/unielec_u7981-01)
|
|
endef
|
|
TARGET_DEVICES += unielec_u7981-01-nand
|
|
|
|
define Device/wavlink_wl-wn586x3
|
|
DEVICE_VENDOR := WAVLINK
|
|
DEVICE_MODEL := WL-WN586X3
|
|
DEVICE_DTS := mt7981b-wavlink-wl-wn586x3
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
IMAGE_SIZE := 15424k
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += wavlink_wl-wn586x3
|
|
|
|
define Device/xiaomi_mi-router-ax3000t
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router AX3000T
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-ax3000t
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-ax3000t
|
|
|
|
define Device/xiaomi_mi-router-ax3000t-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router AX3000T (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-ax3000t-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-ax3000t
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-ax3000t-ubootmod
|
|
|
|
define Device/xiaomi_mi-router-wr30u-stock
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (stock layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
|
|
|
|
define Device/xiaomi_mi-router-wr30u-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
|
|
|
|
define Device/xiaomi_redmi-router-ax6000-stock
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
|
|
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
|
|
|
|
define Device/xiaomi_redmi-router-ax6000-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGES := sysupgrade.itb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
|
|
|
|
define Device/yuncore_ax835
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := AX835
|
|
DEVICE_DTS := mt7981b-yuncore-ax835
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE_SIZE := 14336k
|
|
SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
endef
|
|
TARGET_DEVICES += yuncore_ax835
|
|
|
|
|
|
define Device/zbtlink_zbt-z8102ax
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-Z8102AX
|
|
DEVICE_DTS := mt7981b-zbtlink-zbt-z8102ax
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option
|
|
KERNEL_IN_UBI := 1
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-z8102ax
|
|
|
|
define Device/zbtlink_zbt-z8103ax
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-Z8103AX
|
|
DEVICE_DTS := mt7981b-zbtlink-zbt-z8103ax
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_IN_UBI := 1
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-z8103ax
|
|
|
|
define Device/zyxel_ex5601-t0-stock
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := EX5601-T0
|
|
DEVICE_VARIANT := (stock layout)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
|
|
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256k
|
|
PAGESIZE := 4096
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5601-t0-stock
|
|
|
|
define Device/zyxel_ex5601-t0-ubootmod
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := EX5601-T0
|
|
DEVICE_VARIANT := (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGES := sysupgrade.itb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256k
|
|
PAGESIZE := 4096
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
KERNEL := kernel-bin | lzma
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-4k-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot zyxel_ex5601-t0
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5601-t0-ubootmod
|
|
|
|
define Device/zyxel_ex5700-telenor
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := EX5700 (Telenor)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-ubootenv-nvram kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5700-telenor
|
|
|
|
define Device/zyxel_nwa50ax-pro
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NWA50AX Pro
|
|
DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
|
|
DEVICE_DTS_LOADADDR := 0x44000000
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa50ax-pro
|