mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
baad22eed3
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.9.y - Remove led1 from diag.sh for RPi3 since it causes boot issues. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
282 lines
5.8 KiB
Diff
282 lines
5.8 KiB
Diff
From 33800ba2a14ff23db96fe5ea6e421a731f60c52b Mon Sep 17 00:00:00 2001
|
|
From: Scott Ellis <scott@jumpnowtek.com>
|
|
Date: Fri, 27 Jan 2017 06:42:42 -0500
|
|
Subject: [PATCH] Add overlay for mcp3008 adc (#1818)
|
|
|
|
Some example usage:
|
|
|
|
SPI0.0
|
|
dtparam=spi=on
|
|
dtoverlay=mcp3008:spi0-0-present
|
|
|
|
SPI0.1
|
|
dtparam=spi=on
|
|
dtoverlay=mcp3008:spi0-1-present
|
|
|
|
SPI0.0 and SPI0.1
|
|
dtparam=spi=on
|
|
dtoverlay=mcp3008:spi0-0-present,spi0-1-present
|
|
|
|
SPI1.0
|
|
dtparam=spi=on
|
|
dtoverlay=spi1-1cs
|
|
dtoverlay=mcp3008:spi1-0-present
|
|
|
|
SPI1.2
|
|
dtparam=spi=on
|
|
dtoverlay=spi1-1cs:cs0_pin=16
|
|
dtoverlay=mcp3008:spi1-0-present
|
|
|
|
SPI1.0 and SPI1.1
|
|
dtoverlay=spi1-2cs
|
|
dtoverlay=mcp3008:spi1-0-present,spi1-1-present
|
|
|
|
Changing the speed
|
|
|
|
SPI0.0
|
|
dtparam=spi=on
|
|
dtoverlay=mcp3008:spi0-0-present,spi0-0-speed=2000000
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 9 ++
|
|
arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 205 +++++++++++++++++++++++++
|
|
3 files changed, 215 insertions(+)
|
|
create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -47,6 +47,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
mcp23s17.dtbo \
|
|
mcp2515-can0.dtbo \
|
|
mcp2515-can1.dtbo \
|
|
+ mcp3008.dtbo \
|
|
midi-uart0.dtbo \
|
|
mmc.dtbo \
|
|
mz61581.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -742,6 +742,15 @@ Params: oscillator Clock fr
|
|
interrupt GPIO for interrupt signal
|
|
|
|
|
|
+Name: mcp3008
|
|
+Info: Configures MCP3008 A/D converters
|
|
+ For devices on spi1 or spi2, the interfaces should be enabled
|
|
+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
|
|
+Load: dtoverlay=mcp3008,<param>[=<val>]
|
|
+Params: spi<n>-<m>-present boolean, configure device at spi<n>, cs<m>
|
|
+ spi<n>-<m>-speed integer, set the spi bus speed for this device
|
|
+
|
|
+
|
|
Name: midi-uart0
|
|
Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets
|
|
31.25kbaud, the frequency required for MIDI
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts
|
|
@@ -0,0 +1,205 @@
|
|
+/*
|
|
+ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&spidev0>;
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spidev1>;
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target-path = "spi1/spidev@0";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target-path = "spi1/spidev@1";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target-path = "spi1/spidev@2";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@5 {
|
|
+ target-path = "spi2/spidev@0";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@6 {
|
|
+ target-path = "spi2/spidev@1";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@7 {
|
|
+ target-path = "spi2/spidev@2";
|
|
+ __dormant__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@8 {
|
|
+ target = <&spi0>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_00: mcp3008@0 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@9 {
|
|
+ target = <&spi0>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_01: mcp3008@1 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <1>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@10 {
|
|
+ target = <&spi1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_10: mcp3008@0 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@11 {
|
|
+ target = <&spi1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_11: mcp3008@1 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <1>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@12 {
|
|
+ target = <&spi1>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_12: mcp3008@2 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <2>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@13 {
|
|
+ target = <&spi2>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_20: mcp3008@0 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <0>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@14 {
|
|
+ target = <&spi2>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_21: mcp3008@1 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <1>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@15 {
|
|
+ target = <&spi2>;
|
|
+ __dormant__ {
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ mcp3008_22: mcp3008@2 {
|
|
+ compatible = "mcp3008";
|
|
+ reg = <2>;
|
|
+ spi-max-frequency = <1600000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ spi0-0-present = <0>, "+0+8";
|
|
+ spi0-1-present = <0>, "+1+9";
|
|
+ spi1-0-present = <0>, "+2+10";
|
|
+ spi1-1-present = <0>, "+3+11";
|
|
+ spi1-2-present = <0>, "+4+12";
|
|
+ spi2-0-present = <0>, "+5+13";
|
|
+ spi2-1-present = <0>, "+6+14";
|
|
+ spi2-2-present = <0>, "+7+15";
|
|
+ spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0";
|
|
+ spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0";
|
|
+ spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0";
|
|
+ spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0";
|
|
+ spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0";
|
|
+ spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0";
|
|
+ spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0";
|
|
+ spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0";
|
|
+ };
|
|
+};
|