mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
ae67f5ffae
This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
88 lines
1.8 KiB
Diff
88 lines
1.8 KiB
Diff
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
|
|
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
|
|
@@ -18,12 +18,20 @@
|
|
compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
|
|
"marvell,kirkwood";
|
|
|
|
+ aliases {
|
|
+ led-boot = &led_health;
|
|
+ led-failsafe = &led_fault;
|
|
+ led-running = &led_health;
|
|
+ led-upgrade = &led_fault;
|
|
+ };
|
|
+
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
|
|
chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
stdout-path = "uart0:115200n8";
|
|
};
|
|
|
|
@@ -37,8 +45,8 @@
|
|
eject {
|
|
debounce_interval = <50>;
|
|
wakeup-source;
|
|
- linux,code = <KEY_EJECTCD>;
|
|
- label = "Eject Button";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ label = "Reset";
|
|
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
@@ -48,12 +56,11 @@
|
|
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
|
|
pinctrl-names = "default";
|
|
|
|
- health {
|
|
+ led_health: health {
|
|
label = "pogoplugv4:green:health";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
- default-state = "on";
|
|
};
|
|
- fault {
|
|
+ led_fault: fault {
|
|
label = "pogoplugv4:red:fault";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
@@ -137,29 +144,19 @@
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
- label = "u-boot";
|
|
- reg = <0x00000000 0x200000>;
|
|
+ label = "uboot";
|
|
+ reg = <0x00000000 0x1c0000>;
|
|
read-only;
|
|
};
|
|
|
|
- partition@200000 {
|
|
- label = "uImage";
|
|
- reg = <0x00200000 0x300000>;
|
|
- };
|
|
-
|
|
- partition@500000 {
|
|
- label = "uImage2";
|
|
- reg = <0x00500000 0x300000>;
|
|
+ partition@1c0000 {
|
|
+ label = "uboot_env";
|
|
+ reg = <0x001c0000 0x40000>;
|
|
};
|
|
|
|
- partition@800000 {
|
|
- label = "failsafe";
|
|
- reg = <0x00800000 0x800000>;
|
|
- };
|
|
-
|
|
- partition@1000000 {
|
|
- label = "root";
|
|
- reg = <0x01000000 0x7000000>;
|
|
+ partition@200000 {
|
|
+ label = "ubi";
|
|
+ reg = <0x00200000 0x7e00000>;
|
|
};
|
|
};
|
|
};
|