mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
354 lines
8.9 KiB
Diff
354 lines
8.9 KiB
Diff
From fe90ee51b283f7cbbce9980b76b3da8b31d39c60 Mon Sep 17 00:00:00 2001
|
|
From: MikeDK <m.kaplan@evva.com>
|
|
Date: Fri, 31 Jan 2020 10:57:21 +0100
|
|
Subject: [PATCH] overlays: Add ssd1306-spi, ssh1106-spi, ssd-1351-spi
|
|
|
|
Add overlays for SSD1306, SH1106 and SSD1351 based OLED displays.
|
|
SH1106 is present in many 1.3 inch OLEDs and SSD1351 is present in
|
|
1.5 inch RGB OLEDs from AliExpress.
|
|
|
|
This will load the staging fbtft drivers.
|
|
|
|
Signed-off-by: Michael Kaplan <m.kaplan@evva.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 3 +
|
|
arch/arm/boot/dts/overlays/README | 35 ++++++++
|
|
.../boot/dts/overlays/sh1106-spi-overlay.dts | 84 +++++++++++++++++++
|
|
.../boot/dts/overlays/ssd1306-spi-overlay.dts | 84 +++++++++++++++++++
|
|
.../boot/dts/overlays/ssd1351-spi-overlay.dts | 83 ++++++++++++++++++
|
|
5 files changed, 289 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -145,6 +145,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
sdhost.dtbo \
|
|
sdio.dtbo \
|
|
sdtweak.dtbo \
|
|
+ sh1106-spi.dtbo \
|
|
smi.dtbo \
|
|
smi-dev.dtbo \
|
|
smi-nand.dtbo \
|
|
@@ -168,6 +169,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
spi6-1cs.dtbo \
|
|
spi6-2cs.dtbo \
|
|
ssd1306.dtbo \
|
|
+ ssd1306-spi.dtbo \
|
|
+ ssd1351-spi.dtbo \
|
|
superaudioboard.dtbo \
|
|
sx150x.dtbo \
|
|
tc358743.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -2145,6 +2145,18 @@ Params: overclock_50 Clock (i
|
|
(default on)
|
|
|
|
|
|
+Name: sh1106-spi
|
|
+Info: Overlay for SH1106 OLED via SPI using fbtft staging driver.
|
|
+Load: dtoverlay=sh1106-spi,<param>=<val>
|
|
+Params: speed SPI bus speed (default 4000000)
|
|
+ rotate Display rotation (0, 90, 180 or 270; default 0)
|
|
+ fps Delay between frame updates (default 25)
|
|
+ debug Debug output level (0-7; default 0)
|
|
+ dc_pin GPIO pin for D/C (default 24)
|
|
+ reset_pin GPIO pin for RESET (default 25)
|
|
+ height Display height (32 or 64; default 64)
|
|
+
|
|
+
|
|
Name: smi
|
|
Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25!
|
|
Load: dtoverlay=smi
|
|
@@ -2428,6 +2440,29 @@ Params: address Location
|
|
https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
|
|
|
|
|
|
+Name: ssd1306-spi
|
|
+Info: Overlay for SSD1306 OLED via SPI using fbtft staging driver.
|
|
+Load: dtoverlay=ssd1306-spi,<param>=<val>
|
|
+Params: speed SPI bus speed (default 10000000)
|
|
+ rotate Display rotation (0, 90, 180 or 270; default 0)
|
|
+ fps Delay between frame updates (default 25)
|
|
+ debug Debug output level (0-7; default 0)
|
|
+ dc_pin GPIO pin for D/C (default 24)
|
|
+ reset_pin GPIO pin for RESET (default 25)
|
|
+ height Display height (32 or 64; default 64)
|
|
+
|
|
+
|
|
+Name: ssd1351-spi
|
|
+Info: Overlay for SSD1351 OLED via SPI using fbtft staging driver.
|
|
+Load: dtoverlay=ssd1351-spi,<param>=<val>
|
|
+Params: speed SPI bus speed (default 4500000)
|
|
+ rotate Display rotation (0, 90, 180 or 270; default 0)
|
|
+ fps Delay between frame updates (default 25)
|
|
+ debug Debug output level (0-7; default 0)
|
|
+ dc_pin GPIO pin for D/C (default 24)
|
|
+ reset_pin GPIO pin for RESET (default 25)
|
|
+
|
|
+
|
|
Name: superaudioboard
|
|
Info: Configures the SuperAudioBoard sound card
|
|
Load: dtoverlay=superaudioboard,<param>=<val>
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
|
|
@@ -0,0 +1,84 @@
|
|
+/*
|
|
+ * Device Tree overlay for SH1106 based SPI OLED display
|
|
+ *
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spidev0>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&spidev1>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ sh1106_pins: sh1106_pins {
|
|
+ brcm,pins = <25 24>;
|
|
+ brcm,function = <1 1>; /* out out */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ /* needed to avoid dtc warning */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ sh1106: sh1106@0{
|
|
+ compatible = "sinowealth,sh1106";
|
|
+ reg = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sh1106_pins>;
|
|
+
|
|
+ spi-max-frequency = <4000000>;
|
|
+ bgr = <0>;
|
|
+ bpp = <1>;
|
|
+ rotate = <0>;
|
|
+ fps = <25>;
|
|
+ buswidth = <8>;
|
|
+ reset-gpios = <&gpio 25 0>;
|
|
+ dc-gpios = <&gpio 24 0>;
|
|
+ debug = <0>;
|
|
+
|
|
+ sinowealth,height = <64>;
|
|
+ sinowealth,width = <128>;
|
|
+ sinowealth,page-offset = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ speed = <&sh1106>,"spi-max-frequency:0";
|
|
+ rotate = <&sh1106>,"rotate:0";
|
|
+ fps = <&sh1106>,"fps:0";
|
|
+ debug = <&sh1106>,"debug:0";
|
|
+ dc_pin = <&sh1106>,"dc-gpios:4",
|
|
+ <&sh1106_pins>,"brcm,pins:4";
|
|
+ reset_pin = <&sh1106>,"reset-gpios:4",
|
|
+ <&sh1106_pins>,"brcm,pins:0";
|
|
+ height = <&sh1106>,"sinowealth,height:0";
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
|
|
@@ -0,0 +1,84 @@
|
|
+/*
|
|
+ * Device Tree overlay for SSD1306 based SPI OLED display
|
|
+ *
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spidev0>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&spidev1>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ ssd1306_pins: ssd1306_pins {
|
|
+ brcm,pins = <25 24>;
|
|
+ brcm,function = <1 1>; /* out out */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ /* needed to avoid dtc warning */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ ssd1306: ssd1306@0{
|
|
+ compatible = "solomon,ssd1306";
|
|
+ reg = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&ssd1306_pins>;
|
|
+
|
|
+ spi-max-frequency = <10000000>;
|
|
+ bgr = <0>;
|
|
+ bpp = <1>;
|
|
+ rotate = <0>;
|
|
+ fps = <25>;
|
|
+ buswidth = <8>;
|
|
+ reset-gpios = <&gpio 25 0>;
|
|
+ dc-gpios = <&gpio 24 0>;
|
|
+ debug = <0>;
|
|
+
|
|
+ solomon,height = <64>;
|
|
+ solomon,width = <128>;
|
|
+ solomon,page-offset = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ speed = <&ssd1306>,"spi-max-frequency:0";
|
|
+ rotate = <&ssd1306>,"rotate:0";
|
|
+ fps = <&ssd1306>,"fps:0";
|
|
+ debug = <&ssd1306>,"debug:0";
|
|
+ dc_pin = <&ssd1306>,"dc-gpios:4",
|
|
+ <&ssd1306_pins>,"brcm,pins:4";
|
|
+ reset_pin = <&ssd1306>,"reset-gpios:4",
|
|
+ <&ssd1306_pins>,"brcm,pins:0";
|
|
+ height = <&ssd1306>,"solomon,height:0";
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
|
|
@@ -0,0 +1,83 @@
|
|
+/*
|
|
+ * Device Tree overlay for SSD1351 based SPI OLED display
|
|
+ *
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spidev0>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&spidev1>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ ssd1351_pins: ssd1351_pins {
|
|
+ brcm,pins = <25 24>;
|
|
+ brcm,function = <1 1>; /* out out */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@4 {
|
|
+ target = <&spi0>;
|
|
+ __overlay__ {
|
|
+ /* needed to avoid dtc warning */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ ssd1351: ssd1351@0{
|
|
+ compatible = "solomon,ssd1351";
|
|
+ reg = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&ssd1351_pins>;
|
|
+
|
|
+ spi-max-frequency = <4500000>;
|
|
+ bgr = <0>;
|
|
+ bpp = <16>;
|
|
+ rotate = <0>;
|
|
+ fps = <25>;
|
|
+ buswidth = <8>;
|
|
+ reset-gpios = <&gpio 25 0>;
|
|
+ dc-gpios = <&gpio 24 0>;
|
|
+ debug = <0>;
|
|
+
|
|
+ solomon,height = <128>;
|
|
+ solomon,width = <128>;
|
|
+ solomon,page-offset = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ speed = <&ssd1351>,"spi-max-frequency:0";
|
|
+ rotate = <&ssd1351>,"rotate:0";
|
|
+ fps = <&ssd1351>,"fps:0";
|
|
+ debug = <&ssd1351>,"debug:0";
|
|
+ dc_pin = <&ssd1351>,"dc-gpios:4",
|
|
+ <&ssd1351_pins>,"brcm,pins:4";
|
|
+ reset_pin = <&ssd1351>,"reset-gpios:4",
|
|
+ <&ssd1351_pins>,"brcm,pins:0";
|
|
+ };
|
|
+};
|