openwrt/target/linux
Tobias Schramm b6946542f8 ath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP
Flash:    8 MB
RAM:      64 MB
SoC:      AR7242
Switch:   bcm53128
USB:      1x USB 2.0
Ethernet: 8x GbE, 1x FE

The Ubiquiti ToughSwitch 8XP is a 8-port PoE Gigabit switch with a single
Fast-Ethernet management port. It supports both 24V passive PoE and 48V
802.11af/at PoE out on all eight ports.

By default the single Fast-Ethernet port labeled "MGMT" is configured as the
WAN port. Thus access to the device is only possible via the eight switch
ports.

Installation of the firware is possible either via serial + tftpboot or
the factory firmware update function via webinterface.

Serial: 3v3 115200 8n1

The serial header is located in the lower left corner of the switches PCB:

|
|
|
| o
| o RX
| o TX
| o GND
|
|
++  +-++-+  ++  ++  +
 +--+ ++ +--++--++--+

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
[fix whitespace issue]
Signed-off-by: David Bauer <mail@david-bauer.net>
2020-01-12 14:12:50 +01:00
..
apm821xx apm821xx: mbl_gen_hdd_img.sh: switch to /bin/sh 2019-12-31 01:28:08 +01:00
ar71xx ar71xx: Remove mtd cfi_cmdset_0002 status check patch 2020-01-05 19:36:45 +01:00
arc770 arc770: gen_axs10x_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:27:32 +01:00
archs38 archs38: gen_axs10x_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:26:35 +01:00
armvirt treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
at91 at91: gen_at91_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:25:44 +01:00
ath25 ath25: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
ath79 ath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP 2020-01-12 14:12:50 +01:00
bcm53xx bcm53xx: sysupgrade: support Luxul NAND devices 2019-10-15 20:23:04 +02:00
brcm47xx brcm47xx: add switch configuration for WNR3500L 2019-12-08 00:21:36 +01:00
brcm63xx kernel: bump 4.19 to 4.19.85 2019-11-22 16:56:46 +01:00
brcm2708 kernel: bump 4.19 to 4.19.93 2020-01-05 00:43:36 +01:00
cns3xxx kernel: bump 4.19 to 4.19.86 2019-11-29 09:59:49 +01:00
gemini gemini: dns313_gen_hdd_img.sh: switch to /bin/sh 2019-12-31 01:23:24 +01:00
generic generic: update config-4.19 2020-01-12 14:12:50 +01:00
imx6 kernel: Deactivate CONFIG_SFP in generic config 2019-12-23 15:25:36 +01:00
ipq40xx ipq40xx: build DEVICE_DTS based on SOC and device name 2019-12-27 18:00:15 +01:00
ipq806x ipq806x: refresh kernel patches 2020-01-08 14:33:03 +01:00
kirkwood kirkwood: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:20 +01:00
lantiq lantiq: use shared code for LED migration 2020-01-03 00:07:00 +01:00
layerscape kernel: bump 4.14 to 4.14.162 2020-01-05 00:43:33 +01:00
malta treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
mediatek kernel: bump 4.14 to 4.14.161 2020-01-04 00:45:58 +01:00
mpc85xx treewide: move mktplinkfw to tplink-v1-image in image-commands.mk 2020-01-08 16:15:29 +01:00
mvebu mvebu: split interface configuration for clearfog pro and base 2019-12-31 02:30:08 +01:00
mxs mxs: gen_sdcard_ext4_ext4.sh: use /bin/sh 2019-12-31 01:19:48 +01:00
octeon octeon: fix sysupgrade 2019-11-30 20:19:12 +02:00
octeontx kernel: bump 4.14 to 4.14.160 2019-12-24 17:45:54 +01:00
omap omap: gen_omap_sdcard_img.sh: use /bin/sh 2019-12-31 01:17:09 +01:00
oxnas kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
pistachio pistachio: split up DEVICE_TITLE 2019-10-12 23:37:00 +02:00
ramips ramips: add support for TP-Link Archer C20 v5 2020-01-09 17:33:57 +01:00
rb532 rb532: gen_image.sh: use /bin/sh 2019-12-31 01:16:17 +01:00
samsung samsung: add subtarget condition for device 2020-01-03 00:04:22 +01:00
sunxi sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20 2020-01-03 15:05:36 -08:00
tegra x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATURE 2019-11-11 16:37:13 +01:00
uml treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
x86 kernel: bump 4.19 to 4.19.90 2019-12-24 15:34:43 +01:00
zynq zynq: gen_zynq_sdcard_img.sh: switch to /bin/sh 2019-12-31 01:14:48 +01:00
Makefile