mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
eadb1a9437
Itus Networks Shield - 1Ghz dual-core mips64 / Cavium Octeon 3 SoC, 1Gb RAM, 4Gb eMMC,3 GbE 10/100/1000 ports Information regarding device can be found: https://deviwiki.com/wiki/Itus_Networks_Shield_Pro Installing OpenWrt on Itus Networks Shield: 1) Boot Shield 2) On device: mount /dev/mmcblk1p1 /mnt 3) scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusrouterImage 3a) Optionally: scp openwrt-octeon-itus,shield-router-initramfs-kernel.bin to /mnt/ItusgatewayImage to allow you to have an emergency recovery boot in the GATEWAY slot - this slot will have no permament storage and is used for emergency recovery only when booted in the (G)ateway position 4) On device: umount /mnt 5) reboot Once booted, run the sysupgrade via cli or luCi on the openwrt-octeon-itus,shield-router-squashfs-sysupgrade.tar file the mode you are running. Once rebooted, the system installation is complete. Your storage partition for the mode is inialized and set. Signed-off-by: Donald Hoskins <grommish@gmail.com> [cut out sysupgrade-* changes, move a few lines, drop case CVMX_BOARD_TYPE_ITUS_SHIELD] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
36 lines
523 B
Plaintext
36 lines
523 B
Plaintext
do_sysinfo_octeon() {
|
|
local machine
|
|
local name
|
|
|
|
machine=$(grep "^system type" /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g")
|
|
|
|
case "$machine" in
|
|
"UBNT_E100"*)
|
|
name="erlite"
|
|
;;
|
|
|
|
"UBNT_E200"*)
|
|
name="er"
|
|
;;
|
|
|
|
"UBNT_E220"*)
|
|
name="erpro"
|
|
;;
|
|
|
|
"ITUS_SHIELD"*)
|
|
name="itus,shield-router"
|
|
;;
|
|
|
|
*)
|
|
name="generic"
|
|
;;
|
|
esac
|
|
|
|
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
|
|
|
|
echo "$name" > /tmp/sysinfo/board_name
|
|
echo "$machine" > /tmp/sysinfo/model
|
|
}
|
|
|
|
boot_hook_add preinit_main do_sysinfo_octeon
|