mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
84 lines
2.8 KiB
Diff
84 lines
2.8 KiB
Diff
From a6048e36f5e5d73a29d1f5096fc77286f8aa949d Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Thu, 11 Jun 2020 18:34:16 +0100
|
|
Subject: [PATCH] media: i2c: imx290: Add H and V flip controls
|
|
|
|
The sensor supports horizontal and vertical flips, so support them
|
|
through V4L2_CID_HFLIP and V4L2_CID_VFLIP.
|
|
|
|
This sensor does NOT change the Bayer order when changing the
|
|
direction of readout, therefore no special handling is required for
|
|
that.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/media/i2c/imx290.c | 22 ++++++++++++++++++++++
|
|
1 file changed, 22 insertions(+)
|
|
|
|
--- a/drivers/media/i2c/imx290.c
|
|
+++ b/drivers/media/i2c/imx290.c
|
|
@@ -34,6 +34,7 @@ enum imx290_clk_index {
|
|
#define IMX290_STANDBY 0x3000
|
|
#define IMX290_REGHOLD 0x3001
|
|
#define IMX290_XMSTA 0x3002
|
|
+#define IMX290_FLIP_WINMODE 0x3007
|
|
#define IMX290_FR_FDG_SEL 0x3009
|
|
#define IMX290_BLKLEVEL_LOW 0x300a
|
|
#define IMX290_BLKLEVEL_HIGH 0x300b
|
|
@@ -107,6 +108,8 @@ struct imx290 {
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *vblank;
|
|
+ struct v4l2_ctrl *hflip;
|
|
+ struct v4l2_ctrl *vflip;
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
struct mutex lock;
|
|
@@ -600,6 +603,7 @@ static int imx290_set_ctrl(struct v4l2_c
|
|
struct imx290 *imx290 = container_of(ctrl->handler,
|
|
struct imx290, ctrls);
|
|
int ret = 0;
|
|
+ u8 val;
|
|
|
|
/* V4L2 controls values will be applied only when power is already up */
|
|
if (!pm_runtime_get_if_in_use(imx290->dev))
|
|
@@ -618,6 +622,16 @@ static int imx290_set_ctrl(struct v4l2_c
|
|
case V4L2_CID_VBLANK:
|
|
ret = imx290_set_vmax(imx290, ctrl->val);
|
|
break;
|
|
+ case V4L2_CID_HFLIP:
|
|
+ case V4L2_CID_VFLIP:
|
|
+ /* WINMODE is in bits [6:4], so need to read-modify-write */
|
|
+ ret = imx290_read_reg(imx290, IMX290_FLIP_WINMODE, &val);
|
|
+ if (ret)
|
|
+ break;
|
|
+ val &= ~0x03;
|
|
+ val |= imx290->vflip->val | (imx290->hflip->val << 1);
|
|
+ ret = imx290_write_reg(imx290, IMX290_FLIP_WINMODE, val);
|
|
+ break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
if (ctrl->val) {
|
|
imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00);
|
|
@@ -924,6 +938,9 @@ static int imx290_set_stream(struct v4l2
|
|
imx290_stop_streaming(imx290);
|
|
pm_runtime_put(imx290->dev);
|
|
}
|
|
+ /* vflip and hflip cannot change during streaming */
|
|
+ __v4l2_ctrl_grab(imx290->vflip, enable);
|
|
+ __v4l2_ctrl_grab(imx290->hflip, enable);
|
|
|
|
unlock_and_return:
|
|
|
|
@@ -1217,6 +1234,11 @@ static int imx290_probe(struct i2c_clien
|
|
IMX290_EXPOSURE_STEP,
|
|
mode->vmax - 4);
|
|
|
|
+ imx290->hflip = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
|
|
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
+ imx290->vflip = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
|
|
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
+
|
|
imx290->link_freq =
|
|
v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|