openwrt/target/linux/bcm27xx/patches-5.4/950-0599-drm-vc4-Reset-audio-infoframe-on-encoder_enable-if-p.patch
Álvaro Fernández Rojas f07e572f64 bcm27xx: import latest patches from the RPi foundation
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-18 23:42:32 +01:00

73 lines
2.3 KiB
Diff

From 3e45488069e20b07b83d8cbba88c7fa2b205e559 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 25 Mar 2020 18:01:04 +0000
Subject: [PATCH] drm/vc4: Reset audio infoframe on encoder_enable if
previously streaming
If the encoder is disabled and re-enabled (eg mode change) all infoframes
are reset, whilst the audio subsystem know nothing about this change.
The driver therefore needs to reinstate the audio infoframe for
itself.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 12 ++++++++++++
drivers/gpu/drm/vc4/vc4_hdmi.h | 2 ++
2 files changed, 14 insertions(+)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -344,8 +344,16 @@ static void vc4_hdmi_set_audio_infoframe
static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
{
+ struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
+
vc4_hdmi_set_avi_infoframe(encoder);
vc4_hdmi_set_spd_infoframe(encoder);
+ /*
+ * If audio was streaming, then we need to reenabled the audio
+ * infoframe here during encoder_enable.
+ */
+ if (vc4_hdmi->audio.streaming)
+ vc4_hdmi_set_audio_infoframe(encoder);
}
static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
@@ -825,6 +833,7 @@ static void vc4_hdmi_audio_reset(struct
struct device *dev = &vc4_hdmi->pdev->dev;
int ret;
+ vc4_hdmi->audio.streaming = false;
ret = vc4_hdmi_stop_packet(encoder, HDMI_INFOFRAME_TYPE_AUDIO);
if (ret)
dev_err(dev, "Failed to stop audio infoframe: %d\n", ret);
@@ -928,6 +937,7 @@ static int vc4_hdmi_audio_trigger(struct
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
vc4_hdmi_set_audio_infoframe(encoder);
+ vc4_hdmi->audio.streaming = true;
if (vc4_hdmi->variant->phy_rng_enable)
vc4_hdmi->variant->phy_rng_enable(vc4_hdmi);
@@ -946,6 +956,8 @@ static int vc4_hdmi_audio_trigger(struct
if (vc4_hdmi->variant->phy_rng_disable)
vc4_hdmi->variant->phy_rng_disable(vc4_hdmi);
+ vc4_hdmi->audio.streaming = false;
+
break;
default:
break;
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -101,6 +101,8 @@ struct vc4_hdmi_audio {
int channels;
struct snd_dmaengine_dai_dma_data dma_data;
struct snd_pcm_substream *substream;
+
+ bool streaming;
};
/* General HDMI hardware state. */