openwrt/target/linux/brcm63xx/dts/bcm6368.dtsi
Jonas Gorski b50fd8c2b3 brcm63xx: register SPI controllers through DT
Register SPI controllers through device tree. We will wire up the clocks
at a later stage.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:43 +02:00

125 lines
2.4 KiB
Plaintext

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm6368";
aliases {
pflash = &pflash;
gpio0 = &gpio0;
gpio1 = &gpio1;
spi0 = &lsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
ubus@10000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
ext_intc0: interrupt-controller@10000018 {
compatible = "brcm,bcm6345-ext-intc";
reg = <0x10000018 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <20>, <21>, <22>, <23>;
};
ext_intc1: interrupt-controller@1000001c {
compatible = "brcm,bcm6345-ext-intc";
reg = <0x1000001c 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <24>, <25>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x10>,
<0x10000030 0x10>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
gpio1: gpio-controller@10000080 {
compatible = "brcm,bcm6345-gpio";
reg = <0x10000080 4>, <0x10000088 4>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <6>;
interrupts-extended = <&ext_intc1 0 0>,
<&ext_intc1 1 0>,
<&ext_intc0 0 0>,
<&ext_intc0 1 0>,
<&ext_intc0 2 0>,
<&ext_intc0 3 0>;
interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3",
"gpio4", "gpio5";
};
gpio0: gpio-controller@10000084 {
compatible = "brcm,bcm6345-gpio";
reg = <0x10000084 4>, <0x1000008c 4>;
gpio-controller;
#gpio-cells = <2>;
};
lsspi: spi@10000800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-spi";
reg = <0x10000800 0x70c>;
interrupts = <1>;
/* clocks = <&clkctl 9>; */
};
};
pflash: nor@18000000 {
compatible = "cfi-flash";
reg = <0x18000000 0x2000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
};