mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
c6ddf8d502
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
435 lines
9.7 KiB
Diff
435 lines
9.7 KiB
Diff
From 77d7427bed21c92d1c10e0cc9beabb5ce9bb6c0b Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Thu, 9 Apr 2020 12:46:13 +0100
|
|
Subject: [PATCH] dt: Implement an I2C pinctrl mux for BSC0.
|
|
|
|
BSC0 serves either the HAT EEPROM pins on the 40pin connector,
|
|
or the display and camera on a board specific pairing of either
|
|
GPIO 28&29, or 44&45.
|
|
|
|
Use I2C_MUX_PINCTRL to allow exposing both pairs of pins as I2C
|
|
busses.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2708-rpi-b.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2708-rpi-zero.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm270x-rpi.dtsi | 7 ++---
|
|
arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 9 ++++---
|
|
arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 10 ++++---
|
|
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 5 ++--
|
|
arch/arm/boot/dts/bcm2711.dtsi | 2 +-
|
|
.../boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi | 4 +++
|
|
.../boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi | 4 +++
|
|
arch/arm/boot/dts/bcm283x.dtsi | 26 ++++++++++++++++++-
|
|
16 files changed, 100 insertions(+), 39 deletions(-)
|
|
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi
|
|
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
|
|
@@ -68,12 +69,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-smsc9512.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-b", "brcm,bcm2835";
|
|
@@ -68,12 +69,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
@@ -3,6 +3,7 @@
|
|
#include "bcm2708-rpi-cm.dtsi"
|
|
#include "bcm283x-rpi-csi0-2lane.dtsi"
|
|
#include "bcm283x-rpi-csi1-4lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
|
|
@@ -67,12 +68,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
@@ -3,6 +3,7 @@
|
|
#include "bcm2708.dtsi"
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
@@ -116,12 +117,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-zero.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts
|
|
@@ -3,6 +3,7 @@
|
|
#include "bcm2708.dtsi"
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
|
|
@@ -71,12 +72,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2709-rpi.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
|
|
@@ -68,12 +69,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm270x-rpi.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm270x-rpi.dtsi
|
|
@@ -21,6 +21,7 @@
|
|
i2s = &i2s;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
+ i2c10 = &i2c_csi_dsi;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
spi2 = &spi2;
|
|
@@ -83,9 +84,9 @@
|
|
uart1 = <&uart1>,"status";
|
|
i2s = <&i2s>,"status";
|
|
spi = <&spi0>,"status";
|
|
- i2c0 = <&i2c0>,"status";
|
|
+ i2c0 = <&i2c0if>,"status",<&i2c0mux>,"status";
|
|
i2c1 = <&i2c1>,"status";
|
|
- i2c0_baudrate = <&i2c0>,"clock-frequency:0";
|
|
+ i2c0_baudrate = <&i2c0if>,"clock-frequency:0";
|
|
i2c1_baudrate = <&i2c1>,"clock-frequency:0";
|
|
|
|
audio = <&audio>,"status";
|
|
@@ -105,7 +106,7 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
-&i2c0 {
|
|
+&i2c0if {
|
|
status = "disabled";
|
|
};
|
|
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2709-rpi.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
|
|
@@ -68,12 +69,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2709-rpi.dtsi"
|
|
#include "bcm283x-rpi-lan7515.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
|
|
@@ -126,12 +127,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2709-rpi.dtsi"
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
|
|
@@ -137,12 +138,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
|
|
@@ -4,7 +4,7 @@
|
|
#include "bcm2709-rpi.dtsi"
|
|
#include "bcm283x-rpi-csi0-2lane.dtsi"
|
|
#include "bcm283x-rpi-csi1-4lane.dtsi"
|
|
-
|
|
+#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
/ {
|
|
compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
|
|
model = "Raspberry Pi Compute Module 3";
|
|
@@ -88,12 +88,14 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+};
|
|
+
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
@@ -192,6 +192,7 @@
|
|
|
|
#include "bcm2711-rpi.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
|
|
/delete-node/ &emmc2;
|
|
|
|
@@ -421,9 +422,7 @@
|
|
};
|
|
};
|
|
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
+&i2c0if {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
--- a/arch/arm/boot/dts/bcm2711.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm2711.dtsi
|
|
@@ -986,7 +986,7 @@
|
|
alloc-ranges = <0x0 0x00000000 0x40000000>;
|
|
};
|
|
|
|
-&i2c0 {
|
|
+&i2c0if {
|
|
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi
|
|
@@ -0,0 +1,4 @@
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_gpio0>;
|
|
+ pinctrl-1 = <&i2c0_gpio28>;
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi
|
|
@@ -0,0 +1,4 @@
|
|
+&i2c0mux {
|
|
+ pinctrl-0 = <&i2c0_gpio0>;
|
|
+ pinctrl-1 = <&i2c0_gpio44>;
|
|
+};
|
|
--- a/arch/arm/boot/dts/bcm283x.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm283x.dtsi
|
|
@@ -341,7 +341,7 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
- i2c0: i2c@7e205000 {
|
|
+ i2c0if: i2c@7e205000 {
|
|
compatible = "brcm,bcm2835-i2c";
|
|
reg = <0x7e205000 0x200>;
|
|
interrupts = <2 21>;
|
|
@@ -351,6 +351,30 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ i2c0mux: i2c0mux {
|
|
+ compatible = "i2c-mux-pinctrl";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ i2c-parent = <&i2c0if>;
|
|
+
|
|
+ pinctrl-names = "i2c0", "i2c_csi_dsi";
|
|
+
|
|
+ status = "disabled";
|
|
+
|
|
+ i2c0: i2c@0 {
|
|
+ reg = <0>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ };
|
|
+
|
|
+ i2c_csi_dsi: i2c@1 {
|
|
+ reg = <1>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ };
|
|
+ };
|
|
+
|
|
dpi: dpi@7e208000 {
|
|
compatible = "brcm,bcm2835-dpi";
|
|
reg = <0x7e208000 0x8c>;
|