mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
174ce4c56d
These are patches queued for 4.11. It adds support for even more hw and removes some annoying WARN_ONCE. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
188 lines
8.4 KiB
Diff
188 lines
8.4 KiB
Diff
From 05aba5763dcf35eddc58aaf99c9f16d19730e0a8 Mon Sep 17 00:00:00 2001
|
|
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
|
|
Date: Thu, 27 Oct 2016 11:55:39 +0200
|
|
Subject: [PATCH] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address
|
|
op codes
|
|
|
|
This patch renames the SPINOR_OP_* macros of the 4-byte address
|
|
instruction set so the new names all share a common pattern: the 4-byte
|
|
address name is built from the 3-byte address name appending the "_4B"
|
|
suffix.
|
|
|
|
The patch also introduces new op codes to support other SPI protocols such
|
|
as SPI 1-4-4 and SPI 1-2-2.
|
|
|
|
This is a transitional patch and will help a later patch of spi-nor.c
|
|
to automate the translation from the 3-byte address op codes into their
|
|
4-byte address version.
|
|
|
|
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
|
|
Acked-by: Mark Brown <broonie@kernel.org>
|
|
Acked-by: Marek Vasut <marek.vasut@gmail.com>
|
|
---
|
|
drivers/mtd/devices/serial_flash_cmds.h | 7 -------
|
|
drivers/mtd/devices/st_spi_fsm.c | 28 ++++++++++++++--------------
|
|
drivers/mtd/spi-nor/spi-nor.c | 8 ++++----
|
|
drivers/spi/spi-bcm-qspi.c | 6 +++---
|
|
include/linux/mtd/spi-nor.h | 22 ++++++++++++++++------
|
|
5 files changed, 37 insertions(+), 34 deletions(-)
|
|
|
|
--- a/drivers/mtd/devices/serial_flash_cmds.h
|
|
+++ b/drivers/mtd/devices/serial_flash_cmds.h
|
|
@@ -18,19 +18,12 @@
|
|
#define SPINOR_OP_RDVCR 0x85
|
|
|
|
/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
|
|
-#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */
|
|
-#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */
|
|
-
|
|
#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */
|
|
#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
|
|
#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
|
|
#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
|
|
#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
|
|
|
|
-/* READ commands with 32-bit addressing */
|
|
-#define SPINOR_OP_READ4_1_2_2 0xbc
|
|
-#define SPINOR_OP_READ4_1_4_4 0xec
|
|
-
|
|
/* Configuration flags */
|
|
#define FLASH_FLAG_SINGLE 0x000000ff
|
|
#define FLASH_FLAG_READ_WRITE 0x00000001
|
|
--- a/drivers/mtd/devices/st_spi_fsm.c
|
|
+++ b/drivers/mtd/devices/st_spi_fsm.c
|
|
@@ -507,13 +507,13 @@ static struct seq_rw_config n25q_read3_c
|
|
* - 'FAST' variants configured for 8 dummy cycles (see note above.)
|
|
*/
|
|
static struct seq_rw_config n25q_read4_configs[] = {
|
|
- {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
|
|
- {0x00, 0, 0, 0, 0, 0x00, 0, 0},
|
|
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0},
|
|
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
|
|
};
|
|
|
|
/*
|
|
@@ -553,13 +553,13 @@ static int stfsm_mx25_en_32bit_addr_seq(
|
|
* entering a state that is incompatible with the SPIBoot Controller.
|
|
*/
|
|
static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
|
|
- {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4},
|
|
- {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0},
|
|
- {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
|
|
- {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
|
|
- {0x00, 0, 0, 0, 0, 0x00, 0, 0},
|
|
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 2, 4},
|
|
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 4, 0},
|
|
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8},
|
|
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0},
|
|
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
|
|
};
|
|
|
|
static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
|
|
--- a/drivers/mtd/spi-nor/spi-nor.c
|
|
+++ b/drivers/mtd/spi-nor/spi-nor.c
|
|
@@ -1625,16 +1625,16 @@ int spi_nor_scan(struct spi_nor *nor, co
|
|
/* Dedicated 4-byte command set */
|
|
switch (nor->flash_read) {
|
|
case SPI_NOR_QUAD:
|
|
- nor->read_opcode = SPINOR_OP_READ4_1_1_4;
|
|
+ nor->read_opcode = SPINOR_OP_READ_1_1_4_4B;
|
|
break;
|
|
case SPI_NOR_DUAL:
|
|
- nor->read_opcode = SPINOR_OP_READ4_1_1_2;
|
|
+ nor->read_opcode = SPINOR_OP_READ_1_1_2_4B;
|
|
break;
|
|
case SPI_NOR_FAST:
|
|
- nor->read_opcode = SPINOR_OP_READ4_FAST;
|
|
+ nor->read_opcode = SPINOR_OP_READ_FAST_4B;
|
|
break;
|
|
case SPI_NOR_NORMAL:
|
|
- nor->read_opcode = SPINOR_OP_READ4;
|
|
+ nor->read_opcode = SPINOR_OP_READ_4B;
|
|
break;
|
|
}
|
|
nor->program_opcode = SPINOR_OP_PP_4B;
|
|
--- a/drivers/spi/spi-bcm-qspi.c
|
|
+++ b/drivers/spi/spi-bcm-qspi.c
|
|
@@ -371,7 +371,7 @@ static int bcm_qspi_bspi_set_flex_mode(s
|
|
/* default mode, does not need flex_cmd */
|
|
flex_mode = 0;
|
|
else
|
|
- command = SPINOR_OP_READ4_FAST;
|
|
+ command = SPINOR_OP_READ_FAST_4B;
|
|
break;
|
|
case SPI_NBITS_DUAL:
|
|
bpc = 0x00000001;
|
|
@@ -384,7 +384,7 @@ static int bcm_qspi_bspi_set_flex_mode(s
|
|
} else {
|
|
command = SPINOR_OP_READ_1_1_2;
|
|
if (spans_4byte)
|
|
- command = SPINOR_OP_READ4_1_1_2;
|
|
+ command = SPINOR_OP_READ_1_1_2_4B;
|
|
}
|
|
break;
|
|
case SPI_NBITS_QUAD:
|
|
@@ -399,7 +399,7 @@ static int bcm_qspi_bspi_set_flex_mode(s
|
|
} else {
|
|
command = SPINOR_OP_READ_1_1_4;
|
|
if (spans_4byte)
|
|
- command = SPINOR_OP_READ4_1_1_4;
|
|
+ command = SPINOR_OP_READ_1_1_4_4B;
|
|
}
|
|
break;
|
|
default:
|
|
--- a/include/linux/mtd/spi-nor.h
|
|
+++ b/include/linux/mtd/spi-nor.h
|
|
@@ -43,9 +43,13 @@
|
|
#define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */
|
|
#define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */
|
|
#define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */
|
|
-#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */
|
|
-#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */
|
|
+#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */
|
|
+#define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */
|
|
+#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */
|
|
+#define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */
|
|
#define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
|
|
+#define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */
|
|
+#define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */
|
|
#define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */
|
|
#define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
|
|
#define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */
|
|
@@ -56,11 +60,17 @@
|
|
#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
|
|
|
|
/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
|
|
-#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */
|
|
-#define SPINOR_OP_READ4_FAST 0x0c /* Read data bytes (high frequency) */
|
|
-#define SPINOR_OP_READ4_1_1_2 0x3c /* Read data bytes (Dual SPI) */
|
|
-#define SPINOR_OP_READ4_1_1_4 0x6c /* Read data bytes (Quad SPI) */
|
|
+#define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */
|
|
+#define SPINOR_OP_READ_FAST_4B 0x0c /* Read data bytes (high frequency) */
|
|
+#define SPINOR_OP_READ_1_1_2_4B 0x3c /* Read data bytes (Dual Output SPI) */
|
|
+#define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */
|
|
+#define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */
|
|
+#define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */
|
|
#define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */
|
|
+#define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */
|
|
+#define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */
|
|
+#define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */
|
|
+#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
|
|
#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
|
|
|
|
/* Used for SST flashes only. */
|