Daniel González Cabanelas 73ea763c0d ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC ... The Ubiquiti NanoBeam AC Gen1 XC (NBE-5AC-19) is an outdoor 802.11ac CPE with a waterproof casing (ultrasonically welded) and bulb shaped. Hardware: - SoC: Qualcomm Atheros QCA9558 - RAM: 128 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet: 1x GbE, AR8033 phy connected via SGMII - PSU: 24 Vdc passive PoE - WiFi 5 GHz: Qualcomm Atheros QCA988X - Buttons: 1x reset - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue - Internal antenna: 19 dBi planar Installation from stock airOS firmware: - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at https://openwrt.org/toh/ubiquiti/common Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>		2022-02-19 13:10:01 +01:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2020-09-28 16:23:03 +02:00
dts	ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC	2022-02-19 13:10:01 +01:00
files	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
generic	ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC	2022-02-19 13:10:01 +01:00
image	ath79: Add support for Ubiquiti NanoBeam AC Gen1 XC	2022-02-19 13:10:01 +01:00
mikrotik	ath79: add support for Mikrotik LHG 5	2022-02-07 00:03:27 +01:00
nand	ath79: support ZTE MF286	2022-02-05 12:14:08 +01:00
patches-5.10	kernel: bump 5.10 to 5.10.98	2022-02-11 23:17:40 +01:00
tiny	ath79: consolidate testing kernel	2021-04-10 19:28:04 +02:00
config-5.10	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
Makefile	ath79: switch to Kernel 5.10	2021-12-21 21:38:52 +01:00
modules.mk