openwrt/target/linux/ramips/dts/Newifi-D2.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

164 lines
2.6 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "d-team,newifi-d2", "mediatek,mt7621-soc";
model = "Newifi-D2";
aliases {
led-status = &led_power_blue;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
power-amber {
label = "newifi-d2:amber:power";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
led_power_blue: power-blue {
label = "newifi-d2:blue:power";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
internet-amber {
label = "newifi-d2:amber:internet";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
};
internet-blue {
label = "newifi-d2:blue:internet";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "newifi-d2:blue:wlan2g";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "newifi-d2:blue:wlan5g";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
usb {
label = "newifi-d2:blue:usb";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_usb3 {
gpio-export,name = "power_usb3";
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uart2", "uart3";
ralink,function = "gpio";
};
};
};