mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
51 lines
2.3 KiB
Diff
51 lines
2.3 KiB
Diff
From ae5bd19ff96560fb75a75c7d2374bed60bbd9669 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Thu, 11 Nov 2021 10:24:02 +0000
|
|
Subject: [PATCH] overlays: Additional parameters for gpio-poweroff
|
|
|
|
The gpio-poweroff driver supports active-delay-ms and inactive-delay-ms
|
|
properties. Add parameters to set these parameters - active_delay_ms
|
|
and inactive_delay_ms.
|
|
|
|
See: https://forums.raspberrypi.com/viewtopic.php?t=323508
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 7 +++++++
|
|
arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts | 2 ++
|
|
2 files changed, 9 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1155,6 +1155,11 @@ Info: Drives a GPIO high or low on pow
|
|
or reboot). This also disables the ability to trigger a boot by driving
|
|
GPIO3 low.
|
|
|
|
+ The GPIO starts in an inactive state. At poweroff time it is driven
|
|
+ active for 100ms, then inactive for 100ms, then active again. It is
|
|
+ safe to remove the power at any point after the initial activation of
|
|
+ the GPIO.
|
|
+
|
|
Users of this overlay are required to provide an external mechanism to
|
|
switch off the power supply when signalled - failure to do so results
|
|
in a kernel BUG, increased power consumption and undefined behaviour.
|
|
@@ -1170,6 +1175,8 @@ Params: gpiopin GPIO for
|
|
input Set if the gpio pin should be configured as
|
|
an input.
|
|
export Set to export the configured pin to sysfs
|
|
+ active_delay_ms Initial GPIO active period (default 100)
|
|
+ inactive_delay_ms Subsequent GPIO inactive period (default 100)
|
|
timeout_ms Specify (in ms) how long the kernel waits for
|
|
power-down before issuing a WARN (default 3000).
|
|
|
|
--- a/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts
|
|
@@ -33,5 +33,7 @@
|
|
input = <&power_ctrl>,"input?";
|
|
export = <&power_ctrl>,"export?";
|
|
timeout_ms = <&power_ctrl>,"timeout-ms:0";
|
|
+ active_delay_ms = <&power_ctrl>,"active-delay-ms:0";
|
|
+ inactive_delay_ms = <&power_ctrl>,"inactive-delay-ms:0";
|
|
};
|
|
};
|