mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
3a974b5bcd
After the switch to pre-calibration, ath10k would fail to initialize the PCIE Wi-Fi on the GL-B200 as follows: ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000 [...] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200 from ath10k/QCA9888/hw2.0/board-2.bin ath10k_pci 0000:01:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0 ath10k_pci 0000:01:00.0: failed to fetch board file: -12 ath10k_pci 0000:01:00.0: could not probe fw (-12) Repackage the BDF file after renaming relevant fields and files to allow for the Wi-Fi interface to start again. Fixes: |
||
---|---|---|
.. | ||
ath10k-ct-firmware | ||
b43legacy-firmware | ||
cypress-firmware | ||
cypress-nvram | ||
intel-microcode | ||
ipq-wifi | ||
lantiq/dsl-vrx200-firmware-xdsl | ||
layerscape | ||
linux-firmware | ||
prism54-firmware | ||
wireless-regdb |