INAGAKI Hiroshi b3ca1f30ef ramips: add support for ELECOM WRC-1750GST2 ... ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G) - WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX, from ethernet port side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-1750GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex)) WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex)) 2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex)) 5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2021-03-21 22:45:20 +01:00
..
imagebuilder	build,ib: add STRIP_ABI option for manifest	2021-03-16 11:00:08 -10:00
linux	ramips: add support for ELECOM WRC-1750GST2	2021-03-21 22:45:20 +01:00
sdk	sdk: expose binary strip settings	2021-02-20 01:29:36 +01:00
toolchain	target: fix copying of licenses for SDK/toolchain	2021-02-14 21:56:29 +01:00
Config.in	include/image*: add support for device-tree overlays	2021-03-17 17:45:34 +00:00
Makefile