mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
d3a337a592
* updated SNAND/SNFI driver brings support for MT7981 * add support for MediaTek NAND Memory bad Block Management (NMBM) (not used for any boards atm, but could be useful in future) * wire up NMBM support for MT7622, MT7629, MT7981 and MT7986 * replace some local patches with updated version from SDK * bring some legacy precompiler symbols which haven't been converted into Kconfig symbols in U-Boot 2022.07, remove when bumbping to U-Boot 2022.10: 100-28-include-configs-mt7986-h-from-SDK.patch Source: https://github.com/mtk-openwrt/u-boot Signed-off-by: Daniel Golle <daniel@makrotopia.org>
1119 lines
25 KiB
Diff
1119 lines
25 KiB
Diff
From 88271cb3ae9c68dc200d627653df96fc557c2a64 Mon Sep 17 00:00:00 2001
|
|
From: Weijie Gao <weijie.gao@mediatek.com>
|
|
Date: Mon, 25 Jul 2022 10:55:35 +0800
|
|
Subject: [PATCH 47/71] cmd: add a new command for NAND flash debugging
|
|
|
|
Add a command 'nand-ext' for NAND flash debugging:
|
|
- Dump a page with oob, with optional raw read support
|
|
- Display all bad blocks
|
|
- Mark a block as bad block
|
|
- Set a bitflip on a page
|
|
- Erase
|
|
- Read / write data from/to any offset with any size
|
|
- Read / write pages with oob
|
|
- Erase, read and write support skip bad block or forced mode, support
|
|
raw mode, supporot auto-oob mode
|
|
- Supports operating on a specific partition
|
|
- No need to specify NAND device name
|
|
|
|
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
|
|
---
|
|
cmd/Kconfig | 8 +
|
|
cmd/Makefile | 1 +
|
|
cmd/nand-ext.c | 1062 ++++++++++++++++++++++++++++++++++++++++++++++++
|
|
3 files changed, 1071 insertions(+)
|
|
create mode 100644 cmd/nand-ext.c
|
|
|
|
--- a/cmd/Kconfig
|
|
+++ b/cmd/Kconfig
|
|
@@ -1260,6 +1260,14 @@ config CMD_NAND_TORTURE
|
|
|
|
endif # CMD_NAND
|
|
|
|
+config CMD_NAND_EXT
|
|
+ bool "nand - extended nand utility for debugging"
|
|
+ depends on !CMD_NAND
|
|
+ default y if MTD_RAW_NAND || MTD_SPI_NAND || MTK_SPI_NAND
|
|
+ select MTD_PARTITIONS
|
|
+ help
|
|
+ NAND flash R/W and debugging support.
|
|
+
|
|
config CMD_NMBM
|
|
depends on NMBM_MTD
|
|
bool "nmbm"
|
|
--- a/cmd/Makefile
|
|
+++ b/cmd/Makefile
|
|
@@ -114,6 +114,7 @@ obj-y += legacy-mtd-utils.o
|
|
endif
|
|
obj-$(CONFIG_CMD_MUX) += mux.o
|
|
obj-$(CONFIG_CMD_NAND) += nand.o
|
|
+obj-$(CONFIG_CMD_NAND_EXT) += nand-ext.o
|
|
obj-$(CONFIG_CMD_NMBM) += nmbm.o
|
|
obj-$(CONFIG_CMD_NET) += net.o
|
|
obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
|
|
--- /dev/null
|
|
+++ b/cmd/nand-ext.c
|
|
@@ -0,0 +1,1062 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Copyright (C) 2021 MediaTek Inc. All Rights Reserved.
|
|
+ *
|
|
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
+ */
|
|
+
|
|
+#include <command.h>
|
|
+#include <stdbool.h>
|
|
+#include <malloc.h>
|
|
+#include <mtd.h>
|
|
+#include <dm/devres.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/mtd/mtd.h>
|
|
+
|
|
+static struct mtd_info *curr_dev;
|
|
+
|
|
+static void mtd_show_parts(struct mtd_info *mtd, int level)
|
|
+{
|
|
+ struct mtd_info *part;
|
|
+ int i;
|
|
+
|
|
+ list_for_each_entry(part, &mtd->partitions, node) {
|
|
+ for (i = 0; i < level; i++)
|
|
+ printf("\t");
|
|
+ printf(" - 0x%012llx-0x%012llx : \"%s\"\n",
|
|
+ part->offset, part->offset + part->size, part->name);
|
|
+
|
|
+ mtd_show_parts(part, level + 1);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void mtd_show_device(struct mtd_info *mtd)
|
|
+{
|
|
+ /* Device */
|
|
+ printf("* %s\n", mtd->name);
|
|
+#if defined(CONFIG_DM)
|
|
+ if (mtd->dev) {
|
|
+ printf(" - device: %s\n", mtd->dev->name);
|
|
+ printf(" - parent: %s\n", mtd->dev->parent->name);
|
|
+ printf(" - driver: %s\n", mtd->dev->driver->name);
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ /* MTD device information */
|
|
+ printf(" - type: ");
|
|
+ switch (mtd->type) {
|
|
+ case MTD_NANDFLASH:
|
|
+ printf("NAND flash\n");
|
|
+ break;
|
|
+ case MTD_MLCNANDFLASH:
|
|
+ printf("MLC NAND flash\n");
|
|
+ break;
|
|
+ case MTD_ABSENT:
|
|
+ default:
|
|
+ printf("Not supported\n");
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ printf(" - block size: 0x%x bytes\n", mtd->erasesize);
|
|
+ printf(" - page size: 0x%x bytes\n", mtd->writesize);
|
|
+ printf(" - OOB size: %u bytes\n", mtd->oobsize);
|
|
+ printf(" - OOB available: %u bytes\n", mtd->oobavail);
|
|
+
|
|
+ if (mtd->ecc_strength) {
|
|
+ printf(" - ECC strength: %u bits\n", mtd->ecc_strength);
|
|
+ printf(" - ECC step size: %u bytes\n", mtd->ecc_step_size);
|
|
+ printf(" - bitflip threshold: %u bits\n",
|
|
+ mtd->bitflip_threshold);
|
|
+ }
|
|
+
|
|
+ printf(" - 0x%012llx-0x%012llx : \"%s\"\n",
|
|
+ mtd->offset, mtd->offset + mtd->size, mtd->name);
|
|
+
|
|
+ /* MTD partitions, if any */
|
|
+ mtd_show_parts(mtd, 1);
|
|
+}
|
|
+
|
|
+static int do_nand_list(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd;
|
|
+ int dev_nb = 0;
|
|
+
|
|
+ /* Ensure all devices (and their partitions) are probed */
|
|
+ mtd_probe_devices();
|
|
+
|
|
+ printf("List of NAND devices:\n");
|
|
+ mtd_for_each_device(mtd) {
|
|
+ if (mtd->type != MTD_NANDFLASH && mtd->type != MTD_MLCNANDFLASH)
|
|
+ continue;
|
|
+
|
|
+ if (!mtd_is_partition(mtd))
|
|
+ mtd_show_device(mtd);
|
|
+
|
|
+ dev_nb++;
|
|
+ }
|
|
+
|
|
+ if (!dev_nb)
|
|
+ printf("No NAND MTD device found\n");
|
|
+
|
|
+ return CMD_RET_SUCCESS;
|
|
+}
|
|
+
|
|
+static struct mtd_info *nand_get_curr_dev(void)
|
|
+{
|
|
+ struct mtd_info *mtd, *first_dev = NULL;
|
|
+ int err, dev_nb = 0;
|
|
+
|
|
+ if (curr_dev) {
|
|
+ mtd = get_mtd_device(curr_dev, -1);
|
|
+ if (!IS_ERR_OR_NULL(mtd)) {
|
|
+ __put_mtd_device(mtd);
|
|
+ return mtd;
|
|
+ }
|
|
+
|
|
+ curr_dev = NULL;
|
|
+ }
|
|
+
|
|
+ /* Ensure all devices (and their partitions) are probed */
|
|
+ mtd_probe_devices();
|
|
+
|
|
+ mtd_for_each_device(mtd) {
|
|
+ if (mtd->type != MTD_NANDFLASH && mtd->type != MTD_MLCNANDFLASH)
|
|
+ continue;
|
|
+
|
|
+ if (!mtd_is_partition(mtd)) {
|
|
+ if (!first_dev)
|
|
+ first_dev = mtd;
|
|
+ dev_nb++;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (!dev_nb) {
|
|
+ printf("No NAND MTD device found\n");
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ if (dev_nb > 1) {
|
|
+ printf("No active NAND MTD device specified\n");
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ err = __get_mtd_device(first_dev);
|
|
+ if (err) {
|
|
+ printf("Failed to get MTD device '%s': err %d\n",
|
|
+ first_dev->name, err);
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ curr_dev = first_dev;
|
|
+
|
|
+ printf("'%s' is now active device\n", first_dev->name);
|
|
+
|
|
+ return curr_dev;
|
|
+}
|
|
+
|
|
+static struct mtd_info *nand_get_part(struct mtd_info *master,
|
|
+ const char *name)
|
|
+{
|
|
+ struct mtd_info *slave;
|
|
+
|
|
+ list_for_each_entry(slave, &master->partitions, node) {
|
|
+ if (!strcmp(slave->name, name))
|
|
+ return slave;
|
|
+ }
|
|
+
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+static int do_nand_info(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev();
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ mtd_show_device(mtd);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int do_nand_select(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd, *old;
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("MTD device name must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ mtd = get_mtd_device_nm(argv[1]);
|
|
+ if (!mtd) {
|
|
+ printf("MTD device '%s' not found\n", argv[1]);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (mtd_is_partition(mtd)) {
|
|
+ printf("Error: '%s' is a MTD partition\n", argv[1]);
|
|
+ __put_mtd_device(mtd);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (mtd->type != MTD_NANDFLASH && mtd->type != MTD_MLCNANDFLASH) {
|
|
+ printf("Error: '%s' is not a NAND device\n", argv[1]);
|
|
+ __put_mtd_device(mtd);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (mtd == curr_dev) {
|
|
+ __put_mtd_device(mtd);
|
|
+ return CMD_RET_SUCCESS;
|
|
+ }
|
|
+
|
|
+ if (curr_dev) {
|
|
+ old = get_mtd_device(curr_dev, -1);
|
|
+ if (!IS_ERR_OR_NULL(old)) {
|
|
+ __put_mtd_device(old);
|
|
+ __put_mtd_device(curr_dev);
|
|
+ }
|
|
+
|
|
+ curr_dev = NULL;
|
|
+ }
|
|
+
|
|
+ curr_dev = mtd;
|
|
+
|
|
+ printf("'%s' is now active device\n", curr_dev->name);
|
|
+
|
|
+ return CMD_RET_SUCCESS;
|
|
+}
|
|
+
|
|
+static void dump_buf(const u8 *data, size_t size, u64 addr)
|
|
+{
|
|
+ const u8 *p = data;
|
|
+ u32 i, chklen;
|
|
+
|
|
+ while (size) {
|
|
+ chklen = 16;
|
|
+ if (chklen > size)
|
|
+ chklen = (u32)size;
|
|
+
|
|
+ printf("%08llx: ", addr);
|
|
+
|
|
+ for (i = 0; i < chklen; i++) {
|
|
+ if (i && (i % 4 == 0))
|
|
+ printf(" ");
|
|
+
|
|
+ printf("%02x ", p[i]);
|
|
+ }
|
|
+
|
|
+ for (i = chklen; i < 16; i++) {
|
|
+ if (i && (i % 4 == 0))
|
|
+ printf(" ");
|
|
+
|
|
+ printf(" ");
|
|
+ }
|
|
+ printf(" ");
|
|
+
|
|
+ for (i = 0; i < chklen; i++) {
|
|
+ if (p[i] < 32 || p[i] >= 0x7f)
|
|
+ printf(".");
|
|
+ else
|
|
+ printf("%c", p[i]);
|
|
+ }
|
|
+ printf("\n");
|
|
+
|
|
+ p += chklen;
|
|
+ size -= chklen;
|
|
+ addr += chklen;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int do_nand_dump(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev();
|
|
+ struct mtd_oob_ops io_op = {};
|
|
+ bool raw = false;
|
|
+ int ret;
|
|
+ u64 off;
|
|
+ u8 *buf;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ if (strstr(argv[0], ".raw"))
|
|
+ raw = true;
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("Dump offset must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ off = simple_strtoull(argv[1], NULL, 0);
|
|
+ if (off >= mtd->size) {
|
|
+ printf("Offset 0x%llx is larger than flash size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ off &= ~(u64)mtd->writesize_mask;
|
|
+
|
|
+ buf = malloc(mtd->writesize + mtd->oobsize);
|
|
+ if (!buf) {
|
|
+ printf("Failed to allocate buffer\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ io_op.mode = raw ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
|
|
+ io_op.len = mtd->writesize;
|
|
+ io_op.datbuf = buf;
|
|
+ io_op.ooblen = mtd->oobsize;
|
|
+ io_op.oobbuf = buf + mtd->writesize;
|
|
+
|
|
+ ret = mtd_read_oob(mtd, off, &io_op);
|
|
+ if (ret < 0 && ret != -EUCLEAN && ret != -EBADMSG) {
|
|
+ printf("Failed to read page at 0x%llx, err %d\n", off, ret);
|
|
+ free(buf);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ printf("Dump of %spage at 0x%llx:\n", raw ? "raw " : "", off);
|
|
+ dump_buf(buf, mtd->writesize, off);
|
|
+
|
|
+ printf("\n");
|
|
+ printf("OOB:\n");
|
|
+ dump_buf(buf + mtd->writesize, mtd->oobsize, 0);
|
|
+
|
|
+ free(buf);
|
|
+
|
|
+ return CMD_RET_SUCCESS;
|
|
+}
|
|
+
|
|
+static int do_nand_bad(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev();
|
|
+ u64 off = 0;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ while (off < mtd->size) {
|
|
+ if (mtd_block_isbad(mtd, off))
|
|
+ printf("\t%08llx\n", off);
|
|
+
|
|
+ off += mtd->erasesize;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int do_nand_markbad(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev();
|
|
+ u64 off;
|
|
+ int ret;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("Missing address within a block to be marked bad\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ off = simple_strtoull(argv[1], NULL, 0);
|
|
+ if (off >= mtd->size) {
|
|
+ printf("Offset 0x%llx is larger than flash size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ off &= ~(u64)mtd->erasesize_mask;
|
|
+
|
|
+ ret = mtd_block_markbad(mtd, off);
|
|
+
|
|
+ if (!ret)
|
|
+ printf("Block at 0x%08llx has been marked bad\n", off);
|
|
+ else
|
|
+ printf("Failed to mark bad block at 0x%08llx\n", off);
|
|
+
|
|
+ return ret ? CMD_RET_FAILURE : CMD_RET_SUCCESS;
|
|
+}
|
|
+
|
|
+static int do_nand_bitflip(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev();
|
|
+ struct mtd_oob_ops io_op = {};
|
|
+ u32 col, bit;
|
|
+ bool res;
|
|
+ u64 off;
|
|
+ u8 *buf;
|
|
+ int ret;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("Missing address to generate bitflip\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ off = simple_strtoull(argv[1], NULL, 0);
|
|
+ if (off >= mtd->size) {
|
|
+ printf("Offset 0x%llx is larger than flash size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 3) {
|
|
+ printf("Missing column address\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ col = simple_strtoul(argv[2], NULL, 0);
|
|
+ if (col >= mtd->writesize + mtd->oobsize) {
|
|
+ printf("Column address must be less than %u\n",
|
|
+ mtd->writesize + mtd->oobsize);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 4) {
|
|
+ printf("Missing bit position\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ bit = simple_strtoul(argv[3], NULL, 0);
|
|
+ if (bit > 7) {
|
|
+ printf("Bit position must be less than 8\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ off &= ~(u64)mtd->writesize_mask;
|
|
+
|
|
+ buf = malloc(mtd->writesize + mtd->oobsize);
|
|
+ if (!buf) {
|
|
+ printf("Failed to allocate buffer\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ io_op.mode = MTD_OPS_RAW;
|
|
+ io_op.len = mtd->writesize;
|
|
+ io_op.datbuf = buf;
|
|
+ io_op.ooblen = mtd->oobsize;
|
|
+ io_op.oobbuf = buf + mtd->writesize;
|
|
+
|
|
+ ret = mtd_read_oob(mtd, off, &io_op);
|
|
+ if (ret < 0) {
|
|
+ printf("Failed to read page at 0x%llx, err %d\n", off, ret);
|
|
+ free(buf);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (!(buf[col] & (1 << bit))) {
|
|
+ printf("Bit %u at byte %u is already zero\n", bit, col);
|
|
+ free(buf);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ buf[col] &= ~(1 << bit);
|
|
+
|
|
+ memset(&io_op, 0, sizeof(io_op));
|
|
+ io_op.mode = MTD_OPS_RAW;
|
|
+ io_op.len = mtd->writesize;
|
|
+ io_op.datbuf = buf;
|
|
+ io_op.ooblen = mtd->oobsize;
|
|
+ io_op.oobbuf = buf + mtd->writesize;
|
|
+
|
|
+ ret = mtd_write_oob(mtd, off, &io_op);
|
|
+
|
|
+ if (ret < 0) {
|
|
+ printf("Failed to write page at 0x%llx, err %d\n", off, ret);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ memset(&io_op, 0, sizeof(io_op));
|
|
+ io_op.mode = MTD_OPS_RAW;
|
|
+ io_op.len = mtd->writesize;
|
|
+ io_op.datbuf = buf;
|
|
+ io_op.ooblen = mtd->oobsize;
|
|
+ io_op.oobbuf = buf + mtd->writesize;
|
|
+
|
|
+ ret = mtd_read_oob(mtd, off, &io_op);
|
|
+ if (ret < 0) {
|
|
+ printf("Failed to read page at 0x%llx, err %d\n", off, ret);
|
|
+ free(buf);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ res = (buf[col] & (1 << bit)) == 0;
|
|
+ free(buf);
|
|
+
|
|
+ if (res) {
|
|
+ printf("Bit %u at byte %u has been changed to 0\n", bit, col);
|
|
+ return CMD_RET_SUCCESS;
|
|
+ }
|
|
+
|
|
+ printf("Failed to change bit %u at byte %u to 0\n", bit, col);
|
|
+ return CMD_RET_FAILURE;
|
|
+}
|
|
+
|
|
+static int do_nand_erase(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev(), *part;
|
|
+ bool spread = false, force = false;
|
|
+ u64 off, size, end, limit;
|
|
+ struct erase_info ei;
|
|
+ char *ends;
|
|
+ int ret;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ if (strstr(argv[0], ".spread"))
|
|
+ spread = true;
|
|
+
|
|
+ if (strstr(argv[0], ".force"))
|
|
+ force = true;
|
|
+
|
|
+ if (spread && force) {
|
|
+ printf("spread and force must not be set at the same time\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("Erase start offset/partition must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ part = nand_get_part(mtd, argv[1]);
|
|
+ if (part) {
|
|
+ off = part->offset;
|
|
+
|
|
+ if (argc < 3)
|
|
+ size = part->size;
|
|
+ else
|
|
+ size = simple_strtoull(argv[2], NULL, 0);
|
|
+
|
|
+ if (size > part->size) {
|
|
+ printf("Erase end offset is larger than partition size\n");
|
|
+ printf("Erase size reduced to 0x%llx\n", part->size);
|
|
+
|
|
+ size = part->size;
|
|
+ }
|
|
+
|
|
+ limit = off + part->size;
|
|
+ } else {
|
|
+ off = simple_strtoull(argv[1], &ends, 0);
|
|
+
|
|
+ if (ends == argv[1] || *ends) {
|
|
+ printf("Partition '%s' not found\n", argv[1]);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (off >= mtd->size) {
|
|
+ printf("Offset 0x%llx is larger than flash size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 3) {
|
|
+ printf("Erase size offset must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ size = simple_strtoull(argv[2], NULL, 0);
|
|
+
|
|
+ if (off + size > mtd->size) {
|
|
+ printf("Erase end offset is larger than flash size\n");
|
|
+
|
|
+ size = mtd->size - off;
|
|
+ printf("Erase size reduced to 0x%llx\n", size);
|
|
+ }
|
|
+
|
|
+ limit = mtd->size;
|
|
+ }
|
|
+
|
|
+ end = off + size;
|
|
+ off &= ~(u64)mtd->erasesize_mask;
|
|
+ end = (end + mtd->erasesize_mask) & (~(u64)mtd->erasesize_mask);
|
|
+ size = end - off;
|
|
+
|
|
+ printf("Erasing from 0x%llx to 0x%llx, size 0x%llx ...\n",
|
|
+ off, end - 1, end - off);
|
|
+
|
|
+ while (size && off < limit) {
|
|
+ if (mtd_block_isbad(mtd, off)) {
|
|
+ printf("Bad block at 0x%llx", off);
|
|
+
|
|
+ if (spread) {
|
|
+ printf(" ... skipped\n");
|
|
+ off += mtd->erasesize;
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ if (!force) {
|
|
+ printf(" ... aborted\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ printf(" ... will be force erased\n");
|
|
+ }
|
|
+
|
|
+ memset(&ei, 0, sizeof(ei));
|
|
+
|
|
+ ei.mtd = mtd;
|
|
+ ei.addr = off;
|
|
+ ei.len = mtd->erasesize;
|
|
+ ei.scrub = force;
|
|
+
|
|
+ ret = mtd_erase(mtd, &ei);
|
|
+ if (ret) {
|
|
+ printf("Erase failed at 0x%llx\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ off += mtd->erasesize;
|
|
+ size -= mtd->erasesize;
|
|
+ }
|
|
+
|
|
+ printf("Succeeded\n");
|
|
+
|
|
+ return CMD_RET_SUCCESS;
|
|
+}
|
|
+
|
|
+static bool is_empty_page(const u8 *buf, size_t size)
|
|
+{
|
|
+ size_t i;
|
|
+
|
|
+ for (i = 0; i < size; i++) {
|
|
+ if (buf[i] != 0xff)
|
|
+ return false;
|
|
+ }
|
|
+
|
|
+ return true;
|
|
+}
|
|
+
|
|
+static int do_nand_io_normal(int argc, char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev(), *part;
|
|
+ bool spread = false, force = false, raw = false, writeff = false;
|
|
+ bool read = false, checkbad = true;
|
|
+ struct mtd_oob_ops io_op = {};
|
|
+ size_t size, padding, chksz;
|
|
+ uintptr_t addr;
|
|
+ u64 off, offp;
|
|
+ char *ends;
|
|
+ u8 *buf;
|
|
+ int ret;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ if (!strncmp(argv[0], "read", 4))
|
|
+ read = true;
|
|
+
|
|
+ if (strstr(argv[0], ".spread"))
|
|
+ spread = true;
|
|
+
|
|
+ if (strstr(argv[0], ".force"))
|
|
+ force = true;
|
|
+
|
|
+ if (strstr(argv[0], ".raw"))
|
|
+ raw = true;
|
|
+
|
|
+ if (strstr(argv[0], ".ff"))
|
|
+ writeff = true;
|
|
+
|
|
+ if (spread && force) {
|
|
+ printf("spread and force must not be set at the same time\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("Data address must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ addr = simple_strtoul(argv[1], NULL, 0);
|
|
+
|
|
+ if (argc < 3) {
|
|
+ printf("Flash address/partition must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ part = nand_get_part(mtd, argv[2]);
|
|
+ if (part) {
|
|
+ if (argc < 4) {
|
|
+ off = 0;
|
|
+ } else {
|
|
+ off = simple_strtoull(argv[3], NULL, 0);
|
|
+ if (off + part->offset >= part->size) {
|
|
+ printf("Offset is larger than partition size\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (argc < 5) {
|
|
+ size = part->size - off;
|
|
+ } else {
|
|
+ size = simple_strtoul(argv[4], NULL, 0);
|
|
+ if (off + size > part->size) {
|
|
+ printf("Data size is too large\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ off += part->offset;
|
|
+ } else {
|
|
+ off = simple_strtoull(argv[2], &ends, 0);
|
|
+
|
|
+ if (ends == argv[1] || *ends) {
|
|
+ printf("Partition '%s' not found\n", argv[2]);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (off >= mtd->size) {
|
|
+ printf("Offset 0x%llx is larger than flash size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 4) {
|
|
+ printf("Data size must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ size = simple_strtoul(argv[3], NULL, 0);
|
|
+ if (off + size > mtd->size) {
|
|
+ printf("Data size is too large\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ buf = malloc(mtd->writesize);
|
|
+ if (!buf) {
|
|
+ printf("Failed to allocate buffer\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ printf("%s from 0x%llx to 0x%llx, size 0x%zx ...\n",
|
|
+ read ? "Reading" : "Writing", off, off + size - 1, size);
|
|
+
|
|
+ while (size && off < mtd->size) {
|
|
+ if (checkbad || !(off & mtd->erasesize_mask)) {
|
|
+ offp = off & ~(u64)mtd->erasesize_mask;
|
|
+
|
|
+ if (mtd_block_isbad(mtd, offp)) {
|
|
+ printf("Bad block at 0x%llx", offp);
|
|
+
|
|
+ if (spread) {
|
|
+ printf(" ... skipped\n");
|
|
+ off += mtd->erasesize;
|
|
+ checkbad = true;
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ if (!force) {
|
|
+ printf(" ... aborted\n");
|
|
+ goto err_out;
|
|
+ }
|
|
+
|
|
+ printf(" ... continue\n");
|
|
+ }
|
|
+
|
|
+ checkbad = false;
|
|
+ }
|
|
+
|
|
+ padding = off & mtd->writesize_mask;
|
|
+ chksz = mtd->writesize - padding;
|
|
+ chksz = min_t(size_t, chksz, size);
|
|
+
|
|
+ offp = off & ~(u64)mtd->writesize_mask;
|
|
+
|
|
+ memset(&io_op, 0, sizeof(io_op));
|
|
+ io_op.mode = raw ? MTD_OPS_RAW : MTD_OPS_PLACE_OOB;
|
|
+ io_op.len = mtd->writesize;
|
|
+
|
|
+ if (chksz < mtd->writesize)
|
|
+ io_op.datbuf = buf;
|
|
+ else
|
|
+ io_op.datbuf = (void *)addr;
|
|
+
|
|
+ if (read) {
|
|
+ ret = mtd_read_oob(mtd, offp, &io_op);
|
|
+ if (ret && ret != -EUCLEAN && ret != -EBADMSG)
|
|
+ goto io_err;
|
|
+
|
|
+ if (chksz < mtd->writesize)
|
|
+ memcpy((void *)addr, buf + padding, chksz);
|
|
+ } else {
|
|
+ if (chksz < mtd->writesize) {
|
|
+ memset(buf, 0xff, mtd->writesize);
|
|
+ memcpy(buf + padding, (void *)addr, chksz);
|
|
+ }
|
|
+
|
|
+ if (is_empty_page(io_op.datbuf, io_op.len) && !writeff)
|
|
+ ret = 0;
|
|
+ else
|
|
+ ret = mtd_write_oob(mtd, offp, &io_op);
|
|
+
|
|
+ if (ret)
|
|
+ goto io_err;
|
|
+ }
|
|
+
|
|
+ size -= chksz;
|
|
+ addr += chksz;
|
|
+ off += chksz;
|
|
+ }
|
|
+
|
|
+ if (!size) {
|
|
+ printf("Succeeded\n");
|
|
+ ret = CMD_RET_SUCCESS;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ printf("0x%zx byte%s remained for %s\n", size, size > 1 ? "s" : "",
|
|
+ read ? "read" : "write");
|
|
+ goto err_out;
|
|
+
|
|
+io_err:
|
|
+ printf("%s error %d at 0x%llx\n", read ? "Read" : "Write", ret, offp);
|
|
+
|
|
+err_out:
|
|
+ ret = CMD_RET_FAILURE;
|
|
+
|
|
+out:
|
|
+ free(buf);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int do_nand_io_page(int argc, char *const argv[])
|
|
+{
|
|
+ struct mtd_info *mtd = nand_get_curr_dev(), *part;
|
|
+ bool spread = false, force = false, raw = false, autooob = false;
|
|
+ bool read = false, checkbad = true, writeff = false;
|
|
+ struct mtd_oob_ops io_op = {};
|
|
+ uintptr_t addr;
|
|
+ u64 off, offp;
|
|
+ char *ends;
|
|
+ u32 count;
|
|
+ int ret;
|
|
+
|
|
+ if (!mtd)
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+ if (!strncmp(argv[0], "read", 4))
|
|
+ read = true;
|
|
+
|
|
+ if (strstr(argv[0], ".spread"))
|
|
+ spread = true;
|
|
+
|
|
+ if (strstr(argv[0], ".force"))
|
|
+ force = true;
|
|
+
|
|
+ if (strstr(argv[0], ".raw"))
|
|
+ raw = true;
|
|
+
|
|
+ if (strstr(argv[0], ".auto"))
|
|
+ autooob = true;
|
|
+
|
|
+ if (spread && force) {
|
|
+ printf("spread and force must not be set at the same time\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (raw && autooob) {
|
|
+ printf("raw and auto must not be set at the same time\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (argc < 2) {
|
|
+ printf("Data address must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ addr = simple_strtoul(argv[1], NULL, 0);
|
|
+
|
|
+ if (argc < 3) {
|
|
+ printf("Flash address/partition must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ part = nand_get_part(mtd, argv[2]);
|
|
+ if (part) {
|
|
+ if (argc < 4) {
|
|
+ printf("Partition offset / page count must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ if (argc < 5) {
|
|
+ off = 0;
|
|
+
|
|
+ count = simple_strtoul(argv[3], NULL, 0);
|
|
+ if (part->offset + count * mtd->writesize > part->size) {
|
|
+ printf("Page count exceeds partition size\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+ } else {
|
|
+ off = simple_strtoull(argv[3], NULL, 0);
|
|
+ if (off >= part->size) {
|
|
+ printf("Offset 0x%llx is larger than partition size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ off &= ~(u64)mtd->writesize_mask;
|
|
+
|
|
+ count = simple_strtoul(argv[4], NULL, 0);
|
|
+ if (part->offset + off + count * mtd->writesize > part->size) {
|
|
+ printf("Page count exceeds partition size\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ off += part->offset;
|
|
+ } else {
|
|
+ off = simple_strtoull(argv[2], &ends, 0);
|
|
+
|
|
+ if (ends == argv[1] || *ends) {
|
|
+ printf("Partition '%s' not found\n", argv[2]);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ if (off >= mtd->size) {
|
|
+ printf("Offset 0x%llx is larger than flash size\n", off);
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ off &= ~(u64)mtd->writesize_mask;
|
|
+
|
|
+ if (argc < 4) {
|
|
+ printf("Page count must be specified\n");
|
|
+ return CMD_RET_USAGE;
|
|
+ }
|
|
+
|
|
+ count = simple_strtoul(argv[3], NULL, 0);
|
|
+ if (off + count * mtd->writesize > mtd->size) {
|
|
+ printf("Page count exceeds flash size\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ printf("%s from 0x%llx to 0x%llx (+%u), count %u ...\n",
|
|
+ read ? "Reading" : "Writing", off,
|
|
+ off + count * mtd->writesize - 1, mtd->oobsize, count);
|
|
+
|
|
+ while (count && off < mtd->size) {
|
|
+ if (checkbad || !(off & mtd->erasesize_mask)) {
|
|
+ offp = off & ~(u64)mtd->erasesize_mask;
|
|
+
|
|
+ if (mtd_block_isbad(mtd, offp)) {
|
|
+ printf("Bad block at 0x%llx", offp);
|
|
+
|
|
+ if (spread) {
|
|
+ printf(" ... skipped\n");
|
|
+ off += mtd->erasesize;
|
|
+ checkbad = true;
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ if (!force) {
|
|
+ printf(" ... aborted\n");
|
|
+ return CMD_RET_FAILURE;
|
|
+ }
|
|
+
|
|
+ printf(" ... continue\n");
|
|
+ }
|
|
+
|
|
+ checkbad = false;
|
|
+ }
|
|
+
|
|
+ memset(&io_op, 0, sizeof(io_op));
|
|
+
|
|
+ if (raw)
|
|
+ io_op.mode = MTD_OPS_RAW;
|
|
+ else if (autooob)
|
|
+ io_op.mode = MTD_OPS_AUTO_OOB;
|
|
+ else
|
|
+ io_op.mode = MTD_OPS_PLACE_OOB;
|
|
+
|
|
+ io_op.len = mtd->writesize;
|
|
+ io_op.ooblen = mtd->oobsize;
|
|
+ io_op.datbuf = (void *)addr;
|
|
+ io_op.oobbuf = io_op.datbuf + mtd->writesize;
|
|
+
|
|
+ if (read) {
|
|
+ ret = mtd_read_oob(mtd, off, &io_op);
|
|
+ if (ret && ret != -EUCLEAN && ret != -EBADMSG)
|
|
+ goto io_err;
|
|
+ } else {
|
|
+ if (is_empty_page((void *)addr, mtd->writesize + mtd->oobsize) && !writeff)
|
|
+ ret = 0;
|
|
+ else
|
|
+ ret = mtd_write_oob(mtd, off, &io_op);
|
|
+
|
|
+ if (ret)
|
|
+ goto io_err;
|
|
+ }
|
|
+
|
|
+ count--;
|
|
+ addr += mtd->writesize + mtd->oobsize;
|
|
+ off += mtd->writesize;
|
|
+ }
|
|
+
|
|
+ if (!count) {
|
|
+ printf("Succeeded\n");
|
|
+ return CMD_RET_SUCCESS;
|
|
+ }
|
|
+
|
|
+ printf("%u page%s remained for %s\n", count, count > 1 ? "s" : "",
|
|
+ read ? "read" : "write");
|
|
+ return CMD_RET_FAILURE;
|
|
+
|
|
+io_err:
|
|
+ printf("%s error %d at 0x%llx\n", read ? "Read" : "Write", ret, off);
|
|
+ return CMD_RET_FAILURE;
|
|
+}
|
|
+
|
|
+static int do_nand_io(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
+ char *const argv[])
|
|
+{
|
|
+ if (strstr(argv[0], ".oob"))
|
|
+ return do_nand_io_page(argc, argv);
|
|
+
|
|
+ return do_nand_io_normal(argc, argv);
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_SYS_LONGHELP
|
|
+static char nand_help_text[] =
|
|
+ "- NAND flash R/W and debugging utility\n"
|
|
+ "nand list\n"
|
|
+ "nand info - Show active NAND devices\n"
|
|
+ "nand select <name> - Select active NAND devices\n"
|
|
+ "nand dump[.raw] <off>\n"
|
|
+ "nand bad\n"
|
|
+ "nand markbad <off>\n"
|
|
+ "nand bitflip <off> <col> <bit>\n"
|
|
+ "nand erase[.spread|.force] [<off> <size>|<part> [<size>]]\n"
|
|
+ "nand read[.spread|.force][.raw] <addr> <off> <size>\n"
|
|
+ " <addr> <part> [<off> [<size>]]\n"
|
|
+ "nand write[.spread|.force][.raw][.ff] <addr> <off> <size>\n"
|
|
+ " <addr> <part> [<off> [<size>]]\n"
|
|
+ "nand read.oob[.spread|.force][.raw|.auto] <addr> <off> <count>\n"
|
|
+ " <addr> <part> [<off>] <count>\n"
|
|
+ "nand write.oob[.spread|.force][.raw|.auto][.ff] <addr> <off> <count>\n"
|
|
+ " <addr> <part> [<off>] <count>\n";
|
|
+#endif
|
|
+
|
|
+U_BOOT_CMD_WITH_SUBCMDS(nand, "NAND utility",
|
|
+ nand_help_text,
|
|
+ U_BOOT_SUBCMD_MKENT(list, 1, 0, do_nand_list),
|
|
+ U_BOOT_SUBCMD_MKENT(info, 1, 0, do_nand_info),
|
|
+ U_BOOT_SUBCMD_MKENT(select, 2, 0, do_nand_select),
|
|
+ U_BOOT_SUBCMD_MKENT(dump, 2, 0, do_nand_dump),
|
|
+ U_BOOT_SUBCMD_MKENT(bad, 1, 0, do_nand_bad),
|
|
+ U_BOOT_SUBCMD_MKENT(markbad, 2, 0, do_nand_markbad),
|
|
+ U_BOOT_SUBCMD_MKENT(bitflip, 4, 0, do_nand_bitflip),
|
|
+ U_BOOT_SUBCMD_MKENT(erase, 3, 0, do_nand_erase),
|
|
+ U_BOOT_SUBCMD_MKENT(read, 5, 0, do_nand_io),
|
|
+ U_BOOT_SUBCMD_MKENT(write, 5, 0, do_nand_io)
|
|
+);
|