mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
3f889418a5
There are two types of swapping the EEPROM data in the ath9k driver.
Before this series one type of swapping could not be used without the
other.
The first type of swapping looks at the "magic bytes" at the start of
the EEPROM data and performs swab16 on the EEPROM contents if needed.
The second type of swapping is EEPROM format specific and swaps
specific fields within the EEPROM itself (swab16, swab32 - depends on
the EEPROM format).
With this series the second part now looks at the EEPMISC register
inside the EEPROM, which uses a bit to indicate if the EEPROM data
is Big Endian (this is also done by the FreeBSD kernel).
This has a nice advantage: currently there are some out-of-tree hacks
(in OpenWrt and LEDE) where the EEPROM has a Big Endian header on a
Big Endian system (= no swab16 is performed) but the EEPROM itself
indicates that it's data is Little Endian. Until now the out-of-tree
code simply did a swab16 before passing the data to ath9k, so ath9k
first did the swab16 - this also enabled the format specific swapping.
These out-of-tree hacks are still working with the new logic, but it
is recommended to remove them. This implementation is based on a
discussion with Arnd Bergmann who raised concerns about the
robustness and portability of the swapping logic in the original OF
support patch review, see [0].
After a second round of patches (= v1 of this series) neither Arnd
Bergmann nor I were really happy with the complexity of the EEPROM
swapping logic. Based on a discussion (see [1] and [2]) we decided
that ath9k should use a defined format (specifying the endianness
of the data - I went with __le16 and __le32) when accessing the
EEPROM fields. A benefit of this is that we enable the EEPMISC based
swapping logic by default, just like the FreeBSD driver, see [3]. On
the devices which I have tested (see below) ath9k now works without
having to specify the "endian_check" field in ath9k_platform_data (or
a similar logic which could provide this via devicetree) as ath9k now
detects the endianness automatically. Only EEPROMs which are mangled
by some out-of-tree code still need the endian_check flag (or one can
simply remove that mangling from the out-of-tree code).
[0] http://www.spinics.net/lists/linux-wireless/msg152634.html
[1] https://marc.info/?l=linux-wireless&m=147250597503174&w=2
[2] https://marc.info/?l=linux-wireless&m=147254388611344&w=2
[3] 50719b56d9/sys/dev/ath/ath_hal/ah_eeprom_9287.c (L351)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
79 lines
2.9 KiB
Diff
79 lines
2.9 KiB
Diff
From e88ab4a2649d0fbf675193fb2c176f65375bdd2d Mon Sep 17 00:00:00 2001
|
|
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
Date: Mon, 3 Oct 2016 00:29:08 +0200
|
|
Subject: [v2 PATCH 2/7] ath9k: indicate that the AR9003 EEPROM template values
|
|
are little endian
|
|
|
|
The eepMisc field was not set explicitly. The default value of 0 means
|
|
that the values in the EEPROM (template) should be interpreted as little
|
|
endian. However, this is not clear until comparing the AR9003 code with
|
|
the other EEPROM formats.
|
|
To make the code easier to understand we explicitly state that the values
|
|
are little endian - there are no functional changes with this patch.
|
|
|
|
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
---
|
|
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 +++++-----
|
|
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 3 +++
|
|
2 files changed, 8 insertions(+), 5 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
|
|
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
|
|
@@ -53,7 +53,7 @@ static const struct ar9300_eeprom ar9300
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
- .eepMisc = 0,
|
|
+ .eepMisc = AR9300_EEPMISC_LITTLE_ENDIAN,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
@@ -631,7 +631,7 @@ static const struct ar9300_eeprom ar9300
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11A,
|
|
- .eepMisc = 0,
|
|
+ .eepMisc = AR9300_EEPMISC_LITTLE_ENDIAN,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
@@ -1210,7 +1210,7 @@ static const struct ar9300_eeprom ar9300
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
- .eepMisc = 0,
|
|
+ .eepMisc = AR9300_EEPMISC_LITTLE_ENDIAN,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
@@ -1789,7 +1789,7 @@ static const struct ar9300_eeprom ar9300
|
|
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
- .eepMisc = 0,
|
|
+ .eepMisc = AR9300_EEPMISC_LITTLE_ENDIAN,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
@@ -2367,7 +2367,7 @@ static const struct ar9300_eeprom ar9300
|
|
.txrxMask = 0x33, /* 4 bits tx and 4 bits rx */
|
|
.opCapFlags = {
|
|
.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
|
|
- .eepMisc = 0,
|
|
+ .eepMisc = AR9300_EEPMISC_LITTLE_ENDIAN,
|
|
},
|
|
.rfSilent = 0,
|
|
.blueToothOptions = 0,
|
|
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
|
|
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
|
|
@@ -69,6 +69,9 @@
|
|
#define AR9300_BASE_ADDR 0x3ff
|
|
#define AR9300_BASE_ADDR_512 0x1ff
|
|
|
|
+/* AR5416_EEPMISC_BIG_ENDIAN not set indicates little endian */
|
|
+#define AR9300_EEPMISC_LITTLE_ENDIAN 0
|
|
+
|
|
#define AR9300_OTP_BASE \
|
|
((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000)
|
|
#define AR9300_OTP_STATUS \
|