mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
ff7709d223
The "netgear,uimage" parser can be replaced by the generic parser using device specific openwrt,ih-magic and openwrt,ih-type properties. Device tree properties for the following devices have not been set, as they have been dropped from OpenWrt with the removal of the ar71xx target: FW_MAGIC_WNR2000V1 0x32303031 FW_MAGIC_WNR2000V4 0x32303034 FW_MAGIC_WNR1000V2_VC 0x31303030 FW_MAGIC_WPN824N 0x31313030 Tested-by: Sander Vanheule <sander@svanheule.net> # WNDR3700v2 Tested-by: Stijn Segers <foss@volatilesystems.org> # WNDR3700v1 Signed-off-by: Bjørn Mork <bjorn@mork.no>
57 lines
1.2 KiB
Plaintext
57 lines
1.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar7161_netgear_wndr.dtsi"
|
|
|
|
/ {
|
|
compatible = "netgear,wndr3700", "qca,ar7161";
|
|
model = "Netgear WNDR3700";
|
|
};
|
|
|
|
&partitions {
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x000000 0x050000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
label = "u-boot-env";
|
|
reg = <0x050000 0x020000>;
|
|
};
|
|
|
|
partition@70000 {
|
|
label = "firmware";
|
|
reg = <0x070000 0x780000>;
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
openwrt,ih-magic = <0x33373030>;
|
|
openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
|
|
};
|
|
|
|
art: partition@7f0000 {
|
|
label = "art";
|
|
reg = <0x7f0000 0x010000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
&ath9k1 {
|
|
/* The original WNDR3700(v1) variant have four antennae dedicated
|
|
* to the 5GHz radio as well. Again, two antennae are available for
|
|
* each chain to switch between. The following configuration is the
|
|
* default setting which taken from the vendor's wifi
|
|
* code for that radio.
|
|
*
|
|
* All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
|
|
* [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
|
|
*/
|
|
antenna-demux {
|
|
gpio-hog;
|
|
line-name = "fixed antenna group 2";
|
|
gpios = <6 GPIO_ACTIVE_LOW>,
|
|
<7 GPIO_ACTIVE_HIGH>,
|
|
<8 GPIO_ACTIVE_HIGH>,
|
|
<9 GPIO_ACTIVE_LOW>;
|
|
output-high;
|
|
};
|
|
};
|