ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 06:57:57 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
b370753fc4
openwrt/target/linux/realtek/image/rtl838x.mk
Pawel Dembicki b370753fc4 realtek: add support for HPE 1920-8g-poe+ 
Hardware information:
---------------------

- RTL8380 SoC
- 8 Gigabit RJ45 PoE ports (built-in RTL8218B)
- 2 SFP ports (built-in SerDes)
- RJ45 RS232 port on front panel
- 32 MiB NOR Flash
- 128 MiB DDR3 DRAM
- PT7A7514 watchdog
- PoE chips: Nuvoton M0516LDE + BCM59121

Known issues:
---------------------
- PoE LEDs are uncontrolled.

(Manual taken from f2f09bc002)
Booting initramfs image:
------------------------

- Prepare a FTP or TFTP server serving the OpenWrt initramfs image and
  connect the server to a switch port.

- Connect to the console port of the device and enter the extended
  boot menu by typing Ctrl+B when prompted.

- Choose the menu option "<3> Enter Ethernet SubMenu".

- Set network parameters via the option "<5> Modify Ethernet Parameter".
  Enter the FTP/TFTP filename as "Load File Name" ("Target File Name"
  can be left blank, it is not required for booting from RAM). Note that
  the configuration is saved on flash, so it only needs to be done once.

- Select "<1> Download Application Program To SDRAM And Run".

Initial installation:
---------------------

- Boot an initramfs image as described above, then use sysupgrade to
  install OpenWrt permanently. After initial installation, the
  bootloader needs to be configured to load the correct image file

- Enter the extended boot menu again and choose "<4> File Control",
  then select "<2> Set Application File type".

- Enter the number of the file "openwrt-kernel.bin" (should be 1), and
  use the option "<1> +Main" to select it as boot image.

- Choose "<0> Exit To Main Menu" and then "<1> Boot System".

NOTE: The bootloader on these devices can only boot from the VFS
filesystem which normally spans most of the flash. With OpenWrt, only
the first part of the firmware partition contains a valid filesystem,
the rest is used for rootfs. As the bootloader does not know about this,
you must not do any file operations in the bootloader, as this may
corrupt the OpenWrt installation (selecting the boot image is an
exception, as it only stores a flag in the bootloader data, but doesn't
write to the filesystem).

Example PoE config file (/etc/config/poe):
---------------------
config global
        option budget   '180'

config port
        option enable   '1'
        option id       '1'
        option name     'lan8'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '2'
        option name     'lan7'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '3'
        option name     'lan6'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '4'
        option name     'lan5'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '5'
        option name     'lan4'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '6'
        option name     'lan3'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '7'
        option name     'lan2'
        option poe_plus '1'
        option priority '2'
config port
        option enable   '1'
        option id       '8'
        option name     'lan1'
        option poe_plus '1'
        option priority '2'

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2023-07-15 17:05:58 +02:00

323 lines
7.1 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
include ./common.mk
define Device/allnet_all-sg8208m
SOC := rtl8382
IMAGE_SIZE := 7168k
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-SG8208M
UIMAGE_MAGIC := 0x00000006
UIMAGE_NAME := 2.2.2.0
endef
TARGET_DEVICES += allnet_all-sg8208m
define Device/apresia_aplgs120gtss
$(Device/cameo-fw)
SOC := rtl8382
IMAGE_SIZE := 14848k
DEVICE_VENDOR := APRESIA
DEVICE_MODEL := ApresiaLightGS120GT-SS
UIMAGE_MAGIC := 0x12345000
CAMEO_KERNEL_PART_SIZE := 1572864
CAMEO_KERNEL_PART := 3
CAMEO_ROOTFS_PART := 4
CAMEO_CUSTOMER_SIGNATURE := 2
CAMEO_BOARD_MODEL := APLGS120GTSS
CAMEO_BOARD_VERSION := 4
endef
TARGET_DEVICES += apresia_aplgs120gtss
define Device/d-link_dgs-1210-10mp-f
$(Device/d-link_dgs-1210)
SOC := rtl8380
DEVICE_MODEL := DGS-1210-10MP
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += d-link_dgs-1210-10mp-f
define Device/d-link_dgs-1210-10p
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-10P
DEVICE_PACKAGES += lua-rs232
endef
TARGET_DEVICES += d-link_dgs-1210-10p
define Device/d-link_dgs-1210-16
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-16
endef
TARGET_DEVICES += d-link_dgs-1210-16
define Device/d-link_dgs-1210-20
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-20
endef
TARGET_DEVICES += d-link_dgs-1210-20
define Device/d-link_dgs-1210-28
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28
endef
TARGET_DEVICES += d-link_dgs-1210-28
define Device/d-link_dgs-1210-28mp-f
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28MP
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += d-link_dgs-1210-28mp-f
# The "IMG-" uImage name allows flashing the iniramfs from the vendor Web UI.
# Avoided for sysupgrade, as the vendor FW would do an incomplete flash.
define Device/engenius_ews2910p
SOC := rtl8380
IMAGE_SIZE := 8192k
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EWS2910P
UIMAGE_MAGIC := 0x03802910
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
libdeflate-gzip | \
uImage gzip -n 'IMG-0.00.00-c0.0.00'
endef
TARGET_DEVICES += engenius_ews2910p
define Device/hpe_1920-8g
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G (JG920A)
H3C_DEVICE_ID := 0x00010023
endef
TARGET_DEVICES += hpe_1920-8g
define Device/hpe_1920-8g-poe
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G-PoE+ (JG922A)
H3C_DEVICE_ID := 0x00010025
endef
TARGET_DEVICES += hpe_1920-8g-poe
define Device/hpe_1920-16g
$(Device/hpe_1920)
SOC := rtl8382
DEVICE_MODEL := 1920-16G (JG923A)
H3C_DEVICE_ID := 0x00010026
endef
TARGET_DEVICES += hpe_1920-16g
define Device/hpe_1920-24g
$(Device/hpe_1920)
SOC := rtl8382
DEVICE_MODEL := 1920-24G (JG924A)
H3C_DEVICE_ID := 0x00010027
endef
TARGET_DEVICES += hpe_1920-24g
define Device/inaba_aml2-17gp
SOC := rtl8382
IMAGE_SIZE := 13504k
DEVICE_VENDOR := INABA
DEVICE_MODEL := Abaniact AML2-17GP
UIMAGE_MAGIC := 0x83800000
endef
TARGET_DEVICES += inaba_aml2-17gp
define Device/iodata_bsh-g24mb
SOC := rtl8382
IMAGE_SIZE := 13696k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := BSH-G24MB
UIMAGE_MAGIC := 0x83800013
endef
TARGET_DEVICES += iodata_bsh-g24mb
# "NGE" refers to the uImage magic
define Device/netgear_nge
KERNEL := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
SOC := rtl8380
IMAGE_SIZE := 14848k
UIMAGE_MAGIC := 0x4e474520
DEVICE_VENDOR := NETGEAR
endef
define Device/netgear_gs108t-v3
$(Device/netgear_nge)
DEVICE_MODEL := GS108T
DEVICE_VARIANT := v3
endef
TARGET_DEVICES += netgear_gs108t-v3
define Device/netgear_gs110tpp-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS110TPP
DEVICE_VARIANT := v1
endef
TARGET_DEVICES += netgear_gs110tpp-v1
define Device/netgear_gs308t-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS308T
DEVICE_VARIANT := v1
UIMAGE_MAGIC := 0x4e474335
endef
TARGET_DEVICES += netgear_gs308t-v1
define Device/netgear_gs310tp-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS310TP
DEVICE_VARIANT := v1
UIMAGE_MAGIC := 0x4e474335
DEVICE_PACKAGES += lua-rs232
endef
TARGET_DEVICES += netgear_gs310tp-v1
define Device/panasonic_m16eg-pn28160k
SOC := rtl8382
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M16eG
DEVICE_VARIANT := PN28160K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m16eg-pn28160k
define Device/panasonic_m24eg-pn28240k
SOC := rtl8382
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M24eG
DEVICE_VARIANT := PN28240K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m24eg-pn28240k
define Device/panasonic_m8eg-pn28080k
SOC := rtl8380
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M8eG
DEVICE_VARIANT := PN28080K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m8eg-pn28080k
define Device/tplink_sg2008p-v1
SOC := rtl8380
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := SG2008P
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-hwmon-tps23861
endef
TARGET_DEVICES += tplink_sg2008p-v1
define Device/tplink_sg2210p-v3
SOC := rtl8380
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := SG2210P
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-hwmon-tps23861
endef
TARGET_DEVICES += tplink_sg2210p-v3
define Device/zyxel_gs1900-10hp
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-10HP
ZYXEL_VERS := AAZI
endef
TARGET_DEVICES += zyxel_gs1900-10hp
define Device/zyxel_gs1900-16
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-16
ZYXEL_VERS := AAHJ
endef
TARGET_DEVICES += zyxel_gs1900-16
define Device/zyxel_gs1900-8
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8
ZYXEL_VERS := AAHH
endef
TARGET_DEVICES += zyxel_gs1900-8
define Device/zyxel_gs1900-8hp-v1
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8HP
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHI
DEVICE_PACKAGES += lua-rs232
endef
TARGET_DEVICES += zyxel_gs1900-8hp-v1
define Device/zyxel_gs1900-8hp-v2
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8HP
DEVICE_VARIANT := v2
ZYXEL_VERS := AAHI
DEVICE_PACKAGES += lua-rs232
endef
TARGET_DEVICES += zyxel_gs1900-8hp-v2
define Device/zyxel_gs1900-24-v1
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHL
endef
TARGET_DEVICES += zyxel_gs1900-24-v1
define Device/zyxel_gs1900-24e
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24E
ZYXEL_VERS := AAHK
endef
TARGET_DEVICES += zyxel_gs1900-24e
define Device/zyxel_gs1900-24hp-v1
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24HP
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHM
endef
TARGET_DEVICES += zyxel_gs1900-24hp-v1
define Device/zyxel_gs1900-24hp-v2
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24HP
DEVICE_VARIANT := v2
ZYXEL_VERS := ABTP
endef
TARGET_DEVICES += zyxel_gs1900-24hp-v2
Reference in New Issue View Git Blame Copy Permalink