mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
ec6293febc
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Manually rebased:
pending-5.4/611-netfilter_match_bypass_default_table.patch
The upstream change affecting this patch is the revert of an earlier
kernel commit. Therefore, we just revert our corresponding changes
in [1].
Build system: x86_64
Build-tested: ipq806x/R7800
[1] 9b1b89229f ("kernel: bump 5.4 to 5.4.86")
Signed-off-by: John Audia <graysky@archlinux.us>
[adjust manually rebased patch, add explanation]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
102 lines
3.5 KiB
Diff
102 lines
3.5 KiB
Diff
From a1126887f068def0bc11f5260e55e25b9c03e3ea Mon Sep 17 00:00:00 2001
|
|
From: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Date: Fri, 1 Mar 2019 09:18:54 +0100
|
|
Subject: [PATCH] can: flexcan: rename struct
|
|
flexcan_priv::reg_imask{1,2}_default to rx_mask{1,2}
|
|
|
|
The flexcan IP core has up to 64 mailboxes, each one has a corresponding
|
|
interrupt bit in the iflag1 or iflag2 registers and a mask bit in the
|
|
imask1 or imask2 registers.
|
|
|
|
In the timestamp (i.e. non FIFO) mode the driver needs to mask out all
|
|
non RX interrupt sources and uses the precomputed values
|
|
reg_imask1_default and reg_imask2_default of struct flexcan_priv for
|
|
this.
|
|
|
|
However in the current driver the reg_imask{1,2}_default cannot be used
|
|
directly to get the pending RX interrupts. The TX interrupt is part of
|
|
these variables, so it needs to be masked out, too.
|
|
|
|
This is a preparation patch to clean up calculation of the pending RX
|
|
interrupts, it only renames the variables from
|
|
|
|
reg_imask{1,2}_default
|
|
|
|
to
|
|
|
|
rx_mask{1,2}
|
|
|
|
To better reflect their meaning after the complete conversion. This
|
|
change is done with the following sed command:
|
|
|
|
sed -i -e "s/reg_imask\(1\|2\)_default/rx_mask\1/" drivers/net/can/flexcan.c
|
|
|
|
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
---
|
|
drivers/net/can/flexcan.c | 22 +++++++++++-----------
|
|
1 file changed, 11 insertions(+), 11 deletions(-)
|
|
|
|
--- a/drivers/net/can/flexcan.c
|
|
+++ b/drivers/net/can/flexcan.c
|
|
@@ -278,8 +278,8 @@ struct flexcan_priv {
|
|
u8 clk_src; /* clock source of CAN Protocol Engine */
|
|
|
|
u32 reg_ctrl_default;
|
|
- u32 reg_imask1_default;
|
|
- u32 reg_imask2_default;
|
|
+ u32 rx_mask1;
|
|
+ u32 rx_mask2;
|
|
|
|
struct clk *clk_ipg;
|
|
struct clk *clk_per;
|
|
@@ -886,9 +886,9 @@ static inline u64 flexcan_read_reg_iflag
|
|
struct flexcan_regs __iomem *regs = priv->regs;
|
|
u32 iflag1, iflag2;
|
|
|
|
- iflag2 = priv->read(®s->iflag2) & priv->reg_imask2_default &
|
|
+ iflag2 = priv->read(®s->iflag2) & priv->rx_mask2 &
|
|
~FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
|
|
- iflag1 = priv->read(®s->iflag1) & priv->reg_imask1_default;
|
|
+ iflag1 = priv->read(®s->iflag1) & priv->rx_mask1;
|
|
|
|
return (u64)iflag2 << 32 | iflag1;
|
|
}
|
|
@@ -1233,8 +1233,8 @@ static int flexcan_chip_start(struct net
|
|
/* enable interrupts atomically */
|
|
disable_irq(dev->irq);
|
|
priv->write(priv->reg_ctrl_default, ®s->ctrl);
|
|
- priv->write(priv->reg_imask1_default, ®s->imask1);
|
|
- priv->write(priv->reg_imask2_default, ®s->imask2);
|
|
+ priv->write(priv->rx_mask1, ®s->imask1);
|
|
+ priv->write(priv->rx_mask2, ®s->imask2);
|
|
enable_irq(dev->irq);
|
|
|
|
/* print chip status */
|
|
@@ -1328,8 +1328,8 @@ static int flexcan_open(struct net_devic
|
|
priv->tx_mb_idx = priv->mb_count - 1;
|
|
priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
|
|
|
|
- priv->reg_imask1_default = 0;
|
|
- priv->reg_imask2_default = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
|
|
+ priv->rx_mask1 = 0;
|
|
+ priv->rx_mask2 = FLEXCAN_IFLAG2_MB(priv->tx_mb_idx);
|
|
|
|
priv->offload.mailbox_read = flexcan_mailbox_read;
|
|
|
|
@@ -1341,12 +1341,12 @@ static int flexcan_open(struct net_devic
|
|
|
|
imask = GENMASK_ULL(priv->offload.mb_last,
|
|
priv->offload.mb_first);
|
|
- priv->reg_imask1_default |= imask;
|
|
- priv->reg_imask2_default |= imask >> 32;
|
|
+ priv->rx_mask1 |= imask;
|
|
+ priv->rx_mask2 |= imask >> 32;
|
|
|
|
err = can_rx_offload_add_timestamp(dev, &priv->offload);
|
|
} else {
|
|
- priv->reg_imask1_default |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
|
|
+ priv->rx_mask1 |= FLEXCAN_IFLAG_RX_FIFO_OVERFLOW |
|
|
FLEXCAN_IFLAG_RX_FIFO_AVAILABLE;
|
|
err = can_rx_offload_add_fifo(dev, &priv->offload,
|
|
FLEXCAN_NAPI_WEIGHT);
|